Modular Medical, Inc.

Previous wording

Our consolidated financial statements as of March 31, 2025 have been prepared under the assumption that we will continue as a going concern twelve months from the date of issuance of this Report. At March 31, 2025, we had cash and cash equivalents of $13.1 million and an accumulated deficit of $84.8 million. In March 2025, we completed a private placement of common stock and warrants for net proceeds to us of approximately $11.4 million. In addition, in November 2024, we completed a public offering of common stock for net proceeds to us of approximately $7.3 million. Even with these offering proceeds, we do not believe that our cash and cash equivalents will be sufficient to fund our operations for the period of 12 months from the date of issuance of this report, and we would need to raise additional capital. As a result of our expected operating losses and cash burn for the foreseeable future and recurring losses from operations, if we are unable to raise sufficient capital through additional debt or equity arrangements, there will be uncertainty regarding our ability to maintain liquidity sufficient to operate our business effectively, which raises substantial doubt as to our ability to continue as a going concern. If we cannot continue as a viable entity, our stockholders would likely lose most or all of their investment in us.

Current wording

Our consolidated financial statements as of March 31, 2026 have been prepared under the assumption that we will continue as a going concern twelve months from the date of issuance of this Report. At March 31, 2026, we had cash and cash equivalents of $6.9 million and an accumulated deficit of $113.0 million. Subsequent to March 31, 2026, in April 2026, we closed a public offering for net proceeds of approximately $3.0 million. Even with these proceeds, we do not believe that our cash and cash equivalents will be sufficient to fund our operations for the next 12 months, and we will need to raise additional capital. As a result of our expected operating losses and cash burn for the foreseeable future and recurring losses from operations, if we are unable to raise sufficient capital through additional debt or equity arrangements, there will be uncertainty regarding our ability to maintain liquidity sufficient to operate our business effectively, which raises substantial doubt as to our ability to continue as a going concern. If we cannot continue as a viable entity, our shareholders would likely lose most or all of their investment in us. If we are unable to generate sustainable operating profit and sufficient cash flows, then our future success will depend on our ability to raise capital. We intend to seek additional financing and evaluate financing alternatives in order to meet our cash requirements for the foreseeable future. We cannot be certain that raising additional capital, whether through selling additional debt or equity securities or obtaining a line of credit or other loan, will be available to us or, if available, will be on terms acceptable to us. If we issue additional securities to raise funds, these securities may have rights, preferences, or privileges senior to those of our common stock, and our current stockholders may experience dilution. If we are unable to obtain funds when needed or on acceptable terms, we may be required to curtail our current product development programs, cut operating costs, forego future development and other opportunities or even terminate our operations.

Previous wording

We are a pre-revenue medical device company and have a history of significant operating losses; we expect to continue to incur operating losses, and we may never achieve or maintain profitability.

Current wording

We are an early commercial-stage medical device company and have a history of significant operating losses; we expect to continue to incur operating losses, and we may never achieve or maintain profitability.

Previous wording

We do not currently have revenues to generate cash flows to cover operating expenses. Since our inception, we have incurred operating losses in each year due to costs incurred in connection with research and development activities and general and administrative expenses associated with our operations. For the years ended March 31, 2025 and, 2024, we incurred net losses of approximately $18.9 million and $17.5 million, respectively. As a result, we will need to raise additional capital in the future, which may or may not be available to us at all or only on unfavorable terms.

Current wording

We do not currently have revenues to generate cash flows to cover operating expenses. Since our inception, we have incurred operating losses each year due to costs incurred in connection with research and development activities and general and administrative expenses associated with our operations. For the years ended March 31, 2026 and 2025, we incurred net losses of approximately $28.2 million and $18.8 million, respectively. As a result, we will need to raise additional capital in the future, which may or may not be available to us at all or only on unfavorable terms.

