PureCycle Technologies Inc

Previous wording

PureCycle Technologies, Inc. (“PCT” or “Company”) is a Florida-based corporation focused on commercializing a patented purification recycling technology (the “Technology”), originally developed by The Procter & Gamble Company (“P&G”), for restoring waste polypropylene into resin, called ultra-pure recycled (“UPR”) resin, which has nearly identical properties and applicability for reuse as virgin polypropylene. PCT has a global license for the Technology from P&G. PCT’s goal is to create an important new segment of the global polypropylene market that will assist multinational entities in meeting their sustainability goals, providing consumers with polypropylene-based products that are sustainable, and reducing overall polypropylene waste in the world’s landfills and oceans.

Current wording

PureCycle Technologies, Inc. (“PCT” or “Company”) is a Florida-based corporation focused on commercializing a patented dissolution recycling technology to physically separate the polymer from other plastics, color, and contaminants (the “Technology”), originally developed by The Procter & Gamble Company (“P&G”), for restoring waste polypropylene into resin, called PureFive™ resin, which has similar properties and applicability for reuse as virgin polypropylene. PCT has a global license for the Technology from P&G. In April 2023, we certified the Ironton Facility as mechanically complete. We expect to have capacity of approximately 107 million pounds per year when fully operational. Commissioning activities are ongoing, but the plant is not yet operating at the expected full capacity. PCT’s goal is to create an important new segment of the global polypropylene market that will assist multinational entities in meeting their sustainability goals, providing consumers with polypropylene-based products that are sustainable, and reducing overall polypropylene waste in the world’s landfills and oceans.

Previous wording

PCT’s process includes two steps: Feed Pre-Processing (“Feed PreP”) and the use of PCT’s recycling technology for purification. The Feed PreP step will collect, sort, and prepare polypropylene waste (“feedstock”) for purification. The purification step is a purification recycling process that uses a combination of solvent, temperature, and pressure to return the feedstock to near-virgin condition through a novel configuration of commercially available equipment and unit operations. The purification process puts the plastic through a physical extraction process using super critical fluids that both extract and filter out contaminants and purify the color, opacity, and odor of the plastic without changing the bonds of the polymer. By not altering the chemical makeup of the polymer, the Company is able to use significantly less energy and reduce production costs as compared to virgin resin.

Current wording

Purification is a dissolution recycling process that uses a combination of solvent, temperature, and pressure to return the feedstock to near-virgin condition through a novel configuration of commercially available equipment and unit operations. The purification process puts the plastic through a physical extraction process using supercritical fluids that both extract and filter out other plastics and additives to purify the color, opacity, and odor of the plastic without changing the bonds of the polymer. By not altering the chemical makeup of the polymer, the Company is able to use significantly less energy and reduce production costs as compared to virgin resin.

Previous wording

In July 2021, PCT reached an agreement with The Augusta Economic Development Authority (“AEDA”) to build its first U.S. facility with multiple lines for both Feed PreP and purification (“multi-line facility”) in Augusta, Georgia (the “Augusta Facility”). PCT expects the approximately 200-acre location to eventually include up to eight production lines, which are expected to collectively have UPR resin production capacity of approximately 1 billion pounds per year. When fully operational, each purification line at the Augusta Facility is expected to have annual production capacity of approximately 130 million pounds of PCT’s UPR resin. PureCycle has allocated 40% of the Augusta Facility output, for Lines 1 and 2, to existing customers and expects that additional offtake agreements will continue to be negotiated.

Current wording

In July 2021, PCT reached an agreement with the Augusta Economic Development Authority (“AEDA”) to build its first U.S. facility with multiple lines for both Feed PreP and purification (“multi-line facility”) in Augusta, Georgia (the “Augusta Facility”). PCT expects the approximately 200-acre location to eventually include up to eight production lines, which are expected to collectively have PureFive™ resin production capacity of approximately 1 billion pounds per year. When fully operational, each purification line at the Augusta Facility is expected to have annual production capacity of approximately 130 million pounds of PCT’s PureFive™ resin. PureCycle has allocated 40% of the Augusta Facility output for Lines 1 and 2 to existing customers and expects that additional offtake agreements will continue to be negotiated.

Previous wording

On June 30, 2023, PCT and the AEDA executed an Economic Development Agreement (“EDA”) related to the Company’s plans to construct the Augusta Facility. Pursuant to the EDA, PCT expects to receive certain property tax abatement benefits as well as certain other incentives, including site infrastructure development assistance (“Incentive Benefits”). In order to receive the Incentive Benefits under Phase One (as defined below) of the Augusta Project, PCT will be obligated to create 82 full-time jobs with investments of at least $440 million no later than December 31, 2026. Through December 31, 2023, PCT has invested approximately $84.9 million for pre-construction engineering and long-lead equipment for the benefit of Phase One investments. If PCT elects to activate the second phase of the Augusta Project, PCT will be required to create an additional 25 full-time jobs and investments of $295 million no later than December 31, 2028. To the extent PCT fails to achieve an average of 80% of the jobs and investment commitments in any year over the 20-years of each phase, PCT will be required to make a repayment to the AEDA of a pro rata portion of the total value of the Incentive Benefits received by PCT in such year.

Current wording

On June 30, 2023, PCT and the AEDA executed an Economic Development Agreement (“EDA”) related to the Company’s plans to construct the Augusta Facility. Pursuant to the AEDA, PCT expects to receive certain property tax abatement benefits as well as certain other incentives, including site infrastructure development assistance (“Incentive Benefits”). In order to receive the Incentive Benefits under Phase One (as defined below) of the Augusta Project, PCT will be obligated to create 82 full-time jobs with investments of at least $440 million no later than December 31, 2026. Through December 31, 2024, PCT has invested approximately $114.0 million for pre-construction engineering and long-lead equipment for the benefit of Phase One investments. If PCT elects to activate the second phase of the Augusta Project, PCT will be required to create an additional 25 full-time jobs and investments of $295 million no later than December 31, 2028. To the extent PCT fails to achieve an average of 80% of the jobs and investment commitments in any year over the 20-years of each phase, PCT will be required to make a repayment to the AEDA of a pro rata portion of the total value of the Incentive Benefits received by PCT in such year.

