MICRON TECHNOLOGY INC

Previous wording

In addition to the factors discussed elsewhere in this Form 10-K, this section discusses important factors which could cause actual results or events to differ materially from those contained in any forward-looking statements made by us. The order of presentation is not necessarily indicative of the level of risk that each factor poses to us. Any of these factors could have a material adverse effect on our business, results of operations, financial condition, or stock price. Our operations could also be affected by other factors that are presently unknown to us or not considered significant.

Current wording

In addition to the factors discussed elsewhere in this Annual Report on Form 10-K, this section discusses important factors which could cause actual results or events to differ materially from those contained in any forward-looking statements made by us. The order of presentation is not necessarily indicative of the level of risk that each factor poses to us. Any of these factors could have a material adverse effect on our business, results of operations, financial condition, or stock price. Our operations could also be affected by other factors that are presently unknown to us or not considered significant.

Previous wording

•availability and quality of materials, supplies, electrical power, water, and capital equipment, or dependency on third-party service providers;

Current wording

•availability and quality of materials, supplies, electrical power, gas, water, and capital equipment, or dependency on third-party service providers;

Previous wording

•environmental, social, and governance expectations or standards;

Current wording

•sustainability and governance expectations or standards;

Previous wording

We have experienced significant volatility in our average selling prices and may continue to experience such volatility in the future. In the past five years, annual percentage changes in DRAM average selling prices have ranged from plus low-teen percentage range to a minus high-40% range. In the past five years, annual percentage changes in NAND average selling prices have ranged from plus low-30% to a minus low-50% range. In some prior periods, average selling prices for our products have been below our manufacturing costs and we may experience such circumstances in the future. Average selling prices for our products that decline faster than our costs have recently had an adverse effect on our business and results of operations, and in future periods could have a material adverse effect on our business, results of operations, or financial condition.

Current wording

We have experienced significant volatility in our average selling prices and may continue to experience such volatility in the future. In the past five years, annual percentage changes in DRAM average selling prices have ranged from plus low 40% to a minus high 40% range. In the past five years, annual percentage changes in NAND average selling prices have ranged from plus low 30% to a minus low 50% range. In some prior periods, average selling prices for our products have been below our manufacturing costs and we may experience such circumstances in the future. In periods of significant declines in average selling prices for our products, we have experienced adverse effects on our business and results of operations. Significant declines in average selling prices in future periods could have a material adverse effect on our business, results of operations, or financial condition.

Previous wording

•higher costs of goods and services due to inflationary pressures or market conditions; and

Current wording

•higher costs of goods and services due to, among other things, inflationary pressures, regulatory actions, including tariffs or trade restrictions, increased input costs, or market conditions; and

Previous wording

Many factors may result in a reduction of our output or a delay in ramping production, which could lead to underutilization of our production assets. These factors may include, among others, a weak demand environment, industry oversupply, inventory surpluses, difficulties in ramping emerging technologies, supply chain disruptions, and delays from equipment suppliers. See “Part II – Item 7. Management’s Discussion and Analysis of Financial Condition and Results of Operations – Overview – Industry Conditions” for information regarding recent underutilization charges. A significant portion of our manufacturing costs are fixed and do not vary proportionally with changes in production output. As a result, lower utilization, lower wafer output, and corresponding increases in our per gigabit manufacturing costs could result in higher inventory carrying costs, and have had, and may continue to have, an adverse effect on our gross margins, business, results of operations, or financial condition.

Current wording

Many factors may result in a reduction of our output or a delay in ramping production, which have in the past and could in the future lead to underutilization of our production assets. These factors may include, among others, a weak demand environment, industry oversupply, inventory surpluses, difficulties in ramping emerging technologies, supply chain disruptions, and delays from equipment suppliers. A significant portion of our manufacturing costs are fixed and do not vary proportionally with changes in production output. As a result, lower utilization, lower wafer output, and corresponding increases in our per gigabit manufacturing costs could result in higher inventory carrying costs, and have had, and may continue to have, an adverse effect on our gross margins, business, results of operations, or financial condition.

Previous wording

We have a broad portfolio of products to address our customers’ needs, which span multiple market segments and are subject to rapid technological changes. Our manufacturing costs on a per gigabit basis vary across our portfolio as they are largely influenced by the technology node in which the solution was developed. We strive to balance our demand and supply for each technology node, but the dynamics of our markets and our customers can create periods of imbalance, which can lead us to carry elevated inventory levels. Consequently, we may incur charges in connection with obsolete or excess inventories, or we may not fully recover our costs, which would reduce our gross margins. For example, in 2023, we recorded aggregate charges of $1.83 billion to write down the carrying value of our inventories to their estimated net realizable value. In addition, due to the customized nature of certain products we manufacture, we may be unable to sell certain finished goods inventories to alternative customers or manufacture in-process inventory to different specifications, which may result in excess and obsolescence charges in future periods.