Previous wording

We expect to incur losses for the foreseeable future as we continue the development of, and seek regulatory clearance and approvals for, our insulin pump. Our MODD1 insulin pump is currently our only product, if it fails to gain market acceptance, we will not be able to generate any revenue, or explore other opportunities to enhance stockholder value, such as through a sale. If we fail to generate revenue and eventually become profitable, or if we are unable to fund our continuing losses, our stockholders could lose all or a substantial part of their investment.

Current wording

We expect to incur losses for the foreseeable future as we continue to commercialize and seek to expand market acceptance of our insulin pump products. Our Pivot insulin pump is currently our only commercial product, and, if it fails to gain market acceptance, we may not be able to generate sufficient revenue, or explore other opportunities to enhance stockholder value, such as through a sale. If we fail to generate sufficient revenue and eventually become profitable, or if we are unable to fund our continuing losses, our stockholders could lose all or a substantial part of their investment.

Previous wording

The discovery, development, and commercialization of new medical devices, such as our insulin pump, entails significant costs. We have completed the engineering and mechanical development of our insulin pump and cartridge, and obtained FDA clearance. In addition, we have also implemented a production-level manufacturing process, including purchasing required equipment for low-level manufacturing. We have developed a follow-on product, our Pivot pump, to, among other things, meet the general needs and preferences of the Almost Pumper marketplace and the guidelines of third-party payors. To enable us to accomplish these and other related items and continue to operate our business, we will need to raise substantial additional capital and/or enter into strategic partnerships or joint ventures to enable us to:

Current wording

The discovery, development, and commercialization of new medical devices, such as our insulin pump, entails significant costs. We have completed the engineering and mechanical development of our insulin pump and cartridge, and obtained FDA clearance for our Pivot product. In addition, we have also implemented a production-level manufacturing process with a tier-one manufacturing partner. In June 2026, we announced commercial availability of our Pivot product and commenced initial shipments. To enable us to expand commercial activities and continue to operate our business, we will need to raise substantial additional capital and/or enter into strategic partnerships or joint ventures to enable us to:

Previous wording

Until we can generate a sufficient amount of product revenue to finance our cash requirements, which we may never achieve, we expect to finance our cash needs primarily through public or private equity offerings, debt financings or through the establishment of possible strategic alliances. We may in the future seek additional capital from public or private offerings of our capital stock or borrow additional amounts under new credit lines or from other sources. If we issue equity or debt securities to raise additional funds, our existing stockholders may experience dilution, we may incur significant financing costs, and the new equity or debt securities may have rights, preferences and privileges senior to those of our existing stockholders. In addition, if we raise additional funds through collaborations, licensing, joint ventures, strategic alliances, partnership arrangements or other similar arrangements, it may be necessary to relinquish valuable rights to the MODD1 pump or our potential future products or proprietary technologies or grant licenses on terms that are not favorable to us.

Current wording

Until we can generate a sufficient amount of product revenue to finance our cash requirements, which we may never achieve, we expect to finance our cash needs primarily through public or private equity offerings, debt financings or through the establishment of possible strategic alliances. We may in the future seek additional capital from public or private offerings of our capital stock or borrow additional amounts under new credit lines or from other sources. If we issue equity or debt securities to raise additional funds, our existing stockholders may experience dilution, we may incur significant financing costs, and the new equity or debt securities may have rights, preferences and privileges senior to those of our existing stockholders. In addition, if we raise additional funds through collaborations, licensing, joint ventures, strategic alliances, partnership arrangements or other similar arrangements, it may be necessary to relinquish valuable rights to our pump products or our potential future products or proprietary technologies or grant licenses on terms that are not favorable to us.

Previous wording

Before we can market a new medical device, such as our insulin pump, we must first receive clearance under Section 510(k) of the Federal Food, Drug, and Cosmetic Act, or the “FDCA.” In the 510(k) clearance process, before a device may be marketed, the FDA must determine that such proposed device is “substantially equivalent” to a legally-marketed “predicate” device, which includes a device that has been previously cleared through the 510(k) process, a device that was legally marketed prior to May 28, 1976 (pre- amendments device), a device that was originally on the U.S. market pursuant to a premarket approval (PMA) and later down- classified, or a 510(k)-exempt device. To be “substantially equivalent,” the proposed device must have the same intended use as the predicate device, and either have the same technological characteristics as the predicate device or have different technological characteristics and not raise different questions of safety or effectiveness than the predicate device. In September 2024, we received FDA clearance to market and sell our initial pump product, our MODD1, in the United States.