Previous wording

Also on June 30, 2023, PCT entered into a series of agreements with the AEDA to construct phase one (“Phase One”) of the Augusta Facility. PCT is leasing 150 acres of land (“Real Property”) owned by the AEDA and will construct buildings, building equipment, and other structures (the “Improvements”) on the land. PCT will also acquire and install the necessary processing, warehousing, and other equipment, as well as conveyors and pipelines (the “Equipment”, together with the Real Property and the Improvements, the “Augusta Project”). The Improvements and Equipment will be transferred to the AEDA and leased back by PCT. As noted above, PCT anticipates that the first portion of Phase One, will consist of one purification line and construction commenced prior to the end of 2023. Also as noted above, construction of the first purification line must be completed by December 31, 2026.

Current wording

Also on June 30, 2023, PCT entered into a series of agreements with the AEDA to construct phase one (“Phase One”) of the Augusta Facility. PCT is leasing 150 acres of land (“Real Property”) owned by the AEDA and will construct buildings, building equipment, and other structures (the “Improvements”) on the land. PCT will also acquire and install the necessary processing, warehousing, and other equipment, as well as conveyors and pipelines (the “Equipment”, together with the Real Property and the Improvements, the “Augusta Project”). The Improvements and Equipment will be transferred to the AEDA and leased back by PCT. As noted above, PCT anticipates that the first portion of Phase One will consist of one purification line. Also as noted above, construction of the first purification line must be completed by December 31, 2026.

Previous wording

At the end of 2023, the Company commenced site preparation activities, including debris removal and site stabilization activities, and continued with payments to vendors for certain long lead-time equipment. Pursuant to the EDA, PCT must also show continuous construction progress, with regard to the first purification line under the first phase of the Augusta Project during 2024 or risk losing certain future Incentive Benefits. Market conditions remain challenging and have created uncertainty as to the timing or likelihood of success of the currently anticipated project financing for the Augusta Facility. As a result, PCT is currently pursuing various structures for project financing of the Augusta Facility. While PCT remains confident in its ability to finance the Augusta Facility, it is limiting its expenses and adjusting its timeline in light of this uncertainty. If PCT is unable to raise additional debt or equity, when desired, or on terms favorable to PCT, PCT’s business, financial condition, and results of operations would be adversely affected.

Current wording

In November 2024, the Company commenced early works construction activities including site clearing and grading. When early works are successfully completed, expected next steps should include underground utility installation, piling, and foundations. Pursuant to the EDA, PCT must continue construction progress on the first purification line under the first phase of the Augusta Project during 2025 or risk losing certain future Incentive Benefits. While the Company believes it has satisfied the contractual obligations regarding financing and construction of Phase One to date, the AEDA believes that it could seek to terminate the lease if PCT does not demonstrate further progress on Phase One. Market conditions remain challenging and have created uncertainty as to the timing or likelihood of success of the currently anticipated project financing for the Augusta Facility. As a result, PCT is currently pursuing various structures for project financing of the Augusta Facility. While PCT remains confident in its ability to finance the Augusta Facility, it is limiting its expenses and adjusting its timeline in light of this uncertainty. If PCT is unable to raise additional debt or equity, when desired, or on terms favorable to PCT, PCT’s business, financial condition, and results of operations would be adversely affected.

Previous wording

PCT sees a robust pipeline of demand for its recycled polypropylene and PCT is seeing market acceptance of its “Feedstock+” pricing model for its UPR resin. The “Feedstock+” pricing model divides the market cost of feedstock by a set yield-loss and adds a fixed price, which effectively passes on the cost of feedstock and de-risks PCT’s operating margin volatility.

Current wording

PCT sees a robust pipeline of demand for its recycled polypropylene and PCT is seeing market acceptance of its “Feedstock+” pricing model for its PureFive™ resin. The Feedstock+ pricing model divides the market cost of feedstock by a set yield-loss and adds a fixed price, which effectively passes on the cost of feedstock and de-risks PCT’s operating margin volatility.

Previous wording

For the Ironton Facility, PCT’s feedstock price was linked, in part, to changes in the Chemical Market Analysis, the index for virgin polypropylene, in a price schedule that contained a fixed, collared price around an index price range, which was further adjusted based on the percentage of polypropylene in the feedstock supplied. For the Augusta Facility and future purification facilities, PCT plans to link the feedstock price, in part, to the price of a no. 5 plastic bale of polypropylene as reported by recyclingmarkets.net (“Feedstock Market Pricing”). PCT will procure both feedstock in line with Feedstock Market Pricing as well as low value feedstocks that can be processed by PCT, below Feedstock Market Pricing for the Augusta Facility.

Current wording

For the Ironton Facility, PCT’s feedstock price was linked, in part, to changes in the Chemical Market Analysis, the index for virgin polypropylene, a price schedule that contained a fixed, collared price around an index price range, which was further adjusted based on the percentage of polypropylene in the feedstock supplied. For the Augusta Facility and future purification facilities, PCT plans to link the feedstock price, in part, to the price of a #5 plastic bale of polypropylene as reported by recyclingmarkets.net (“Feedstock Market Pricing”). PCT will procure both feedstock in line with Feedstock Market Pricing as well as low value feedstocks that can be processed by PCT, below Feedstock Market Pricing for the Augusta Facility.

