CALIX INC

Previous wording

•Limitations on ability to manage third-party risks. Our business with certain third-party manufacturers may represent a relatively small percentage of their revenue. Consequently, our orders may not be given adequate priority if such manufacturers have to allocate limited capacity among competing customers. This could delay supplies of product to us or limit our ability to ramp product volumes within desired timeframes. If any of our manufacturing partners are unable or unwilling to continue manufacturing our products in required volumes and at high quality levels, we would have to identify, qualify and select acceptable alternative manufacturers. The time it takes to qualify new third-party manufacturers could disrupt our ability to maintain continuous supply of product to meet customer requirements. An alternative manufacturer may not be available to us when needed or may not be in a position to satisfy our production requirements at commercially reasonable prices and quality. In addition, we and/or our manufacturers may not be able to negotiate commercially reasonable terms and sufficient quantities of component supplies with component and materials suppliers to meet our manufacturing needs because our purchase volumes may be too low for us to be considered a priority customer for securing supplies, particularly when there are shortages or limited availability of key components and materials. As a result, suppliers could stop selling to us and our manufacturers at commercially reasonable prices, or at all. While we have worked to mitigate the cost impact of recent price increases, those efforts may not be successful. Any such interruption or delay may force us and our manufacturers to seek components or materials from alternative sources, which may not be available, or result in higher prices. Switching suppliers could also force us to redesign our products to accommodate new components and could require us to re-qualify our products with our customers, which would be costly and time consuming. A significant interruption in manufacturing or supply availability for any of these reasons would reduce supply to our customers, which would result in lost revenue and harm our customer relationships.

Current wording

•Limitations on ability to manage third-party risks. Our business with certain third-party manufacturers may represent a relatively small percentage of their revenue. Consequently, our orders may not be given adequate priority if such manufacturers have to allocate limited capacity among competing customers. This could delay supplies of product to us or limit our ability to ramp product volumes within desired timeframes. If any of our manufacturing partners are unable or unwilling to continue manufacturing our products in required volumes and at high quality levels, we would have to identify, qualify and select acceptable alternative manufacturers. The time it takes to qualify new third-party manufacturers could disrupt our ability to maintain continuous supply of product to meet customer requirements. An alternative manufacturer may not be available to us when needed or may not be in a position to satisfy our production requirements at commercially reasonable prices and quality. In addition, we and/or our manufacturers may not be able to negotiate commercially reasonable terms and sufficient quantities of component supplies with component and materials suppliers to meet our manufacturing needs because our purchase volumes may be too low for us to be considered a priority customer for securing supplies, particularly when there are shortages or limited availability of key components and materials. As a result, suppliers could stop selling to us and our manufacturers at commercially reasonable prices, or at all. Any such interruption or delay may force us and our manufacturers to seek components or materials from alternative sources, which may not be available, or result in higher prices. Switching suppliers could also force us to redesign our products to accommodate new components and could require us to re-qualify our products with our customers, which would be costly and time consuming. A significant interruption in manufacturing or supply availability for any of these reasons would reduce supply to our customers, which would result in lost revenue and harm our customer relationships.

Previous wording

•Ability to forecast and manage inventory liability with vendors. We have experienced increases in demand from many customers, in part as a result of higher consumer demand for better internet services and improved Wi-Fi. If we underestimate product demand from our customers, our manufacturers may have inadequate component inventory to meet our demand. If we are not able to adequately anticipate demand, this could interrupt our product manufacturing, increase our cost of revenue associated with expedite fees and air freight and/or result in delays or cancellation of customer orders. If we are unable to deliver products timely to our customers, we may lose customer goodwill or our customers may choose to purchase from other vendors, all of which may have a material negative impact on our revenue and operating results. If we overestimate our product demand, our third-party manufacturers may purchase excess components and build excess inventory, and we could be required to pay for these excess parts or products and their storage costs. For example, as of March 30, 2024, we had inventory deposits totaling $76.1 million to address excess components owned by our CMs and ODMs. Long lead times for component supply, which may be exacerbated by higher demand for certain components, and demand for our products has and is expected to continue to impact our ability to accurately forecast our production requirements. We may incur liabilities for certain component inventory purchases that have been rendered excess or obsolete, which may have an adverse effect on our gross margin, financial condition and results of operations. For example, during the fourth quarter of 2023, we wrote down excess and obsolete inventory and accrued a liability for components at suppliers primarily related to the wind down of our legacy product family that existed before our shift to an all-platform model.

Current wording

•Ability to forecast and manage inventory liability with vendors. We have experienced increases in demand from many customers, in part as a result of higher consumer demand for better internet services and improved Wi-Fi. If we underestimate product demand from our customers, our manufacturers may have inadequate component inventory to meet our demand. If we are not able to adequately anticipate demand, this could interrupt our product manufacturing, increase our cost of revenue associated with expedite fees and air freight and/or result in delays or cancellation of customer orders. If we are unable to deliver products timely to our customers, we may lose customer goodwill or our customers may choose to purchase from other vendors, all of which may have a material negative impact on our revenue and operating results. If we overestimate our product demand, our third-party manufacturers may purchase excess components and build excess inventory, and we could be required to pay for these excess parts or products and their storage costs. For example, as of June 29, 2024, we had inventory deposits totaling $70.3 million to address excess components owned by our CMs and ODMs. Long lead times for component supply, which may be exacerbated by higher demand for certain components, and demand for our products has and is expected to continue to impact our ability to accurately forecast our production requirements. We may incur liabilities for certain component inventory purchases that have been rendered excess or obsolete, which may have an adverse effect on our gross margin, financial condition and results of operations. For example, during the fourth quarter of 2023, we wrote down excess and obsolete inventory and accrued a liability for components at suppliers primarily related to the wind down of our legacy product family that existed before our shift to an all-platform model.