Current wording

Before we can market a new medical device, such as our insulin pump, we must first receive clearance under Section 510(k) of the Federal Food, Drug, and Cosmetic Act, or the “FDCA.” In the 510(k) clearance process, before a device may be marketed, the FDA must determine that such proposed device is “substantially equivalent” to a legally-marketed “predicate” device, which includes a device that has been previously cleared through the 510(k) process, a device that was legally marketed prior to May 28, 1976 (preamendments device), a device that was originally on the U.S. market pursuant to a premarket approval (PMA) and later down classified, or a 510(k)-exempt device. To be “substantially equivalent,” the proposed device must have the same intended use as the predicate device, and either have the same technological characteristics as the predicate device or have different technological characteristics and not raise different questions of safety or effectiveness than the predicate device. We have received FDA clearance to market and sell our initial pump products, our MODD1 and Pivot, in the United States. Our Pivot product is the product that we intend to commercialize in the fall of 2026.

Previous wording

Our Pivot product, which will be our second product after our MODD1 product, will require a new 510(k) clearance. The 510(k) clearance process can be expensive, lengthy and uncertain. The FDA’s 510(k) clearance process usually takes less than 12 months, but it can last longer. Despite the time, effort and cost, a device may not be approved or cleared by the FDA. Any delay or failure to obtain necessary regulatory authorizations could harm our business, including our ability to commercialize our future product candidates and our stockholders could lose their entire investment. Furthermore, even if we are granted the required regulatory authorizations, such authorizations may be subject to significant limitations on the indicated uses for the device, which may limit the market for our future product candidates.

Current wording

We expect that future versions of our pump products will require FDA 510(k) approvals. The 510(k) clearance process can be expensive, lengthy and uncertain. The FDA’s 510(k) clearance process usually takes less than 12 months, but it can last longer. Despite the time, effort and cost, a device may not be approved or cleared by the FDA. Any delay or failure to obtain necessary regulatory authorizations could harm our business, including our ability to commercialize our future product candidates and our stockholders could lose their entire investment. Furthermore, even if we are granted the required regulatory authorizations, such authorizations may be subject to significant limitations on the indicated uses for the device, which may limit the market for our future product candidates.

Previous wording

The development, manufacture, and marketing of our product candidates outside the United States is subject to government regulation. In most foreign countries, we must complete rigorous pre-clinical testing and extensive human clinical trials that demonstrate the safety and efficacy of a product in order to apply for regulatory approval to market the product. If foreign regulatory authorities grant regulatory approval of a product, the approval may be limited to specific indications or limited with respect to its distribution. Expanded or additional indications for approved devices may not be approved, which could limit our potential revenues. Foreign regulatory authorities may refuse to grant any approval. Consequently, even if we believe that pre- clinical and clinical data are sufficient to support regulatory approval for our products, foreign regulatory authorities may not ultimately grant approval for commercial sale in any jurisdiction. If our product candidates are not approved in such jurisdictions, our ability to generate revenues will be limited and our business will be adversely affected.

Current wording

The development, manufacture, and marketing of our product candidates outside the United States is subject to government regulation. In most foreign countries, we must complete rigorous pre-clinical testing and extensive human clinical trials that demonstrate the safety and efficacy of a product in order to apply for regulatory approval to market the product. If foreign regulatory authorities grant regulatory approval of a product, the approval may be limited to specific indications or limited with respect to its distribution. Expanded or additional indications for approved devices may not be approved, which could limit our potential revenues. Foreign regulatory authorities may refuse to grant any approval. Consequently, even if we believe that preclinical and clinical data are sufficient to support regulatory approval for our products, foreign regulatory authorities may not ultimately grant approval for commercial sale in any jurisdiction. If our product candidates are not approved in such jurisdictions, our ability to generate revenues will be limited and our business will be adversely affected.