Current wording

We have a broad portfolio of products to address our customers’ needs, which span multiple market segments and are subject to rapid technological changes. Our manufacturing costs on a per gigabit basis vary across our portfolio as they are largely influenced by the technology node in which the solution was developed. We strive to balance our demand and supply for each technology node, but the dynamics of our markets and our customers can create periods of imbalance, which can lead us to carry elevated inventory levels and underutilized capacity. Consequently, we may incur charges in connection with obsolete or excess inventories, or we may not fully recover our costs, which would reduce our gross margins. In addition, due to the customized nature of certain products we manufacture, we may be unable to sell certain finished goods inventories to alternative customers or manufacture in-process inventory to different specifications, which may result in excess and obsolescence charges in future periods.

Previous wording

We may not be able to predict or quickly respond to trends in the dynamics of our markets and our customers or changes in customer demand, which could negatively impact our gross margin. Our inability to prevent deterioration of or improve gross margins could have a material adverse effect on our business, results of operations, or financial condition.

Current wording

We may not be able to predict or quickly respond to trends in the dynamics of our markets and our customers or changes in customer demand, which could negatively impact our gross margin. Although AI is a relatively new demand driver for our products, it is evolving rapidly, and the expected timing and amount of investments related to AI can change significantly. As a result, it may be difficult to accurately forecast such demand and we may incur costs in anticipation of demand that ultimately does not materialize. If such demand does materialize, but is lower than expected, we may not be able to reduce our costs in response, which would adversely impact our gross margins. Our inability to prevent deterioration of or improve gross margins could have a material adverse effect on our business, results of operations, or financial condition.

Previous wording

In addition to our U.S. operations, a substantial portion of our operations are conducted in Taiwan, Singapore, Japan, Malaysia, China, and India, and many of our customers, suppliers, and vendors also operate internationally. In 2024, nearly half of our revenue was from sales to customers who have headquarters located outside the United States, while over 80% of our revenue in 2024 was from products shipped to customer locations outside the United States.

Current wording

In addition to our U.S. operations, a substantial portion of our operations are conducted in Taiwan, Singapore, Japan, Malaysia, China, and India, and many of our customers, suppliers, and vendors also operate internationally. In 2025, approximately one-third of our revenue was from sales to customers who have headquarters located outside the United States, while approximately 80% of our revenue in 2025 was from products shipped to customer locations outside the United States.

Previous wording

•export and import duties, changes to import and export regulations, customs regulations and processes, and restrictions on the transfer of funds, including currency controls in China, which could negatively affect the amount and timing of payments from certain of our customers and, as a result, our cash flows;

Current wording

•export and import duties, changes to import and export regulations, customs regulations and processes, and restrictions on the transfer of funds, including currency controls and global tariffs, which could negatively affect the amount and timing of payments from certain of our customers and, as a result, our cash flows;

Previous wording

•compliance with U.S. and international laws involving international operations, including the Foreign Corrupt Practices Act of 1977, as amended, sanctions and anti-corruption laws, export and import laws, and similar rules and regulations;

Current wording

•compliance with U.S. and international laws involving international operations, including the Foreign Corrupt Practices Act of 1977, as amended, sanctions and anti-corruption laws, export and import laws, intellectual property, cybersecurity and data privacy laws, and similar rules and regulations;

Previous wording

•disruptions to manufacturing or R&D activities as a result of actions imposed by foreign governments;

Current wording

•disruptions to manufacturing or R&D activities as a result of actions imposed by governments;

Previous wording

In addition, the U.S. government has in the past and continues to restrict American firms, including us, from selling products and software to certain of our customers and may in the future impose similar restrictions on one or more of our significant customers. These restrictions may not prohibit our competitors from selling similar products to our customers, which may result in our loss of sales and market share. Even as such restrictions are lifted, financial or other penalties or continuing export restrictions imposed with respect to our customers could have a continuing negative impact on our future revenue and results of operations, and we may not be able to recover any customers or market share we lose, or make such recoveries at acceptable average selling prices, while complying with such restrictions.

Current wording

In addition, the U.S. government has in the past and continues to restrict American firms, including us, from selling products and software to certain of our customers and may in the future impose similar restrictions on one or more of our significant customers. We may not be able to fully prevent the unauthorized resale, diversion, or misuse of our products by third parties. These restrictions may not prohibit our competitors from selling similar products to our customers, which may result in a loss of sales and market share. Even as such restrictions are lifted, financial or other penalties or continuing export restrictions imposed with respect to our customers could have a continuing negative impact on our future revenue and results of operations, and we may not be able to recover any customers or market share we lose, or make such recoveries at acceptable average selling prices, while complying with such restrictions.

