FURY GOLD MINES LTD

Sample Preparation, Analyses and Security

Fury Gold manages its exploration samples from their collection points. For drilling, the foreman or driller transports drill core in closed and secured core boxes from the drill to the onsite core-logging facility, where they are received by a geologist or a geological technician. The core boxes are arranged in numerical order, opened, measured and inspected for any drill site numbering or measurement discrepancies. Prior to storage, boxes are tagged with aluminum labels.

Samples are systematically hand oriented in the core box by reference to rock foliation and end matched where possible before being marked for cutting.

While core is logged, mineralized sections are described, measured and marked for sampling with assay tags placed at the end of each sample. A technician selects the interval and saws it in half lengthwise along the core axis perpendicular to core foliation. Core is replaced in position in the core box with the 'top' half of the sawn sample interval placed in a plastic sample bag along with a copy of the assay tag. The sample bag is sealed with a plastic tie. The remaining half-core interval is left in the core box and stored as a permanent record or for further sampling and review.

Individual core samples were placed in rice bags which were sealed using uniquely numbered zip ties. Completed sample shipments for the Extension Program in 2020 and early 2021 and all 2022 drilling were sent to ALS Lab in Val d'Or, QC (ISO/IEC 17025:2017 and ISO 9001:2015 accredited facility) for preparation and analysis.

Each sample batch is logged into a master manifest listing the sample shipment and a sample shipping list is attached to the first bag of the shipment. At every staging point from camp to the final destination, all parties handling the samples are required to confirm that the number of physical samples received in sample transport sign-off.

Sampling, Analysis and Data Verification

Fury Gold** **has adapted the historical Analytical Quality Assurance Program at Eau Claire to control and assure the analytical quality of assays. This protocol includes the systematic addition of blank samples and certified standards to each batch of samples sent for analysis at commercial laboratories. Blank samples are used to check for possible contamination in laboratories, while certified standards determine the analytical accuracy and precision of the laboratory procedure. Generally, check sample inserts approximate 10% of sample flow from project sites.

Pulp (inline split of 100-150 g) and coarse reject (inline split of 250-500 g) lab duplicates are also acquired by the primary lab at a rate of 2 each per hundred samples submitted and shipped to a second independent lab for further sample QA/QC.

Sample shipments from the exploration program in 2021 were sent to Actlabs in Val d'Or, QC for preparation and then to Actlabs in Thunder Bay, ON for analysis. All samples are assayed using 50 g nominal weight fire assay with atomic absorption finish (1A2B-50) and multi-element four acid digest ICP-AES/ICP-MS method (1F2). Where 1A2B-50 results were greater than 5 ppm Au the assay were repeated with 50 g nominal weight fire assay with gravimetric finish (1A3-50). QA/QC programs using internal standard samples, field and lab duplicates and blanks indicate good.