Previous wording

In order to conduct larger-scale or late-stage clinical studies and for commercialization of our insulin pump products, if 510(k) clearance is granted for any product, we will need to manufacture it in larger quantities. We may not be able to successfully increase the manufacturing capacity for our MODD 1 product or future product candidates in a timely or cost-effective manner, or at all. In addition, quality issues may arise during scale-up activities. If we are unable to successfully scale up the manufacture of our product candidate in sufficient quality and quantity, the development and testing of our product candidates and regulatory approval or commercial launch may be delayed, which could significantly harm our business.

Current wording

In order to conduct larger-scale or late-stage clinical studies and for commercialization of our insulin pump products, we will need to manufacture it in larger quantities. We may not be able to successfully increase the manufacturing capacity for our Pivot product or future product candidates in a timely or cost-effective manner, or at all. In addition, quality issues may arise during scale-up activities. If we are unable to successfully scale up the manufacture of our product candidates in sufficient quality and quantity, the development and testing of our product candidates and regulatory approval or commercial launch may be delayed, which could significantly harm our business.

Previous wording

The future manufacture of our product will require the timely delivery of sufficient amounts of components from multiple suppliers in various countries. We intend to work closely with our suppliers to ensure continuity of supply, but we cannot guarantee these efforts will be successful. Due to the supply chain issues experienced by the semiconductor industry, at times, we have experienced delays obtaining integrated circuits from certain suppliers. We may need to enter into “take or pay” contracts with suppliers. We have also seen price increases for various components. We do not have supply agreements with any of our suppliers, and we make purchases based on individual purchase orders. An interruption, delay, or inability to obtain components from our third-party suppliers at acceptable prices in a timely manner, could hinder our ability to manufacture our products and have a material adverse effect on our business, prospects, financial condition and results of operations.

Current wording

The manufacture of our product will require the timely delivery of sufficient amounts of components from multiple suppliers in various countries. We have been working closely with our suppliers to ensure continuity of supply, but we cannot guarantee these efforts will be successful. Due to the supply chain issues experienced by the semiconductor industry, at times, we have experienced delays obtaining integrated circuits from certain suppliers. We may need to enter into “take or pay” contracts with suppliers. We have also seen price increases for various components. We do not have supply agreements with any of our suppliers, and we make purchases based on individual purchase orders. An interruption, delay, or inability to obtain components from our third-party suppliers at acceptable prices in a timely manner, could hinder our ability to manufacture our products and have a material adverse effect on our business, prospects, financial condition and results of operations.

Previous wording

The marketing and sale of our insulin pump exposes us to the risk of significant damages from product liability and other claims, and the use of our product in clinical studies may result in adverse effects from liability claims. We cannot predict all the possible harms or adverse effects that may result. We intend to obtain product liability insurance to provide some protection from claims. Nonetheless, we may not have sufficient resources to pay for any liabilities resulting from a personal injury or other claim, even if it is partially covered by insurance. In addition to the possibility of direct claims, we may be required to indemnify third parties against damages and other liabilities arising out of our development, commercialization and other business activities, which would increase our liability exposure. If third parties that have agreed to indemnify us fail to do so, we may be held responsible for those damages and other liabilities as well.

Current wording

The marketing and sale of our insulin pump exposes us to the risk of significant damages from product liability and other claims, and the use of our product in clinical studies may result in adverse effects from liability claims. We cannot predict all the possible harms or adverse effects that may result. We have obtained product liability insurance to provide some protection from potential claims. Nonetheless, we may not have sufficient resources to pay for any liabilities resulting from a personal injury or other claim, even if it is partially covered by insurance. In addition to the possibility of direct claims, we may be required to indemnify third parties against damages and other liabilities arising out of our development, commercialization and other business activities, which would increase our liability exposure. If third parties that have agreed to indemnify us fail to do so, we may be held responsible for those damages and other liabilities as well.