Previous wording

We have platform and managed service offerings that are new and early in their life cycles and subject to uncertain market demand. If our customers are unwilling to adopt these new offerings, install our new products or deploy our new services, or if we are unable to achieve market acceptance of our products and platform, our business and financial results may be harmed. Moreover, adoption of our cloud product offerings, such as our Revenue EDGE, is dependent upon the success of our customers in investing, marketing, selling and deploying broader services—including managed services—to their subscribers, and our ability to differentiate our products from competing or substitutive product and service offerings. For example, our managed services include managed Wi-Fi, network security, parental controls and an ecosystem of services from partners, including Arlo, Bark and Servify. However, if subscriber demand for such services does not grow as expected or declines, or our customers are unable or unwilling to invest in our platform to deploy and market these services, demand for our products may not grow at rates as we anticipate.

Current wording

We have platform and managed service offerings that are new and early in their life cycles and subject to uncertain market demand. If our customers are unwilling to adopt these new offerings, install our new products or deploy our new services, or if we are unable to achieve market acceptance of our products and platform, our business and financial results may be harmed. Moreover, adoption of our cloud product offerings, such as our Revenue EDGE, is dependent upon the success of our customers in investing, marketing, selling and deploying broader services—including managed services—to their subscribers, and our ability to differentiate our products from competing or substitutive product and service offerings. For example, our managed services include managed Wi-Fi, network security, parental controls and an ecosystem of services from partners, including Arlo and Bark. However, if subscriber demand for such services does not grow as expected or declines, or our customers are unable or unwilling to invest in our platform to deploy and market these services, demand for our products may not grow at rates as we anticipate.

Previous wording

For example, in the U.S., certain states have adopted privacy and security laws and regulations which govern the privacy, processing and protection of personal information. Such laws and regulations will be subject to interpretation by various courts and other governmental authorities, thus creating potentially complex compliance issues for us and our future customers and strategic partners. For example, the California Consumer Privacy Act of 2018, or CCPA, went into effect on January 1, 2020. The CCPA creates individual privacy rights for California consumers and increases the privacy and security obligations of entities handling certain personal information. The CCPA provides for civil penalties for violations, as well as a private right of action for data breaches that has increased the likelihood of, and risks associated with data breach litigation. Further, the California Privacy Rights Act, or CPRA, generally went into effect on January 1, 2023, and significantly amends the CCPA. It imposes additional data protection obligations on covered businesses, including additional consumer rights processes, limitations on data uses, new audit requirements for higher risk data, and opt outs for certain uses of sensitive data. It also created a new California data protection agency authorized to issue substantive regulations and could result in increased privacy and information security enforcement. Additional compliance investment and potential business process changes may also be required. Similar laws have been passed in other states, and are continuing to be proposed at the state and federal level, reflecting a trend toward more stringent privacy legislation in the United States. Most of the new or proposed laws include restrictions on processing consumer information for targeted advertising, which could negatively affect our marketing cloud products. The enactment of such laws could have potentially conflicting requirements that would make compliance challenging. In the event that we are subject to or affected by the CCPA, the CPRA or other domestic privacy and data protection laws, any liability from failure to comply with the requirements of these laws could adversely affect our financial condition.

Current wording

For example, in the U.S., certain states have adopted privacy and security laws and regulations which govern the privacy, processing and protection of personal information. Such laws and regulations will be subject to interpretation by various courts and other governmental authorities, thus creating potentially complex compliance issues for us and our future customers and strategic partners. For example, the California Consumer Privacy Act of 2018, or CCPA, went into effect on January 1, 2020. The CCPA creates individual privacy rights for California consumers and increases the privacy and security obligations of entities handling certain personal information. The CCPA provides for civil penalties for violations, as well as a private right of action for data breaches that has increased the likelihood of, and risks associated with data breach litigation. Further, the California Privacy Rights Act, or CPRA, generally went into effect on January 1, 2023, and significantly amends the CCPA. It imposes additional data protection obligations on covered businesses, including additional consumer rights processes, limitations on data uses, new audit requirements for higher risk data, and opt outs for certain uses of sensitive data. It also created a new California data protection agency authorized to issue substantive regulations and could result in increased privacy and information security enforcement. Additional compliance investment and potential business process changes may also be required. Similar laws have been passed in other states and are continuing to be proposed at the state and federal level, reflecting a trend toward more stringent privacy legislation in the United States. Most of the new or proposed laws include restrictions on processing consumer information for targeted advertising, which could negatively affect our marketing cloud products. The enactment of such laws could have potentially conflicting requirements that would make compliance challenging. If we are subject to or affected by the CCPA, the CPRA or other domestic privacy and data protection laws, any liability from failure to comply with the requirements of these laws could adversely affect our financial condition.