Enpro Inc

Previous wording

The markets in which we sell our products and solutions, particularly wafer fab equipment for semiconductor manufacturing, chemical companies, petroleum refineries, heavy-duty trucking, and capital equipment are, to varying degrees, cyclical and have historically experienced periodic downturns. Prior downturns have been characterized by diminished product demand, excess manufacturing capacity and subsequent erosion of average selling prices in these markets resulting in negative effects on our net sales and results of operations. The wafer fab equipment for semiconductor manufacturing market, has historically been characterized by rapid changes in demand due to changes in electronics demand, economic conditions (both general and in the semiconductor and electronics industries), industry supply and demand, prices for semiconductors, and the ability of fabricators to manufacture increasingly complex and costly semiconductor devices. A prolonged and severe downward cycle in our markets, particularly in our semiconductor markets, could have a material adverse effect on our business, financial condition, results of operations and cash flows.

Current wording

The markets in which we sell our products and solutions, particularly wafer fab equipment for semiconductor manufacturing, chemical companies, petroleum refineries, heavy-duty trucking, and capital equipment are, to varying degrees, cyclical and have historically experienced periodic downturns. Prior downturns have been characterized by diminished product demand, excess manufacturing capacity and subsequent erosion of average selling prices in these markets resulting in negative effects on our net sales and results of operations. The wafer fab equipment for semiconductor manufacturing market, has historically been characterized by rapid changes in demand due to changes in electronics demand, economic conditions (both general and in the semiconductor and electronics industries), industry supply and demand, prices for semiconductors, and the ability of fabricators to manufacture increasingly complex and costly semiconductor devices. A prolonged and severe downward cycle in our markets, particularly in our semiconductor markets, could have a material adverse effect on our business, financial condition, results of operations and cash flows. In addition, in the past, we have experienced downturns in end-market demand due to uncertainty regarding the impact of tariffs or threatened tariffs and related trade tensions. The United States and other countries have imposed and may continue to impose new trade restrictions and export regulations, have levied tariffs and taxes on certain goods, and could significantly increase tariffs on a broad array of goods. These actions, or the threat of these actions in the United States or other jurisdictions material to our operations and end markets, could depress demand for our products or increase the cost to manufacture our products, which may affect the competitiveness of our products relative to manufacturers not affected by such actions, which could have a material adverse effect on our business, financial condition, results of operations and cash flows.

Previous wording

A majority of the revenues of our Advanced Surface Technologies segment are derived from manufacturing, cleaning, coating and refurbishing components used in advanced node semiconductor manufacturing equipment. Due to consolidation in the semiconductor manufacturing equipment industry, a small number of companies control a significant majority of the global production of semiconductor manufacturing equipment. As a result, the segment is dependent on certain key relationships with customers in that industry, including a customer that accounted for approximately 26% of our 2023 consolidated net sales, and the loss of the segment’s relationship with that customer or other key customers or other adverse changes in the segment’s relationships with those customers could have a material adverse effect on our business, financial condition, results of operations and cash flows. Consolidation among our customers, or a decision by any one or more of our customers to no longer outsource the type of solutions provided by our Advanced Surface Technologies segment, may further concentrate our business in a limited number of customers and expose us to increased risks relating to dependence on an even smaller number of customers.

Current wording

A majority of the revenues of our Advanced Surface Technologies segment are derived from manufacturing, cleaning, coating and refurbishing components used in advanced node semiconductor manufacturing equipment. Due to consolidation in the semiconductor manufacturing equipment industry, a small number of companies control a significant majority of the global production of semiconductor manufacturing equipment. As a result, the segment is dependent on certain key relationships with customers in that industry, including a customer that accounted for approximately 21% of our 2024 consolidated net sales. These sales were made by our Advanced Surface Technologies segment and the loss of the segment’s relationship with that customer or other key customers or other adverse changes in the segment’s relationships with those customers could have a material adverse effect on our business, financial condition, results of operations and cash flows. Consolidation among our customers, or a decision by any one or more of our customers to no longer outsource the type of solutions provided by our Advanced Surface Technologies segment, may further concentrate our business in a limited number of customers and expose us to increased risks relating to dependence on an even smaller number of customers.