Previous wording

Our insulin pump products are subject to extensive regulation by the FDA. These regulations relate to manufacturing, labeling, sale, promotion, distribution and shipping. Before a new medical device, or a new intended use of a legally marketed device, can be marketed in the United States, it must be cleared or approved by the FDA through the applicable premarket review process (510(k), PMA, orde novo classification), unless an exemption applies. While we have received 510(k) clearance for our initial insulin pump product, the MODD1, we may be required to obtain new 510(k) clearances for significant post-market modifications to the pump. For example, our Pivot product, which we expect over time to replace the MODD1 product, will require 510(k) clearance. Each premarket submission and review process can be expensive and lengthy, and entail significant user fees, unless exempt.

Current wording

Our insulin pump products are subject to extensive regulation by the FDA. These regulations relate to manufacturing, labeling, sale, promotion, distribution and shipping. Before a new medical device, or a new intended use of a legally marketed device, can be marketed in the United States, it must be cleared or approved by the FDA through the applicable premarket review process (510(k), PMA, or de novo classification), unless an exemption applies. While we have received 510(k) clearance for our initial insulin pump products, the MODD1 and Pivot, we may be required to obtain new 510(k) clearances for significant, post-market modifications to our pump products. Each premarket submission and review process can be expensive and lengthy, and entail significant user fees, unless exempt.

Previous wording

We have applied to the U.S. Patent and Trademark Office, or the USPTO, and various foreign patent agencies for patents on our proprietary fluid movement technology and our insulin delivery methodology. To date, the USPTO has granted five patents to us, and we have been awarded two patents by foreign jurisdictions. We have additional applications pending and in various stages of review by the USPTO and foreign patent agencies. There can be no assurance that we will be issued additional patents by the USPTO or foreign patent agencies and that any of our patents will prevent other companies from competing with us. We will continue to attempt to patent our innovations, as appropriate, to help ensure a sustainable competitive advantage.

Current wording

We have applied to the U.S. Patent and Trademark Office, or the USPTO, and various foreign patent agencies for patents on our proprietary fluid movement technology and our insulin delivery methodology. To date, the USPTO has granted six patents to us, and we have been awarded four patents by foreign jurisdictions. We have additional applications pending and in various stages of review by the USPTO and foreign patent agencies. There can be no assurance that we will be issued additional patents by the USPTO or foreign patent agencies and that any of our patents will prevent other companies from competing with us. We will continue to attempt to patent our innovations, as appropriate, to help ensure a sustainable competitive advantage.

Previous wording

We have established initial, low-volume manufacturing capability in our facility and with a tier one medical device contract manufacturer. We and the contract manufacturer of our insulin pump products will be required to comply with the FDA’s quality system regulations, which impose a complex regulatory framework that covers the procedures and documentation of the design, testing, production, control, quality assurance, labeling, packaging, sterilization, storage and shipping of medical devices. The FDA enforces its quality system regulations through periodic unannounced inspections. We cannot assure you that, in the future, any manufacturing facilities owned by us or any contract manufacturer will pass any quality system inspection. In the event that our or any contract manufacturer’s facilities fails a quality system inspection, the manufacturing or distribution of our products could be interrupted and our operations disrupted. Failure to take adequate and timely corrective action in response to an adverse quality system inspection could force a suspension or shutdown of any packaging and labeling operations or then manufacturing operations of any contract manufacturers, or a recall of our insulin pump products. If any of these events were to occur, we at such time would not be able to provide our customers with the quantity of insulin pumps that they require on a timely basis, our reputation could be harmed and we could lose any customers we then have, any or all of which could have a material adverse effect on our business, financial condition and results of operations.