Previous wording

In conjunction with the Augusta Facility, PCT also plans to build and operate Feed PreP facilities in locations geographically near the feed sources to optimize PCT’s supply chain economics. During the third quarter of 2022, PCT experienced challenges obtaining the necessary water and sewer permits to construct its first planned Feed PreP facility in Central Florida. PCT is evaluating its available recourses to obtain these permits, as well as potential legal remedies with regard to its obligations for the remaining 8 years of its 11-year lease agreement for the Central Florida facility. PCT is also evaluating alternative preprocessing sites in other locations. Also, on August 24, 2022, PCT signed a lease for a future PreP facility in Denver, Pennsylvania, which is expected to be operationally ready in late 2024, provided we obtain the financing necessary for operational readiness. Throughout the second half of 2021, PCT developed a feedstock processing system with advanced sorting capabilities that can handle various types of plastics in addition to polypropylene (designated as no. 5 plastic). PCT’s enhanced sorting should allow PCT to process plastic bales between no. 1 and no. 7. PCT’s new Feed PreP facilities will extract polypropylene and ship it to PCT’s purification lines, while the non-polypropylene feed will be sorted, baled, and subsequently sold on the open market.

Current wording

PCT has installed a feedstock processing system with advanced sorting capabilities that can handle various types of plastics in addition to polypropylene (designated as #5 plastic). PCT’s enhanced sorting should allow PCT to process plastic bales between #1 and #7. PCT’s Feed PreP facilities extract polypropylene used in PCT’s purification process, while the non-polypropylene feed will be sorted, baled, and subsequently sold on the open market.

Previous wording

On September 10, 2021, PCT filed for a U.S. Food and Drug Administration (“FDA”) Letter of No Objection (“LNO”), for Conditions of Use A – H. Conditions of Use describe the temperature and duration at which a material should be tested to simulate the way the material is intended to be used. Conditions of Use C – H address many consumer product packaging requirements, including applications for hot filled and pasteurized, as well as room temperature, refrigerated and frozen applications. Generally speaking, Conditions of Use A and B relate to extreme temperature applications. The LNO submission also defines the feedstock sources for the Company’s planned commercial recycling process, and this LNO submission pertained to (i) food grade post-industrial recycled feedstocks and (ii) food grade curbside post-consumer recycled feedstocks.

Current wording

On September 10, 2021, PCT filed for a FDA LNO for Conditions of Use A – H. Conditions of Use describe the temperature and duration at which a material should be tested to simulate the way the material is intended to be used. Conditions of Use C – H address many consumer product packaging requirements, including applications for hot filled and pasteurized, as well as room temperature, refrigerated and frozen applications. Generally speaking, Conditions of Use A and B relate to extreme temperature applications. The LNO submission also defines the feedstock sources for the Company’s planned commercial recycling process, and this LNO submission pertained to (i) food grade post-industrial recycled feedstocks and (ii) food grade curbside post-consumer recycled feedstocks.

Previous wording

On January 17, 2023, the Company announced its first European purification facility will be in Antwerp, Belgium. On October 20, 2022, the Company executed a Joint Venture Agreement with SK geo centric Co., Ltd., to develop a UPR purification facility in Ulsan, South Korea. The parties will each hold an equal stake in the joint venture with completion of construction activities, pending necessary financing. The Company is also planning to expand its production capabilities into Asia through negotiation of joint ventures with Mitsui & Co. Ltd. in Japan for in-country production and sales. Future expansion is dependent on successful completion of project financing.

Current wording

On January 17, 2023, the Company announced its first European purification facility is planned to be in Antwerp, Belgium. The Company is also planning to expand its production capabilities into Asia through negotiation of joint ventures with Mitsui & Co. Ltd. in Japan for in-country production and sales. Future expansion is dependent on successful completion of project financing.

Previous wording

PCT generated an immaterial amount of revenue late in 2023 but has not yet reached significant continuous (i) operational volumes at the Ironton Facility or (ii) significant revenue generation. The Ironton Facility is expected to be fully operational later in 2024.

Current wording

PCT generated an immaterial amount of revenue during 2024 but has not yet reached significant continuous operational volumes at the Ironton Facility or significant revenue generation.

Previous wording

Selling, general and administrative expenses consist primarily of personnel-related expenses for our corporate, executive, finance and other administrative functions and professional services, including legal, audit and accounting services. We expect our selling, general, and administrative expenses to increase for the foreseeable future as we scale headcount with the growth of our business, and as a result of operating as a public company, including compliance with the rules and regulations of the SEC, legal, audit, additional insurance expenses, investor relations activities, and other administrative and professional services.

Current wording

Selling, general and administrative expenses consist primarily of personnel-related expenses for our corporate, executive, finance and other administrative functions and professional services, including legal, audit and accounting services. As our business grows, our selling, general, and administrative expenses may increase, and they may also increase as a result of operating as a public company, including compliance with the rules and regulations of the SEC, legal, audit, additional insurance expenses, investor relations activities, and other administrative and professional services.

Previous wording

The increase was attributable to higher depreciation expense related to assets supporting operations of $11.5 million due primarily to placing the Ironton Facility assets in service in the second quarter of 2023, increased operational site costs of $8.0 million related to commissioning and operating the Ironton Facility, higher employee costs of $5.5 million due primarily to increased headcount at the Ironton Facility, higher rent for operating facilities of $2.6 million, $0.5 million related to increased operational consulting due primarily to on-site third party assistance for Ironton Facility mechanical completion and commissioning activities, and $0.6 million of other net increases.

Current wording

The increase was attributable to higher depreciation expense related to assets supporting operations of $15.6 million due primarily to a full year of depreciation in 2024 after placing the Ironton Facility assets into service in the second quarter of 2023; increased operational site costs of $12.8 million related operating the Ironton Facility for a full year in 2024; increased employee costs of $2.3 million, increased rent for operating facilities of

Previous wording

The increase in research and development expenses was primarily due to $1.1 million increased employee costs related to higher headcount of employees aligned to research and development activities, $0.5 million increase in depreciation related to assets supporting research and development, and $0.6 million increase in operational site costs related to facilities used in research and development.