Previous wording

We are dependent on the continued services of our leadership team. The loss of these personnel without adequate replacement could have a material adverse effect on our operations. Additionally, we need qualified managers and skilled employees with technical and industry experience in many locations in order to operate our business successfully. From time to time, there may be a shortage of skilled labor, which may make it more difficult and expensive for us to attract and retain qualified employees. If we were unable to attract and retain sufficient numbers of qualified individuals or our costs to do so were to increase significantly, our operations and results of operations could be materially adversely affected.

Current wording

We are dependent on the continued services of our leadership team and other key employees. The loss of these personnel without adequate replacement could have a material adverse effect on our operations. Additionally, we need qualified managers and skilled employees with technical and industry experience in many locations in order to operate our business successfully. From time to time, there may be a shortage of skilled labor, which may make it more difficult and expensive for us to attract and retain qualified employees. If we were unable to attract and retain sufficient numbers of qualified individuals or our costs to do so were to increase significantly, our operations and results of operations could be materially adversely affected.

Previous wording

We have seen organic changes related to price increases of raw materials over the past several years. The prices of some of our raw materials may continue to increase due to supply chain limitations or the imposition (or announcement of the intended imposition) of new or increased tariffs or changes in trade laws. While we have been successful in passing along some of these higher costs, there can be no assurance we will be able to continue doing so without losing customers. Similarly, the loss of a key supplier, the unavailability of a key raw material, or other disruptions of our supply chain could adversely affect our business, financial condition, results of operations and cash flows. In addition, we have limited sources for certain key raw materials and other supplies.

Current wording

We have seen organic changes related to price increases of raw materials over the past several years. The prices of some of our raw materials may continue to increase due to supply chain limitations or the imposition (or announcement of the intended imposition) of new or increased tariffs or changes in trade laws, including tariffs imposed in response to the tariffs announced by the U.S. government in January 2025 with respect to goods sources in China, Mexico, and Canada. While we have been successful in passing along some of these higher costs, there can be no assurance we will be able to continue doing so without losing customers. Similarly, the loss of a key supplier, the unavailability of a key raw material, or other disruptions of our supply chain could adversely affect our business, financial condition, results of operations and cash flows. In addition, we have limited sources for certain key raw materials and other supplies.

Previous wording

We endeavor to identify and obtain in established markets insurance agreements to cover certain significant risks and liabilities, though insurance against some of the risks inherent in our operations (such as insurance covering down-stream customer product recalls) is either unavailable or available only at rates or on terms that we consider excessive. Depending on competitive conditions and other factors, we endeavor to obtain contractual protection against uninsured risks from our customers, including limitations on liability and indemnification. In some cases, we are unable to obtain such contractual protections, and when we do, such contractual protection may not be as broad as we desire, may not be supported by adequate insurance maintained by the customer, or may not be fully enforceable in the jurisdictions in which our customers are located. Such insurance or contractual protection may not be sufficient or effective under all circumstances or against all hazards to which we may be subject. A successful claim or product recall for which we are not insured or for which we are underinsured could have a material adverse effect on us. Additionally, disputes with insurance carriers over coverage may affect the timing of cash flows and, if litigation with the carrier becomes necessary, an outcome unfavorable to us may have a material adverse effect on our results of operations.

Current wording

Our products and solutions are often used in critical applications in demanding environments, including in the nuclear, oil and gas, automotive, aerospace and pharmaceutical industries. Accordingly, product and service failures can have significant consequences and could result in significant product liability, warranty and other claims against us, regardless of whether our products and services caused the incident that is the subject of the claim, and we may have obligations to participate in the recall of products in which our products are components, if any of the components or services we supply prove to be defective. We endeavor to identify and obtain in established markets insurance agreements to cover certain significant risks and liabilities, though insurance against some of the risks inherent in our operations (such as insurance covering down-stream customer product recalls) is either unavailable or available only at rates or on terms that we consider excessive. Depending on competitive conditions and other factors, we endeavor to obtain contractual protection against uninsured risks from our customers, including limitations on liability and indemnification. In some cases, we are unable to obtain such contractual protections, and when we do, such contractual protection may not be as broad as we desire, may not be supported by adequate insurance maintained by the customer, or may not be fully enforceable in the jurisdictions in which our customers are located. Such insurance or contractual protection may not be sufficient or effective under all circumstances or against all hazards to which we may be subject. A successful claim or product recall for which we are not insured or for which we are underinsured could have a material adverse effect on us. Additionally, disputes with insurance carriers over coverage may affect the timing of cash flows and, if litigation with the carrier becomes necessary, an outcome unfavorable to us may have a material adverse effect on our results of operations.