Current wording

We have established initial, low-volume manufacturing capability in our facility and with a tier one medical device contract manufacturer. We and the contract manufacturer of our insulin pump products will be required to comply with the FDA’s quality system regulations, which impose a complex regulatory framework that covers the procedures and documentation of the design, testing, production, control, quality assurance, labeling, packaging, sterilization, storage and shipping of medical devices. The FDA enforces its quality system regulations through periodic unannounced inspections. We cannot assure that, in the future, any manufacturing facilities owned by us or any contract manufacturer will pass any quality system inspection. In the event that our or any contract manufacturer’s facilities fails a quality system inspection, the manufacturing or distribution of our products could be interrupted and our operations disrupted. Failure to take adequate and timely corrective action in response to an adverse quality system inspection could force a suspension or shutdown of any packaging and labeling operations or then manufacturing operations of any contract manufacturers, or a recall of our insulin pump products. If any of these events were to occur, we at such time would not be able to provide our customers with the quantity of insulin pumps that they require on a timely basis, our reputation could be harmed and we could lose any customers we then have, any or all of which could have a material adverse effect on our business, financial condition and results of operations.

Previous wording

Our insulin pump products will be subject to recalls, which would harm our reputation, business operations and financial results.

Current wording

Our insulin pump products may be subject to recalls, which would harm our reputation, business operations and financial results.

Previous wording

Our current insulin pump is not yet eligible for reimbursement and is not approved for insurance coverage. The future availability of insurance coverage and reimbursement for newly approved medical devices is highly uncertain. In the United States, patients using insulin pumps are generally reimbursed for all or part of the product cost by Medicare or other third-party payors. Any future commercial success of our insulin pump products will be substantially dependent on whether third-party coverage and reimbursement is available for future customers. Medicare, Medicaid, health maintenance organizations and other third-party payors are increasingly attempting to contain healthcare costs by limiting both coverage and the level of reimbursement of new medical devices, and, as a result, they may not cover or provide adequate reimbursement for our insulin pump, assuming we are able to fully develop and obtain all regulatory approval to market it in the United States. In addition, in certain countries, no uniform policy of coverage and reimbursement for medical device products and services exists among third- party payors. Therefore, coverage and reimbursement for medical device products and services can differ significantly from payor to payor. In addition, payors continually review new technologies for possible coverage and can, without notice, deny coverage for these new products and procedures. As a result, the coverage determination process is often a time-consuming and costly process that will require us to provide scientific and clinical support for the use of our products to each payor separately, with no assurance that coverage and adequate reimbursement will be obtained or maintained, if obtained. Reimbursement systems in international markets vary significantly by country and by region within some countries, and reimbursement approvals must be obtained on a country-by-country basis. In many international markets, a product must be approved for reimbursement before it can be approved for sale in that country. Further, many international markets have government-managed healthcare systems that control reimbursement for new devices and procedures. Accordingly, unless government and other third-party payors provide coverage and reimbursement for our insulin pump products, patients may not use it, which would cause investors to lose their entire investment.

Current wording

Our Pivot insulin pump is not yet eligible for reimbursement and is not approved for insurance coverage. The future availability of insurance coverage and reimbursement for newly approved medical devices is highly uncertain. In the United States, patients using insulin pumps are generally reimbursed for all or part of the product cost by Medicare or other third-party payors. Any future commercial success of our insulin pump products will be substantially dependent on whether third-party coverage and reimbursement is available for future customers. Medicare, Medicaid, health maintenance organizations and other third-party payors are increasingly attempting to contain healthcare costs by limiting both coverage and the level of reimbursement of new medical devices, and, as a result, they may not cover or provide adequate reimbursement for our insulin pump, assuming we are able to fully develop and obtain all regulatory approval to market it in the United States. In addition, in certain countries, no uniform policy of coverage and reimbursement for medical device products and services exists among third- party payors. Therefore, coverage and reimbursement for medical device products and services can differ significantly from payor to payor. In addition, payors continually review new technologies for possible coverage and can, without notice, deny coverage for these new products and procedures. As a result, the coverage determination process is often a time-consuming and costly process that will require us to provide scientific and clinical support for the use of our products to each payor separately, with no assurance that coverage and adequate reimbursement will be obtained or maintained, if obtained. Reimbursement systems in international markets vary significantly by country and by region within some countries, and reimbursement approvals must be obtained on a country-by-country basis. In many international markets, a product must be approved for reimbursement before it can be approved for sale in that country. Further, many international markets have government-managed healthcare systems that control reimbursement for new devices and procedures. Accordingly, unless government and other third-party payors provide coverage and reimbursement for our insulin pump products, patients may not use it, which would cause investors to lose their entire investment.

