AXT INC

Previous wording

Historically silicon wafers or substrates are less expensive than specialty material substrates, such as those that we produce. Electronic circuit designers will generally consider silicon first and only turn to alternative materials if silicon cannot provide the required functionality in terms of power consumption, speed, wave lengths or other specifications. Beginning in 2011, certain applications that had previously used GaAs substrates, specifically the RF chip in mobile phones, adopted a new silicon-based technology called silicon on insulator, or SOI. SOI technology uses a silicon-insulator-silicon layered substrate in place of conventional silicon substrates in semiconductor manufacturing. SOI substrates cost less than GaAs substrates and, although their performance is not as robust as GaAs substrates in

Current wording

Historically silicon wafers or substrates are less expensive than specialty material substrates, such as those that we produce. Electronic circuit designers will generally consider silicon first and only turn to alternative materials if silicon cannot provide the required functionality in terms of power consumption, speed, wave lengths or other specifications. Beginning in 2011, certain applications that had previously used GaAs substrates, specifically the RF chip in mobile phones, adopted a new silicon-based technology called silicon on insulator, or SOI. SOI technology uses a silicon-insulator-silicon layered substrate in place of conventional silicon substrates in semiconductor manufacturing. SOI substrates cost less than GaAs substrates and, although their performance is not as robust as GaAs substrates in terms of power consumption, heat generation and speed, they became acceptable in mobile phones and other applications that were previously dominated by GaAs substrates. The adoption of SOI resulted in decreased GaAs wafer demand, and decreased revenue. If SOI or new silicon-based technologies gain more widespread market acceptance, or are used in more applications, our sales of specialty material-based substrates could be reduced and our business and operating results could be significantly and adversely affected.

Previous wording

An important factor in our success is the extent to which we are able to utilize the available capacity in our manufacturing facilities. A number of factors and circumstances may reduce utilization rates, including periods of industry overcapacity, low levels of customer orders, operating inefficiencies, mechanical failures and disruption of operations due to expansion, power interruptions, fire, flood, other natural disasters or calamities or government-ordered mandatory factory shutdowns, including as a result of the COVID-19 pandemic. Severe air pollution in Beijing can trigger mandatory factory shutdowns. For example, in the first quarter of 2018, over 300 manufacturing companies, including Tongmei, were intermittently shut down by the local government for a total of ten days from February 27 to March 31, due to severe air pollution. Further, we have increased capacity by adding two new sites and this could reduce our utilization rate and increase our depreciation charges. Because many portions of our manufacturing costs are relatively fixed, high utilization rates are critical to our gross margins and operating results. If we fail to achieve acceptable manufacturing volumes or experience product shipment delays, our results of operations will be negatively affected. During periods of decreased demand, we have underutilized our manufacturing lines. If we are unable to improve utilization levels at our facilities during periods of decreased demand and correctly manage capacity, the fixed expense levels will have an adverse effect on our business, financial condition and results of operations. For example, in the three months ended September 30, 2023, our revenue dropped to $17.4 million and our gross margin was only 10.7%.

Current wording

An important factor in our success is the extent to which we are able to utilize the available capacity in our manufacturing facilities. A number of factors and circumstances may reduce utilization rates, including periods of industry overcapacity, low levels of customer orders, operating inefficiencies, mechanical failures and disruption of operations due to expansion, power interruptions, fire, flood, other natural disasters or calamities or government-ordered mandatory factory shutdowns, including as a result of the COVID-19 pandemic. Severe air pollution in Beijing can trigger mandatory factory shutdowns. For example, in the first quarter of 2018, over 300 manufacturing companies, including Tongmei, were intermittently shut down by the local government for a total of ten days from February 27 to March 31, due to severe air pollution. Further, we have increased capacity by adding two new sites and this could reduce our utilization rate and increase our depreciation charges. Because many portions of our manufacturing costs are relatively fixed, high utilization rates are critical to our gross margins and operating results. If we fail to achieve acceptable manufacturing volumes or experience product shipment delays, our results of operations will be negatively affected. During periods of decreased demand, we have underutilized our manufacturing lines. If we are unable to improve utilization levels at our facilities during periods of decreased demand and correctly manage capacity, the fixed

Previous wording

If we receive fewer customer orders than forecasted or if our customers delay or cancel orders, we may not be able to reduce our manufacturing costs in the short-term and our gross margins would be negatively affected. In addition,

Current wording

If we receive fewer customer orders than forecasted or if our customers delay or cancel orders, we may not be able to reduce our manufacturing costs in the short-term and our gross margins would be negatively affected. In addition, lead times required by our customers are shrinking, which reduces our ability to forecast orders and properly balance our capacity utilization.