Current wording

The decrease in research and development expenses was primarily due to $0.3 million decreased research and development activities, $0.2 million decrease in operational site costs related to facilities used in research and development, partially offset by $0.2 million increase in rent and $0.1 million increase in employee costs related to higher headcount of employees aligned to research and development activities.

Previous wording

The increase was attributable to additional financing incurred in the second and third quarters of 2023, including closing of $250.0 million of green convertible senior notes in August 2023, as well as ceasing capitalization of interest on the Revenue Bonds beginning in June 2023 as the plant is now in service.

Current wording

The increase was attributable to additional financing incurred in the second and third quarters of 2023 and full year interest expense in 2024 related to these borrowings, including the closing of $250.0 million of green convertible senior notes in August 2023, as well as ceasing capitalization of interest on the Revenue Bonds beginning in June 2023 as the plant is now in service.

Previous wording

The increased benefit was attributable to the change in fair value of the Company’s liability-classified warrants, of which the primary drivers of the change in valuation related to changes in the underlying price of PCT’s common stock, as well as fluctuations in volatility and reduction in the warrant terms with the passage of time.

Current wording

The increased expense was attributable to the change in fair value of the Company’s liability-classified warrants, of which the primary drivers of the change in valuation related to changes in the underlying price of PCT’s common stock, as well as an increase in the number of warrants in 2024.

Previous wording

Refer to Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations” section contained in our Annual Report on Form 10-K for the fiscal year ended December 31, 2022 for the results of operations discussion for the fiscal year ended December 31, 2022 compared to the fiscal year ended December 31, 2021. This comparison was immaterially impacted by certain reclassificationsto conform with the report classifications for these prior periods.

Current wording

Refer to Item 7. “Management’s Discussion and Analysis of Financial Condition and Results of Operations” section contained in our Annual Report on Form 10-K for the fiscal year ended December 31, 2023 for the results of operations discussion for the fiscal year ended December 31, 2023 compared to the fiscal year ended

Previous wording

As of December 31, 2023, PCT had $121.6 million of Available Unrestricted Liquidity and had Restricted Cash of $229.1 million. On March 15, 2023, PCT entered into a $150.0 million revolving credit facility with Sylebra Capital (the “Revolving Credit Facility”). Borrowings under the Revolving Credit Agreement may be used for working capital, capital expenditures and other general corporate purposes. There are currently no borrowings under the Revolving Credit Facility.

Current wording

As of December 31, 2024, PCT had $15.7 million of Unrestricted Liquidity, and had Restricted Cash of $25.8 million. PCT also has a $200.0 million revolving credit facility with Sylebra Capital (the “Revolving Credit Facility”) that is currently unused and expires on March 31, 2026. Any future borrowings under the Revolving Credit Facility would accrue interest at 17.50%.

Previous wording

PCT believes that its current level of Unrestricted Available Liquidity is not sufficient to fund operations, outstanding commitments, and further its future growth plans. The conditions described above raise substantial doubt regarding PCT’s ability to continue as a going concern for a period of at least one year from the date of issuance of the consolidated financial statements included in this Annual Report on Form 10-K.

Current wording

PCT believes that its current level of unrestricted liquidity is not sufficient to fund operations, outstanding commitments, and further its future growth plans. The conditions described above raise substantial doubt regarding PCT’s ability to continue as a going concern for a period of at least one year from the date of issuance of the consolidated financial statements included in this Annual Report on Form 10-K.

Previous wording

In an effort to alleviate these conditions, PCT entered into two agreements. On March 5, 2024, a subsidiary of the Company Purchased 99% of the outstanding Revenue Bonds pursuant to the Purchase Agreement (as defined below). In connection with the Purchase, the Indenture was amended and supplemented and substantially all covenants and Events of Default contained in the Indenture, the Loan Agreement and certain of such other Financing Documents were eliminated. See “Management’s Discussion and Analysis of Financial Condition and Results of Operations – Liquidity and Capital Resources – Indebtedness – Revenue Bonds” for more information. The Purchase reduced unrestricted liquidity by $74.5 million and restricted liquidity by $184.6 million. Also, on March 1, 2024, PCT increased the Revolving Credit Facility from $150.0 million to $200.0 million, extended the maturity date to September 30, 2025, and obtained a carveout to permit the Company to purchase the Revenue Bonds, pursuant to an amendment to the Credit Agreement with the Company (the “Borrower”), PureCycle Technologies Holdings Corp. and PureCycle Technologies, LLC (the “Guarantors”), Sylebra Capital Partners Master Fund, LTD, Sylebra Capital Parc Master Fund, and Sylebra Capital Menlo Master Fund (collectively, the “Lenders”), and Madison Pacific Trust Limited (the “Administrative Agent” and “Security Agent”). Borrowings under the Revolving Credit Agreement may be used for working capital, capital expenditures and other general corporate purposes – see Note 3 (“Notes Payable and Debt Instruments”) to the Notes to the Consolidated Financial Statements appearing elsewhere in this Annual Report on Form 10-K for additional information. Further, PCT intends to and has the ability to re-market some or all of the Purchased Revenue Bonds based on the need for additional liquidity. The re-marketing process may require the addition of certain covenants to enhance the marketability of the Purchased Revenue Bonds. The ability to re-market the Purchased Revenue Bonds with any such additional new covenants would require a further amendment to, or waiver of, provisions included within the Revolving Credit Facility and Term Loan Credit Agreement. After considering management’s plans to mitigate these conditions, including adjustment of expenditure timing and execution of the amendment to the Sylebra Revolving Credit Facility, PCT believes this substantial doubt has been alleviated and it has sufficient liquidity to continue as a going concern for the next twelve months.