Previous wording

If we are unable to satisfy the continued listing requirements of the Nasdaq, our common stock could be delisted and the price and liquidity of our common stock may be adversely affected.

Current wording

If we are unable to satisfy the continued listing requirements of Nasdaq, our common stock could be delisted and the price and liquidity of our common stock may be adversely affected.

Previous wording

As of March 31, 2025, our executive officers, directors and certain persons, who may be deemed affiliates, beneficially owned approximately 14% of our issued and outstanding common stock. Specifically, James Besser, our chief executive officer, and Morgan Frank, a member of our board of directors, are the principals of Manchester Explorer, L.P., our largest stockholder. As of March 31, 2025, in the aggregate, Messrs. Besser and Frank were the beneficial owners of approximately 9% of our outstanding common stock. As a result, such persons may exercise substantial influence over the outcome of corporate actions requiring stockholder approval including, without limitation, the election of directors, certain mergers, consolidations and sales of all or substantially all of our assets or any other significant corporate transactions. Such persons may also vote against a change of control, even if such a change of control would benefit our other stockholders. Thus, investors in our common stock cannot reasonably expect to have any influence over the election of our directors or other matters submitted to a vote of our stockholders. Instead, our existing significant stockholders may exert a substantial influence on the election of our directors and any actions requiring or otherwise put to a stockholder vote, potentially in a manner that you do not support. The concentrated amount of control over our affairs held by a relatively few significant investors could serve to reduce the attractiveness or liquidity of our common stock, and thereby depress its trading price. Additionally, conflicts of interest may arise between these executive officers, directors and other affiliates, on the one hand, and us and our other stockholders, on the other hand. In resolving these conflicts of interests, these investors may favor their own interests and the interests of their affiliates, over the interests of our other stockholders, which could cause a material adverse effect on our business, prospects, financial condition and results of operations.*** ***

Current wording

As of March 31, 2026, our executive officers, directors and certain persons, who may be deemed affiliates, owned approximately 5.4% of our issued and outstanding common stock. Specifically, James Besser, our chief executive officer, and Morgan Frank, a member of our board of directors, are the principals of Manchester Explorer, L.P., our largest stockholder. As of March 31, 2026, in the aggregate, Messrs. Besser and Frank were the owners of approximately 3.4% of our outstanding common stock. As a result, such persons may exercise substantial influence over the outcome of corporate actions requiring stockholder approval including, without limitation, the election of directors, certain mergers, consolidations and sales of all or substantially all of our assets or any other significant corporate transactions. Such persons may also vote against a change of control, even if such a change of control would benefit our other stockholders. Thus, investors in our common stock cannot reasonably expect to have any influence over the election of our directors or other matters submitted to a vote of our stockholders. Instead, our existing significant stockholders may exert a substantial influence on the election of our directors and any actions requiring or otherwise put to a stockholder vote, potentially in a manner that you do not support. The concentrated amount of control over our affairs held by a relatively few significant investors could serve to reduce the attractiveness or liquidity of our common stock, and thereby depress its trading price. Additionally, conflicts of interest may arise between these executive officers, directors and other affiliates, on the one hand, and us and our other stockholders, on the other hand. In resolving these conflicts of interests, these investors may favor their own interests and the interests of their affiliates, over the interests of our other stockholders, which could cause a material adverse effect on our business, prospects, financial condition and results of operations.