Previous wording

In September 2018, the Trump Administration announced a list of thousands of categories of goods that became subject to tariffs when imported into the United States from China. This pronouncement imposed tariffs on wafer substrates we imported into the United States. The initial tariff rate was 10% and subsequently was increased to 25%. Approximately 5% of our revenue derives from importing our wafers into the United States. In the first half of 2024 we paid approximately $197,000 in tariffs. In the years ended December 31, 2023, 2022 and 2021 we paid approximately $1.0 million, $3.3 million and $1.3 million, respectively, in tariffs. The future impact of tariffs and trade wars is uncertain.

Current wording

In September 2018, the Trump Administration announced a list of thousands of categories of goods that became subject to tariffs when imported into the United States from China. This pronouncement imposed tariffs on wafer substrates we imported into the United States. The initial tariff rate was 10% and subsequently was increased to 25%. Approximately 6% of our revenue derives from importing our wafers into the United States. In the first three quarters of 2024 we paid approximately $569,000 in tariffs. In the years ended December 31, 2023, 2022 and 2021 we paid approximately $1.0 million, $3.3 million and $1.3 million, respectively, in tariffs. The future impact of tariffs and trade wars is uncertain.

Previous wording

Future tightening of credit markets and concerns regarding the availability of credit may make it more difficult for our customers to raise capital, whether debt or equity, to finance their purchases of capital equipment or of the products we sell. Delays in our customers’ ability to obtain such financing, or the unavailability of such financing, would adversely affect our product sales and revenue and, therefore, harm our business and operating results. We cannot predict the timing, duration of or effect on our business of any future economic downturn or the timing or strength of any subsequent recovery.

Current wording

Future tightening of credit markets and concerns regarding the availability of credit may make it more difficult for our customers to raise capital, whether debt or equity, to finance their purchases of capital equipment or of the products we sell. Delays in our customers’ ability to obtain such financing, or the unavailability of such financing, would adversely affect our product sales and revenue and, therefore, harm our business and operating results. We cannot predict

Previous wording

interest. Several of these companies occupy space within larger facilities owned and/or operated by one of the other investment partners. Several of these partners are engaged in other manufacturing activities at or near the same facility. In some facilities, we share access to certain functions, including water, hazardous waste treatment or air quality treatment. If a partner in any of these ventures experiences problems with its operations, or deliberately withholds or disrupts services, disruptions in the operations of our companies could occur, having a material adverse effect on the financial condition and results of operation in these companies, and correspondingly on our financial condition or results of operations. For example, since gallium is a by-product of aluminum, our raw gallium company in China, which is housed in and receives services from an affiliated aluminum plant, could generate lower production and shipments of gallium as a result of reduced services provided by the aluminum plant. Accordingly, in order to meet customer supply obligations, our supply chain may have to source materials from another independent third-party supplier, resulting in higher costs and reduced gross margin.

Current wording

We have invested in raw material companies in China that produce materials, including 99.99% pure gallium (4N Ga), high purity gallium (6N and 7N Ga), arsenic, germanium, germanium dioxide, pyrolytic boron nitride (pBN) crucibles and boron oxide (B2O3). We purchase a portion of the materials produced by these companies for our use and they sell the remainder of their production to third parties. We consolidate the companies in which we have a majority or controlling financial interest and employ equity accounting for the companies in which we have a smaller ownership interest. Several of these companies occupy space within larger facilities owned and/or operated by one of the other investment partners. Several of these partners are engaged in other manufacturing activities at or near the same facility. In some facilities, we share access to certain functions, including water, hazardous waste treatment or air quality treatment. If a partner in any of these ventures experiences problems with its operations, or deliberately withholds or disrupts services, disruptions in the operations of our companies could occur, having a material adverse effect on the financial condition and results of operation in these companies, and correspondingly on our financial condition or results of operations. For example, since gallium is a by-product of aluminum, our raw gallium company in China, which is housed in and receives services from an affiliated aluminum plant, could generate lower production and shipments of gallium as a result of reduced services provided by the aluminum plant. Accordingly, in order to meet customer supply obligations, our supply chain may have to source materials from another independent third-party supplier, resulting in higher costs and reduced gross margin.