Current wording

Further, on March 5, 2024, PureCycle Technologies LLC ("PCT LLC") purchased 99% of the outstanding Revenue Bonds (as defined below). Since the purchase of the outstanding Bonds, PCT has, through a series of transactions described below, resold $116.8 million of Bonds at a purchase price of $800 per $1,000 principal amount. As of December 31, 2024, there were $117.6 million of outstanding Bonds that PCT intends to, and has the ability to, re-market based on the need for additional liquidity. The re-marketing process may require the addition of certain covenants to enhance the marketability of the purchased Bonds. The ability to re-market the purchased Bonds with any such additional new covenants would require a further amendment to, or waiver of, provisions included within the Revolving Credit Facility. Any borrowings under the Revolving Credit Facility would accrue interest at 17.50%.

Previous wording

PCT’s future capital requirements will depend on many factors, including the funding mechanism and construction schedule of the Augusta Facility and other anticipated facilities outside the United States, build-out of multiple Feed PreP facilities, funding needs to support other business opportunities, funding for general corporate purposes, and other challenges or unforeseen circumstances. As a low-revenue operating company, PCT continually reviews its cash outlays, pace of hiring, professional services and other spend, and capital commitments to proactively manage those needs in tandem with our Available Unrestricted Liquidity balance. For future growth and investment, PCT expects to seek additional debt or equity financing from outside sources, which it may not be able to raise on terms favorable to PCT, or at all. If PCT is unable to raise additional debt or sell additional equity when desired, or if PCT is unable to manage its cash outflows, PCT’s business, financial condition, and results of operations would be adversely affected. In addition, any financing arrangement may have potentially adverse effects on PCT and/or its stockholders. Debt financing (if available and undertaken) will increase expenses, must be repaid regardless of operating results and may involve restrictions limiting PCT’s operating flexibility. If PCT consummates an equity financing to raise additional funds, the percentage ownership of its existing stockholders will be reduced, and the new equity securities may have rights, preferences or privileges senior to those of the current holders of PCT’s common stock.

Current wording

PCT’s future capital requirements will depend on many factors, including the funding mechanism and construction schedule of the Augusta Facility and other anticipated facilities outside the United States, build-out of additional Feed PreP facilities, funding needs to support other business opportunities, funding for general corporate purposes, debt service, and other challenges or unforeseen circumstances. PCT continually reviews its cash outlays, pace of hiring, professional services and other expenses, and capital commitments to proactively manage those needs in tandem with our available unrestricted cash balance. For future growth and investment, PCT expects to seek additional debt or equity financing from outside sources, which it may not be able to raise on terms favorable to PCT, or at all. If PCT is unable to raise additional debt or sell additional equity when desired, or if PCT is unable to manage its cash outflows, PCT’s business, financial condition, and results of operations would be adversely affected. In addition, any financing arrangement may have potentially adverse effects on PCT and/or its stockholders. Debt financing (if available and undertaken) will increase expenses, must be repaid regardless of operating results and may involve restrictions limiting PCT’s operating flexibility. If PCT consummates an equity financing to raise additional funds, the percentage ownership of its existing stockholders will be reduced, and the new equity securities may have rights, preferences or privileges senior to those of the current holders of PCT’s Common Stock.

Previous wording

The $116.3 million decrease in net cash used in investing activities for the year ending December 31, 2023 compared to the same period in 2022 was attributable to $134.8 million lower investment purchases and $133.3 million lower capital expenditure payments, offset by $151.8 million of lower maturities and sales of investments.

Current wording

The $95.1 million decrease in net cash used in investing activities for the year ending December 31, 2024 compared to the same period in 2023 was attributable to $27.0 million lower held for sale investment purchases and $98.3 million lower capital expenditure payments, partially offset by $30.2 million of higher maturities and sales of investments.

Previous wording

On October 7, 2020, the Southern Ohio Port Authority (“SOPA”) issued certain revenue bonds (“Revenue Bonds”) pursuant to an Indenture of Trust dated as of October 1, 2020 (as amended, restated, supplemented or otherwise modified from time to time, the “Indenture”), between SOPA and UMB Bank, N.A., as Trustee (“Trustee”), and loaned the proceeds from their sale to PureCycle: Ohio LLC (“PCO”), an Ohio limited liability company and indirect wholly-owned subsidiary of PCT, pursuant to a Loan Agreement dated as of October 1, 2020, between SOPA and PCO (as amended, restated, supplemented or otherwise modified from time to time, the “Loan Agreement”), to be used to (i) acquire, construct and equip the Ironton Facility (referred to within the Loan Agreement as the “Ohio Phase II Facility” and, together with the FEU (referred to within the Loan Agreement as the “Phase I Facility”), the “Project”); (ii) fund a debt service reserve fund for the Series 2020A Bonds; (iii) finance capitalized interest; and (iv) pay the costs of issuing the Revenue Bonds. The Revenue Bonds were offered in three series, including (i) Exempt Facility Revenue Bonds (PureCycle Project), Tax-Exempt Series 2020A (“Series 2020A Bonds”); (ii) Subordinate Exempt Facility Revenue Bonds (PureCycle Project), Tax-Exempt Series 2020B (“Series 2020B Bonds”); and (iii) Subordinated Exempt Facility Revenue Bonds (PureCycle Project), Taxable Series 2020C (“Series 2020C Bonds”).

Current wording

On October 7, 2020, the Southern Ohio Port Authority (“SOPA”) issued certain revenue bonds (“Revenue Bonds”) pursuant to an Indenture of Trust dated as of October 1, 2020 (as amended, restated, supplemented or otherwise modified from time to time, the “Indenture”), between SOPA and UMB Bank, N.A., as Trustee (“Trustee”), and loaned the proceeds from their sale to PureCycle: Ohio LLC (“PCO”), an Ohio limited liability company and indirect wholly-owned subsidiary of PCT, pursuant to a Loan Agreement dated as of October 1, 2020, between SOPA and PCO (as amended, restated, supplemented or otherwise modified from time to time, the “Loan Agreement”), to be used to, among other things, acquire, construct and equip the Ironton Facility; fund a debt service reserve fund for the Series 2020A Bonds; finance capitalized interest; and pay the costs of issuing the Revenue Bonds.