Previous wording

Our business may be impacted by information technology disruptions, including information technology attacks. Cybersecurity attacks, in particular, are evolving and include, but are not limited to, malicious software, attempts to gain unauthorized access to data or corporate funds, and other electronic security breaches that could lead to disruptions in systems, unauthorized release of confidential or otherwise protected information and corruption of data (our own or that of third parties). We have experienced cybersecurity attacks and, while we believe that we have adopted appropriate measures and procedures to mitigate potential risks to our systems from information technology-related disruptions, it is possible that a cybersecurity attack could be successful in breaching the measures and procedures designed to protect our systems. In such an event, we could potentially be subject to production downtimes, operational delays, other detrimental impacts on our operations or ability to provide products and services to our customers, the compromising of confidential or otherwise protected information, misappropriation, destruction or corruption of data, security breaches, misappropriation of corporate funds, other manipulation or improper use of our systems or networks, financial losses from remedial actions, loss of business or potential liability, and/or damage to our reputation, any of which could have a material adverse effect on our business, financial condition, results of operations and cash flows.

Current wording

Our business may be impacted by information technology disruptions, including information technology attacks. Cybersecurity attacks, in particular, are evolving and include, but are not limited to, malicious software, attempts to gain unauthorized access to data or corporate funds, and other electronic security breaches that could lead to disruptions in systems, unauthorized release of confidential or otherwise protected information and corruption of data (our own or that of third parties). We have experienced cybersecurity attacks and, while we believe that we have adopted appropriate measures and procedures to mitigate potential risks to our systems from information technology-related disruptions, it is possible that a cybersecurity attack could be successful in breaching the measures and procedures designed to protect our systems, including due to the development, through the application of artificial intelligence, of more advanced cybersecurity attacks. In such an event, we could potentially be subject to production downtimes, operational delays, other detrimental impacts on our operations or ability to provide products and services to our customers, the compromising of confidential or otherwise protected information, misappropriation, destruction or corruption of data, security breaches, misappropriation of corporate funds, other manipulation or improper use of our systems or networks, financial losses from remedial actions, loss of business or potential liability, and/or damage to our reputation, any of which could have a material adverse effect on our business, financial condition, results of operations and cash flows.

Previous wording

Because we sell our products and provide services in a number of foreign countries, we are subject to risks associated with doing business internationally. In 2023, we derived approximately 40% of our net sales from sales of our products and solutions outside of the U.S. Outside the U.S., we operate 6 primary manufacturing and service facilities (approximately 50,000 square feet or larger) located in 5 countries. Our sales and operating activities outside of the U.S. are, and will continue to be, subject to a number of risks, including:

Current wording

Because we sell our products and provide services in a number of foreign countries, we are subject to risks associated with doing business internationally. In 2024, we derived approximately 43% of our net sales from sales of our products and solutions outside of the U.S. Outside the U.S., we operate 8 primary manufacturing and service facilities (approximately 50,000 square feet or larger) located in 7 countries. Our sales and operating activities outside of the U.S. are, and will continue to be, subject to a number of risks, including:

Previous wording

•political and economic instability, including any conflict or threat of conflict that may affect Taiwan;

Current wording

•political and economic instability, including any conflict, threat of conflict or other external destabilizing activities that may affect Taiwan;

Previous wording

•increases in costs due to equipment or labor issues;

Current wording

•increases in costs or operating disruptions due to equipment or labor issues;