Previous wording

Although the relocation is completed and we are in volume production at the new sites, unforeseen manufacturing issues and restrictions at the new sites could occur. Problems could occur as we add capacity or comply with strict guidelines as customers perform their qualifications. All of this will require us to continue to diligently address the many details that arise at each of our new sites. A failure to properly accomplish this could result in disruption to our production and have a material adverse impact on our revenue, our results of operations and our financial condition. If we fail to meet the product qualification and volume requirements of a customer, we may lose sales to that customer. Our reputation may also be damaged. Any loss of sales could have a material adverse effect on our revenue, our results of operations and our financial condition.

Current wording

with strict guidelines as customers perform their qualifications. All of this will require us to continue to diligently address the many details that arise at each of our new sites. A failure to properly accomplish this could result in disruption to our production and have a material adverse impact on our revenue, our results of operations and our financial condition. If we fail to meet the product qualification and volume requirements of a customer, we may lose sales to that customer. Our reputation may also be damaged. Any loss of sales could have a material adverse effect on our revenue, our results of operations and our financial condition.

Previous wording

example, in the first quarter of 2018, over 300 manufacturing companies, including Tongmei, were intermittently shut down by the local government for a total of ten days from February 27 to March 31 due to severe air pollution. If the government applies restrictions to us or requires mandatory factory shutdowns in the future, then such restrictions or shutdowns could have an adverse impact on our results of operations and our financial condition. Our ability to supply current or new orders could be significantly impacted. Customers could then be required to purchase products from our competitors, causing our competitors to take market share from us.

Current wording

The Chinese government has in the past imposed temporary restrictions on manufacturing facilities, such as the restrictions imposed on polluting factories for the 2008 Olympics and the 2014 Asian Pacific Economic Cooperation event. These restrictions included a shutdown of the transportation of materials and power plants to reduce air pollution. To reduce air pollution in Beijing, the Chinese government has sometimes limited the construction of new, or expansion of existing, facilities by manufacturing companies in the Beijing area or required mandatory factory shutdowns. For example, in the first quarter of 2018, over 300 manufacturing companies, including Tongmei, were intermittently shut down by the local government for a total of ten days from February 27 to March 31 due to severe air pollution. If the government applies restrictions to us or requires mandatory factory shutdowns in the future, then such restrictions or shutdowns could have an adverse impact on our results of operations and our financial condition. Our ability to supply current or new orders could be significantly impacted. Customers could then be required to purchase products from our competitors, causing our competitors to take market share from us.

Previous wording

If demand for the end-user applications for which our products are used decreases, or if manufacturers downstream in our supply chain are unable to develop, market and sell their products, demand for our products will decrease. For example, during 2019 widespread political and economic instability and trade war concerns resulted in a general slowdown and our revenue decreased significantly. Additionally, in the second half of 2016, manufacturers producing and selling passive optical network devices known as EPONs and GPONs experienced a slowdown in demand resulting in surplus inventory on hand. The slowdown persisted until late in 2017. This resulted in a slowdown of sales of our InP substrates used in the PON market. More recently, global business conditions deteriorated, beginning in the second half of 2022. In general, many companies purchased more inventory than needed, in part due to fears of shortages resulting from COVID. In the second quarter of 2022, our revenue totaled $39.5 million. In the fourth quarter of 2022 our revenue declined to $26.8 million, in the second quarter of 2023, our revenue declined to $18.6 million and in the third quarter of 2023, our revenue further declined to $17.4 million. We expect similar cycles of strong demand followed by lower demand will occur for various InP, GaAs or Ge substrates in the future.

Current wording

resulting in surplus inventory on hand. The slowdown persisted until late in 2017. This resulted in a slowdown of sales of our InP substrates used in the PON market. More recently, global business conditions deteriorated, beginning in the second half of 2022. In general, many companies purchased more inventory than needed, in part due to fears of shortages resulting from COVID. In the second quarter of 2022, our revenue totaled $39.5 million. In the fourth quarter of 2022 our revenue declined to $26.8 million, in the second quarter of 2023, our revenue declined to $18.6 million and in the third quarter of 2023, our revenue further declined to $17.4 million. We expect similar cycles of strong demand followed by lower demand will occur for various InP, GaAs or Ge substrates in the future.