Previous wording

•amendments extending the Outside Completion Date to December 31, 2030;

Current wording

amending the definition of “Outside Completion Date” to mean December 31, 2026;

Previous wording

On March 15, 2023, PCT entered into a $150 million revolving credit facility (the “Revolving Credit Facility”) pursuant to a Credit Agreement (the “Revolving Credit Agreement”) dated as of March 15, 2023, with PureCycle Technologies Holdings Corp. and PureCycle Technologies, LLC (the “Guarantors”), Sylebra Capital Partners Master Fund, LTD, Sylebra Capital Parc Master Fund, and Sylebra Capital Menlo Master Fund (collectively, the “Lenders”), and Madison Pacific Trust Limited (the “Administrative Agent” and “Security Agent”), which had an original maturity on June 30, 2024 and was subsequently extended. The Lenders and their affiliates are greater than 5% beneficial owners of PCT.

Current wording

On March 15, 2023, PCT entered into a $150 million revolving credit facility (the “Revolving Credit Facility”) pursuant to a Credit Agreement (as amended from time to time, the “Revolving Credit Agreement”) dated as of March 15, 2023, with PureCycle Technologies Holdings Corp. and PCT, LLC (the “Guarantors”), Sylebra Capital Partners Master Fund, LTD, Sylebra Capital Parc Master Fund, and Sylebra Capital Menlo Master Fund (collectively, the “Lenders”), and Madison Pacific Trust Limited (the “Administrative Agent” and “Security Agent”). The Lenders and their affiliates are greater than 5% beneficial owners of PCT.

Previous wording

On August 4, 2023, the Company entered into the Second Amendment to Credit Agreement, by and among the Company, as borrower, PureCycle Technologies, LLC and PureCycle Technologies Holdings Corp., as Guarantors, the lenders party thereto, and Madison Pacific Trust Limited, as administrative agent and as security agent (the “Second Amendment”), in connection with the Company’s $150 million Revolving Credit

Current wording

On August 4, 2023, the Company entered into the Second Amendment to Credit Agreement, by and among the Company, as borrower, PureCycle Technologies, LLC and PureCycle Technologies Holdings Corp., as Guarantors, the lenders party thereto, and Madison Pacific Trust Limited, as administrative agent and as security agent (the “Second Amendment”), in connection with the Company’s $150 million Revolving Credit Facility governed by the Revolving Credit Agreement, to extend the maturity date of the Revolving Credit Facility to March 31, 2025.

Previous wording

There were no funds drawn on the Revolving Credit Facility as of December 31, 2023. The up-front commitment fee and other related fees of $2.1 million are being amortized over the term of the contract. During 2023 there were $1.2 million and $0.9 million recorded in prepaid expenses and other current assets during March and September 2023, respectively.

Current wording

There were no funds drawn on the Revolving Credit Facility as of December 31, 2024. The up-front commitment fee and other related fees of $3.8 million are being amortized over the term of the contract.

Previous wording

In connection with the above, CSC has funded $19.8 million for purposes of procuring equipment from a Vendor, which had previously been ordered by the Company prior to entering into these agreements with CSC. CSC will lease this equipment back to the Company under a 36 month lease, which will commence when 1) the Company accepts delivery of the equipment at its operating location and 2) all final bills from Vendor are paid. The Company has determined that it did not relinquish control of the assets to the buyer-lessor under these arrangements. Therefore, the Company has accounted for this transaction as a failed sale-leaseback transaction whereby it has continued recording these assets in the consolidated balance sheet and also recorded a financing obligation for the consideration paid by the buyer-lessor. The Company currently expects the lease term to commence in 2024, and the repayment schedule below assumes payments under the 36 month term commence on December 1, 2024.

Current wording

In connection with the above, CSC has funded $20.3 million for purposes of procuring equipment from a Vendor, which had previously been ordered by the Company prior to entering into these agreements with CSC. CSC will lease this equipment back to the Company under a 36-month lease, which will commence when the Company accepts delivery of the equipment at its operating location and all final bills from Vendor are paid (the "Schedule Commencement Date"). The Company has determined that it did not relinquish control of the assets to the buyer-lessor under these arrangements. Therefore, the Company has accounted for this transaction as a failed sale-leaseback transaction whereby it has continued recording these assets in the Consolidated Balance Sheets and also recorded a financing obligation for the consideration paid by the buyer-lessor. The Company currently expects the lease term to commence in 2026 and the repayment schedule assumes payments under the 36-month commence on July 1, 2026.

Previous wording

On May 8, 2023, the Company entered into a $ 40.0 million Term Loan Facility pursuant to the Term Loan Credit Agreement dated as of May 8, 2023, among the Guarantors and Pure Plastic LLC (as Lender, Administrative Agent, and Security Agent), which matures on December 31, 2025. The Term Loan Credit Agreement was amended on August 21, 2023. Affiliates of the Lender are greater than 5% beneficial owners of the Company. Balances related to the Term Loan Credit Agreement are recorded within related party note payable in the consolidated balance sheets and, in certain instances, the Term Loan Credit Agreement is referred to as the “Related party note payable.”

Current wording

On May 8, 2023, the Company entered into a $40.0 million Term Loan Facility pursuant to the Term Loan Credit Agreement dated as of May 8, 2023, among the Guarantors and Pure Plastic LLC (as Lender, Administrative Agent, and Security Agent), which matures on December 31, 2025. The Term Loan Credit Agreement was amended on August 21, 2023. Affiliates of the Lender are greater than 5% beneficial owners of the Company. Balances related to the Term Loan Credit Agreement are recorded within related party note payable in the Consolidated Balance Sheets and, in certain instances, the Term Loan Credit Agreement is referred to as the “Related party note payable.”