Previous wording

Effective internal controls are necessary for us to provide reliable financial reports and prevent fraud. If we cannot provide reliable financial reports or prevent fraud, we may not be able to manage our business as effectively as we would if an effective control environment existed, and our business and reputation with investors may be harmed. If we are unable to maintain effective internal controls, we may not have adequate, accurate or timely financial information, and we may be unable to meet our reporting obligations as a public company, including the requirements of the Sarbanes-Oxley Act of 2002 (the Sarbanes-Oxley Act). In addition, we may be unable to accurately report our financial results in future periods or report them within the timeframes required by the requirements of the SEC or the Sarbanes-Oxley Act. Failure to comply with the Sarbanes-Oxley Act, when and as applicable, could also potentially subject us to sanctions or investigations by the SEC or other regulatory authorities. Any failure to maintain or implement required new or improved controls, or any difficulties we encounter in their implementation, could result in identification of additional material weaknesses or significant deficiencies, cause us to fail to meet our reporting obligations or result in material misstatements in our financial statements.

Current wording

Effective internal controls are necessary for us to provide reliable financial reports and prevent fraud. If we cannot provide reliable financial reports or prevent fraud, we may not be able to manage our business as effectively as we would if an effective control environment existed, and our business and reputation with investors may be harmed. If we are unable to maintain effective internal controls, we may not have adequate, accurate or timely financial information, and we may be unable to meet our reporting obligations as a public company, including the requirements of the Sarbanes-Oxley Act of 2002 (the Sarbanes-Oxley Act). In addition, we may be unable to accurately report our financial results in future periods or report them within the timeframes required by the requirements of the SEC or the Sarbanes-Oxley Act. Failure to comply with the Sarbanes-Oxley Act, when and as applicable, could also potentially subject us to sanctions or investigations by the SEC or other regulatory authorities. Any failure to maintain or implement required new or improved controls, or any difficulties we encounter in their implementation, could result in identification of material weaknesses or significant deficiencies, cause us to fail to meet our reporting obligations or result in material misstatements in our financial statements. As previously reported in our Form 10-Q for the period ended December 31, 2025, we identified a material weaknesses in our internal control over financial reporting. We did not design and maintain effective controls related to the accounting for the warrants issued in the public offering completed in December 2025. In response to this identified material weakness, our management, with the oversight of the Audit Committee of our board of directors, has been actively engaged in remediating the above material weakness. During the quarter ended March 31, 2026, we implemented remediation measures designed to remediate this material weakness. Furthermore, Section 404 of the Sarbanes-Oxley Act and related regulations require our management to evaluate the effectiveness of our internal control over financial reporting as of the end of each fiscal year. Based on its evaluation, our management concluded that our internal controls over financial reporting were effective as of March 31, 2026. We cannot provide assurance that, in the future, a material weakness or significant deficiency will not exist or otherwise be discovered. If that were to happen, it could harm our operating results and cause stockholders to lose confidence in our reported financial information. Any such loss of confidence would have a negative effect on the trading price of our securities.

Previous wording

Inflation rates in the United States have remained elevated and may continue to rise. Inflation over the last several months has led us to experience higher costs, including, among others, labor and transportation. Some of our suppliers have raised their prices and may continue to raise prices, and, assuming we achieve FDA clearance and commence commercialization of our product, in the future, we may not be able to make corresponding price increases to obtain adequate gross margins and achieve profitability. If inflation rates continue to rise or remain elevated for a sustained period of time, they could have a material adverse effect on our business, financial condition, results of operations and liquidity.

Current wording

Inflation rates in the United States have remained elevated and may continue to rise. Inflation over the last several months has led us to experience higher costs, including, among others, labor and transportation. Some of our suppliers have raised their prices and may continue to raise prices, and, as we expand commercialization of our product, in the future, we may not be able to make corresponding price increases to obtain adequate gross margins and achieve profitability. If inflation rates continue to rise or remain elevated for a sustained period of time, they could have a material adverse effect on our business, financial condition, results of operations and liquidity.