Previous wording

Like most technology companies, we could be targeted in cyber-attacks. We face a risk that experienced computer programmers and hackers may be able to penetrate our network security and misappropriate or compromise our confidential and proprietary information, potentially without being detected. Computer programmers and hackers also may be able to develop and deploy viruses, worms, and other malicious software programs that attack our information technology infrastructure and demand a ransom payment. The costs to us to eliminate or alleviate cyber or

Current wording

Like most technology companies, we could be targeted in cyber-attacks. We face a risk that experienced computer programmers and hackers may be able to penetrate our network security and misappropriate or compromise our confidential and proprietary information, potentially without being detected. Computer programmers and hackers also may be able to develop and deploy viruses, worms, and other malicious software programs that attack our information technology infrastructure and demand a ransom payment. The costs to us to eliminate or alleviate cyber or other security problems, bugs, viruses, worms, malicious software programs and security vulnerabilities could be significant, and our efforts to address these problems may not be successful and could result in interruptions and delays that may impede our sales, manufacturing, distribution, accounting or other critical functions.

Previous wording

Our wafer products are complex and may contain defects, including defects resulting from impurities inherent in our raw materials or inconsistencies in our manufacturing processes. We have experienced quality control problems with some of our products, which caused customers to return products to us, reduce orders for our products, or both. If we experience quality control problems, or experience other manufacturing problems, customers may return product for credit, cancel or reduce orders or purchase products from our competitors. We may be unable to maintain or increase sales to our customers and sales of our products could decline. Defects in our products could cause us to incur higher manufacturing costs and suffer product returns and additional service expenses, all of which could adversely impact our operating results. If new products developed by us contain defects when released, our customers may be dissatisfied and

Current wording

Our wafer products are complex and may contain defects, including defects resulting from impurities inherent in our raw materials or inconsistencies in our manufacturing processes. We have experienced quality control problems with some of our products, which caused customers to return products to us, reduce orders for our products, or both. If we experience quality control problems, or experience other manufacturing problems, customers may return product for credit, cancel or reduce orders or purchase products from our competitors. We may be unable to maintain or increase sales to our customers and sales of our products could decline. Defects in our products could cause us to incur higher manufacturing costs and suffer product returns and additional service expenses, all of which could adversely impact our operating results. If new products developed by us contain defects when released, our customers may be dissatisfied and we may suffer negative publicity or customer claims against us, lose sales or experience delays in market acceptance of our new products.

Previous wording

Our industry has in the past experienced periods of oversupply and that has resulted in significantly reduced prices for compound semiconductor devices and components, including our products, both as a result of general economic changes and overcapacity. Oversupply causes greater price competition and can cause our revenue, gross margins and net income to decline. During periods of weak demand, customers typically reduce purchases, delay delivery of products and/or cancel orders for our products. Order cancellations, reductions in order size or delays in orders could occur and would materially adversely affect our business and results of operations. Actions to reduce our costs may be insufficient to align our structure with prevailing business conditions. We may be required to undertake additional cost-cutting measures, and may be unable to invest in marketing, research and development and engineering at

Current wording

Our industry has in the past experienced periods of oversupply and that has resulted in significantly reduced prices for compound semiconductor devices and components, including our products, both as a result of general economic changes and overcapacity. Oversupply causes greater price competition and can cause our revenue, gross margins and net income to decline. During periods of weak demand, customers typically reduce purchases, delay delivery of products and/or cancel orders for our products. Order cancellations, reductions in order size or delays in orders could occur and would materially adversely affect our business and results of operations. Actions to reduce our costs may be insufficient to align our structure with prevailing business conditions. We may be required to undertake additional cost-cutting measures, and may be unable to invest in marketing, research and development and engineering at the levels we believe are necessary to maintain our competitive position. Our failure to make these investments could seriously harm our business.

Previous wording

We might invest in additional joint venture companies in order to remain competitive in our marketplace and ensure a supply of critical raw materials. However, we may not be able to identify additional complementary joint venture opportunities or, even once opportunities are identified, we may not be able to reach agreement on the terms of the business venture with the other investment partners. Further, geopolitical tensions and trade wars could result in government agencies blocking such new joint ventures. New joint ventures could require cash investments or cause us to incur additional liabilities or other expenses, any of which could adversely affect our financial condition and operating results.

Current wording

venture opportunities or, even once opportunities are identified, we may not be able to reach agreement on the terms of the business venture with the other investment partners. Further, geopolitical tensions and trade wars could result in government agencies blocking such new joint ventures. New joint ventures could require cash investments or cause us to incur additional liabilities or other expenses, any of which could adversely affect our financial condition and operating results.