Previous wording

The Term Loan Facility is structured as a single-draw, delayed draw term loan. The Lender funded the term loan on May 17, 2023 (the “Funding Date”). Amounts outstanding under the Term Loan Credit Agreement will bear interest at a variable annual rate equal to Term SOFR (as defined in the Term Loan Credit Agreement) in effect for such period plus an applicable margin. The applicable margin is equal to 7.5% and the interest rate for the outstanding term loan was 12.9% as of December 31, 2023. The Company is also required to pay, on the Funding Date, (i) a closing fee to the Lenders, equal to 2.00% times the aggregate principal amount of the term loans funded by the Lenders on the Funding Date, (ii) a commitment fee to the Lenders equal to 1.00% times the aggregate principal amount of each Lender’s commitments on the Funding Date, (iii) a syndication fee to the Administrative Agent equal to 0.50% times the aggregate commitments of the Lenders on the Funding Date and (iv) a monitoring fee equal to $200,000 to the Administrative Agent for the account of the Administrative Agent and the Security Agent on the Funding Date and each anniversary of the Funding Date until maturity of the term loan. Additionally, the term loan will be issued with a 5.00% original issue discount. Subject to timely prior written notice, payment of breakage fees, if any, and payment of a prepayment premium equal to (i) 12% if such prepayment occurs during the first year following the closing date or (ii) 8% thereafter, the Company may at any time and from time to time voluntarily prepay all or any portion of any outstanding borrowings. The Company incurred $3.4 million of interest cost during the year ended December 31, 2023. The interest due to date of $3.1 million was paid entirely in kind, which increased the principal amount of the Term Loan Facility by this amount (the “PIK Interest”). The Company has the contractual right to pay all interest payments in kind and may make this election for all interest payments for the duration of the Term Loan Facility. The repayment schedule presented in “Note 3 - Notes Payable and Debt Instruments” does not contemplate future PIK Interest.

Current wording

The Term Loan Facility was structured as a single-draw, delayed draw term loan. The Lender funded the term loan on May 17, 2023 (the “Funding Date”). Amounts outstanding under the Term Loan Credit Agreement will bear interest at a variable annual rate equal to Term SOFR (as defined in the Term Loan Credit Agreement) in effect for such period plus an applicable margin. The applicable margin is equal to 7.5% and the interest rate for the outstanding term loan was 12.9% as of December 31, 2023. The Company is also required to pay, on the Funding Date, (i) a closing fee to the Lenders, equal to 2.00% times the aggregate principal amount of the term loans funded by the Lenders on the Funding Date, (ii) a commitment fee to the Lenders equal to 1.00% times the aggregate principal amount of each Lender’s commitments on the Funding Date, (iii) a syndication fee to the Administrative Agent equal to 0.50% times the aggregate commitments of the Lenders on the Funding Date and (iv) a monitoring fee equal to $200,000 to the Administrative Agent for the account of the Administrative Agent and the Security Agent on the Funding Date and each anniversary of the Funding Date until maturity of the term loan. Additionally, the term loan will be issued with a 5.00% original issue discount. Subject to timely prior written notice, payment of breakage fees, if any, and payment of a prepayment premium equal to (i) 12% if such prepayment occurs during the first year following the closing date or (ii) 8% thereafter, the Company may at any time and from time to time voluntarily prepay all or any portion of any outstanding borrowings. The Company incurred $1.4 million of interest cost during the year ended December 31, 2024. The interest due through December 31, 2023 of $3.1 million was paid entirely in kind, which increased the principal amount of the Term Loan Facility by this amount (the “PIK Interest”). The Company has the contractual right to pay all interest payments in kind and may make this election for all interest payments for the duration of the Term Loan Facility. The repayment schedule presented in “Note 3 - Notes Payable and Debt Instruments” does not contemplate future PIK Interest.

Previous wording

On March 1, 2024, PCT amended the Term Loan Credit Agreement to (i) increase the amount available to the Company under the permitted indebtedness covenant basket for the Revolving Credit Facility from $150,000,000 to $200,000,000 and (ii) obtain a carve out to permit the Company to purchase the Revenue Bonds.

Current wording

On March 1, 2024, PCT increased the amount available under the Term Loan Credit Agreement's permitted indebtedness covenant basket for the Revolving Credit Facility from $150.0 million to $200.0 million and obtained a carveout to permit the Company to purchase the Revenue Bonds. Each of PureCycle Technologies Holdings Corp. and PCT LLC are subsidiaries of the Company.

Previous wording

On August 24, 2023, the Company completed the private offering of $250.0 million total aggregate principal amount of 7.25% Green Convertible Senior Notes due 2030 (the “Notes”). Each $1,000 principal amount at maturity of the Notes was issued at a price of $900. An amount equal to the difference between the issue price and the principal amount at maturity will accrete from the original issue date through August 15, 2027. The Notes are senior unsecured obligations of the Company. Entities affiliated with Sylebra Capital Management purchased $50.0 million aggregate principal amount at maturity of Notes.

Current wording

On August 24, 2023, the Company completed the private offering of $250.0 million total aggregate principal amount of 7.25% Green Convertible Senior Notes due 2030 (the “Initial Notes”). Each $1,000 principal amount at maturity of the Notes was issued at a price of $900. An amount equal to the difference between the issue price and the principal amount at maturity will accrete from the original issue date through August 15, 2027. The Notes are senior unsecured obligations of the Company. Entities affiliated with Sylebra Capital Management purchased $50.0 million aggregate principal amount at maturity of Notes.

Previous wording

The net proceeds from this offering, excluding any offering expenses, were approximately $218.5 million, after deducting the initial purchaser’s discounts and fees paid to our financial advisor. The Company intends to allocate an amount equal to the net proceeds from this offering to the financing and refinancing of recently completed and future Eligible Green Projects (as defined below) in the United States. In particular, the Company intends to allocate the net proceeds from this offering to make payments on certain long-lead items and fund initial outside battery limits engineering design work, both associated with a multi-line purification facility to be built in Augusta, Georgia. Pending such allocation, the Company intends to use the remaining net proceeds for general corporate purposes. As of December 31, 2023, the Company has allocated $209.0 million of the proceeds to Eligible Green Projects, which includes historical spend through December 31, 2023, related to Augusta purification lines 1 and 2, as well as the PreP facilities in process that will provide feedstock for the Augusta Facility. Funds remaining to allocate, as of December 31, 2023, are $9.5 million.

Current wording

The net proceeds from this offering, excluding any offering expenses, were approximately $218.5 million, after deducting the initial purchaser’s discounts and fees paid to our financial advisor. The Company intends to allocate an amount equal to the net proceeds from this offering to the financing and refinancing of recently completed and future Eligible Green Projects (as defined below) in the United States. In particular, the Company intends to allocate the net proceeds from this offering to (1) make payments on certain long-lead items (2) fund initial inside and outside battery limits engineering design work, all of which are associated with a multi-line purification facility to be built in Augusta, Georgia, (3) for certain feedstock preparation (“PreP”) equipment and (4) a research and development lab. Pending such allocation, the Company intends to use the remaining net proceeds for general corporate purposes.

Previous wording

“Eligible Green Projects” means: (i) investments in acquisitions of buildings; (ii) building developments or redevelopments; (iii) renovations in existing buildings; and (iv) tenant improvement projects, in each case, that have received, or are expected to receive, in the three years prior to the issuance of the Notes or during the term of the Notes, a Leadership in Energy and Environmental Design (LEED) Silver, Gold or Platinum certification (or environmentally equivalent successor standards).

Current wording

“Eligible Green Projects” means: investments in (i) acquisitions of buildings; (ii) building developments or redevelopments; (iii) renovations in existing buildings; and (iv) tenant improvement projects, in each case, that have received, or are expected to receive, in the three years prior to the issuance of the Notes or during the term of the Notes, a Leadership in Energy and Environmental Design (LEED) Silver, Gold or Platinum certification (or environmentally equivalent successor standards). Prior to issuing the Notes and as part of its overall business plan, the Company has focused on the value of the sustainability opportunities PureFive™ resin offers to support expanding a circular economy. To pursue those opportunities, the Company purchased equipment and commissioned design services for the Augusta Facility and PreP facilities that will enable the Company to advance circular economy adapted products, production technologies and processes, and/or research and development related to recycling waste polypropylene. We believe those legacy purchases and designs should complement the Company’s Eligible Green Projects development.

Previous wording

On March 14, 2023, PCT secured a surety bond in the amount of $25.0 million to provide financial assurance related to its performance under a certain vendor contract, which expires at the earlier of satisfaction of the obligation, termination of the related vendor contract, or one year from issuance (subject to renewal within one year). On February 14, 2024, PCT renewed the surety bond in the amount of $25.0 million and it will expire at the earlier of satisfaction of the obligation, termination of the related vendor contract, or one year from the renewal date, which is March 14, 2024.

Current wording

On March 14, 2023, PCT secured a surety bond in the amount of $25.0 million to provide financial assurance related to its performance under a certain vendor contract, which expires at the earlier of satisfaction of the obligation, termination of the related vendor contract, or one year from issuance (subject to renewal within one year). Effective March 14, 2024, PCT renewed the surety bond in the amount of $25.0 million. Effective July 1, 2024, the amount increased from $25.0 million to $45.9 million. Effective October 4, 2024, the amount decreased from $45.9 million to $8.1 million as a result of PCT funding a restricted escrow account. The surety bond will expire at the earlier of satisfaction of the obligation, termination of the related vendor contract, or December 31, 2025.

Previous wording

The Company evaluates the recoverability of long-lived assets when events and circumstances indicate that the assets may be impaired and the undiscounted net cash flows estimated to be generated by those assets are less than their carrying value. If the net carrying value exceeds the fair value, an impairment loss exists and is calculated based on either estimated salvage value or estimated orderly liquidation value.

Current wording

The Company evaluates the recoverability of long-lived assets when events and circumstances indicate that the assets may be impaired and the undiscounted net cash flows estimated to be generated by those assets are less than their carrying value. If the net carrying value exceeds the fair value, an impairment loss exists and is calculated as the amount by which the carrying amount of a long-lived asset or asset group exceeds its fair value.

Previous wording

During 2023, PCT identified certain impairment triggers relating to our asset group, but the undiscounted pre-tax cash flow analysis did not result in an impairment. Refer to Note 2 Summary of Significant Accounting Policies in the Consolidated Financial Statements. The undiscounted pre-tax cash flows were based on significant assumptions including management’s best estimates of the expected future cash flows, and the estimated useful lives of the asset group. These estimates required considerable judgment and are sensitive to changes in underlying assumptions such as future commodity prices, margins on UPR Resin, operating rates and capital expenditures including repairs and maintenance. As a result, there can be no assurance that the estimates and assumptions made for purposes of our impairment determination will prove to be an accurate prediction of the future.

Current wording

The assessment of impairment indicators and the recoverability of our capitalized assets require significant judgment including management's best estimates of the expected future cash flows and the estimated useful lives of the asset group. These estimates are sensitive to changes in underlying assumptions such as future commodity prices, margins on future resin sales, production rates, operating expenses, including repairs and maintenance, and capital expenditures. As a result, there can be no assurance that the estimates and assumptions made for purposes of our impairment determination will prove to be an accurate prediction of the future.

Previous wording

A summary of how each significant assumption was developed for our warrant liabilities is as follows:

Current wording

The risk-free interest rate over the warrant’s expected term. A summary of how each significant assumption was developed for our warrant liabilities is as follows:

Previous wording

The Company has determined that the Series A Warrants are a level 2 fair value measurement with the only input being the market price of its publicly-traded warrants.

Current wording

The Company has determined that the Series A Warrants are a level 2 fair value measurement with the only input being the market price of its publicly-traded warrants. The Company has determined that the RTI Warrants, Private Warrants, Series B Warrants, and Series C Warrants are a level 3 fair value measurement. Refer to Note 12 – Fair Value of Financial Instruments for further information.