Previous wording

All of our wafer substrates are manufactured in China and in the years 2023, 2022 and 2021, sales to customers in North America, primarily in the U.S., were approximately 10%, 14% and 10% of our revenue, respectively. In September 2018, the Trump Administration announced a list of thousands of categories of goods that became subject to tariffs when imported into the United States from China. This pronouncement imposed tariffs on wafer substrates we imported into the United States. The initial tariff rate was 10% and subsequently was increased to 25%. In the first half of 2024 we paid approximately $197,000 in tariffs. In the years 2023, 2022 and 2021, we paid approximately $1.0 million, $3.3 million and $1.3 million, respectively, in tariffs. The future impact of tariffs and trade wars is uncertain. We may be required to raise prices, which may result in the loss of customers and our business, financial condition and results of operations may be materially harmed. Additionally, it is possible that our business could be adversely impacted by retaliatory trade measures taken by China or other countries in response to existing or future tariffs, which could cause us to raise prices or make changes to our operations, which could materially harm our business, financial condition and results of operations.

Current wording

All of our wafer substrates are manufactured in China and in the years 2023, 2022 and 2021, sales to customers in North America, primarily in the U.S., were approximately 10%, 14% and 10% of our revenue, respectively. In September 2018, the Trump Administration announced a list of thousands of categories of goods that became subject to tariffs when imported into the United States from China. This pronouncement imposed tariffs on wafer substrates we imported into the United States. The initial tariff rate was 10% and subsequently was increased to 25%. In the first three quarters of 2024 we paid approximately $569,000 in tariffs. In the years 2023, 2022 and 2021, we paid approximately $1.0 million, $3.3 million and $1.3 million, respectively, in tariffs. The future impact of tariffs and trade wars is uncertain. We may be required to raise prices, which may result in the loss of customers and our business, financial condition and results of operations may be materially harmed. Additionally, it is possible that our business could be adversely impacted by retaliatory trade measures taken by China or other countries in response to existing or future tariffs, which could cause us to raise prices or make changes to our operations, which could materially harm our business, financial condition and results of operations.

Previous wording

The spread of COVID-19 impacted our operations and financial performance. The outbreak of COVID has triggered references to the SARS outbreak, which occurred in 2003 and affected our business operations. Any severe occurrence of an outbreak of a contagious disease such as COVID-19, SARS, Avian Flu or Ebola may cause us or the government to temporarily close our manufacturing operations in China. In January 2020, virtually all companies in China were ordered to remain closed after the traditional Lunar New Year holiday ended, including our subsidiaries in China. In December 2022, the PRC government ended its zero-COVID policy. If there is a renewed surge of the COVID-19 pandemic in cities in which our PRC subsidiaries and PRC joint ventures are located, the Chinese government may require these companies to close again. If one or more of our key suppliers is required to close for an

Current wording

The spread of COVID-19 impacted our operations and financial performance. The outbreak of COVID has triggered references to the SARS outbreak, which occurred in 2003 and affected our business operations. Any severe occurrence of an outbreak of a contagious disease such as COVID-19, SARS, Avian Flu or Ebola may cause us or the government to temporarily close our manufacturing operations in China. In January 2020, virtually all companies in China were ordered to remain closed after the traditional Lunar New Year holiday ended, including our subsidiaries in China. In December 2022, the PRC government ended its zero-COVID policy. If there is a renewed surge of the COVID-19 pandemic in cities in which our PRC subsidiaries and PRC joint ventures are located, the Chinese government may require these companies to close again. If one or more of our key suppliers is required to close for an extended period, we might not have enough raw material inventories to continue manufacturing operations. In addition, travel restrictions between China and the U.S. were disrupted and this impacted our efficiency. In the future, if our manufacturing operations were closed for a significant period or we experience difficulty in shipping our products, we could lose revenue and market share, which would depress our financial performance and could be difficult to recapture. If one of our key customers is required to close for an extended period, this may delay the placement of new orders. As a result, our revenue would decline.

Previous wording

Approximately 95% of our revenue is from international sales. We expect that sales to customers outside the United States, particularly sales to customers in Japan, Taiwan, Europe and China, will continue to represent a significant portion of our revenue. Therefore, our revenue growth depends significantly on the expansion of our international sales and operations.

Current wording

Approximately 90% of our revenue is from international sales. We expect that sales to customers outside the United States, particularly sales to customers in Japan, Taiwan, Europe and China, will continue to represent a significant portion of our revenue. Therefore, our revenue growth depends significantly on the expansion of our international sales and operations.