Previous wording

We face intense competition in the semiconductor memory and storage markets from a number of companies, including Kioxia Holdings Corporation; Samsung Electronics Co., Ltd.; SK hynix Inc.; and Western Digital Corporation. Our competitors may use aggressive pricing to obtain market share. Some of our competitors are large corporations or conglomerates that may have a larger market share and greater resources to invest in technology, capitalize on growth opportunities, and withstand downturns in the semiconductor markets in which we compete. Consolidation of industry competitors could put us at a competitive disadvantage as our competitors may benefit from increased manufacturing scale and a stronger product portfolio. We operate in different jurisdictions than our competitors and may be impacted by unfavorable changes in currency exchange rates.

Current wording

We face intense competition in the semiconductor memory and storage markets from a number of companies, including Samsung Electronics Co., Ltd.; SK hynix Inc.; Kioxia Holdings Corporation; Sandisk Corporation; ChangXin Memory Technologies, Inc. (“CXMT”); and Yangtze Memory Technologies Co., Ltd. (“YMTC”). Our competitors may use aggressive pricing to obtain market share. Some of our competitors are large corporations or conglomerates that may operate in jurisdictions with lower labor and compliance costs and may have a larger market share and greater resources to invest in technology, capitalize on growth opportunities, and withstand downturns in the semiconductor markets in which we compete. Consolidation of industry competitors could put us at a competitive disadvantage as our competitors may benefit from increased manufacturing scale and a stronger product portfolio. Alternatively, new entrants into the memory and storage market could have a significant adverse impact on our competitive position. We operate in different jurisdictions than our competitors and may be impacted by unfavorable changes in currency exchange rates, import/export restrictions, and other trade regulations, including tariffs.

Previous wording

In addition, some governments may provide, or have provided and may continue to provide, significant assistance, financial or otherwise, to some of our competitors or to new entrants and may intervene in support of national industries and/or competitors. In particular, we face the threat of increasing competition as a result of significant investment in the semiconductor industry by the Chinese government and various state-owned or affiliated entities, in companies such as Yangtze Memory Technologies Co., Ltd. (“YMTC”) and ChangXin Memory Technologies, Inc. (“CXMT”). In addition, the CAC’s decision that critical information infrastructure operators in China may not purchase Micron products had an adverse impact on our ability to compete effectively in China and elsewhere.

Current wording

In addition, governments have provided, and may continue to provide, significant assistance, financial or otherwise, to some of our competitors or to new entrants and may intervene in support of national industries and/or competitors. As a result, we face the threat of increasing competition and DRAM and NAND oversupply due to significant investment in the semiconductor industry, including by the Chinese government and various state-owned or affiliated entities, such as CXMT and YMTC. In addition, the CAC’s decision that critical information infrastructure operators in China may not purchase Micron products had an adverse impact on our ability to compete effectively in China and elsewhere.

Previous wording

We and our competitors generally seek to increase supply to address growing market demands, improve yields, and reduce die size, which could result in significant increases in worldwide supply and downward pressure on prices. Increases in worldwide supply of semiconductor memory and storage also result from fabrication capacity expansions, either by way of new facilities, increased capacity utilization, or reallocation of other semiconductor production to semiconductor memory and storage production. Our competitors may increase capital expenditures resulting in future increases in worldwide supply. We, and some of our competitors, have plans to ramp, or are constructing or ramping, production at new fabrication facilities. Increases in worldwide supply of semiconductor memory and storage, if not accompanied by commensurate increases in demand, could lead to declines in average selling prices for our products and could materially adversely affect our business, results of operations, or financial condition. Additionally, rapid technological change in markets we serve could contribute to shortened product life cycles and a decline in average selling prices of our products. If competitors are more successful at developing or implementing new product or process technology, their products could have cost or performance advantages.

Current wording

We intend to advance our process technology to increase bit output per wafer, improve yields, and increase wafer supply. In addition, our competitors may increase capital expenditures resulting in future increases in worldwide supply. We, and some of our competitors, have plans to construct new fabrication facilities and/or ramp production at existing fabrication facilities. Increases in worldwide supply of semiconductor memory and storage, if not accompanied by commensurate increases in demand, could lead to declines in average selling prices for our products and could materially adversely affect our business, results of operations, or financial condition. Additionally, rapid technological change in markets we serve could contribute to shortened product life cycles and a decline in average selling prices of our products. If competitors are more successful at developing or implementing new product or process technology, their products could have cost or performance advantages.

Previous wording

Our key semiconductor memory and storage technologies face technological barriers to continue to meet long-term customer needs. These barriers include achieving acceptable yields and quality for HBM products with their multiple memory chip layers, potential limitations on stacking additional 3D memory layers, increasing bits per cell (i.e., cell levels), meeting higher density requirements, developing advanced packaging solutions, improving power consumption and reliability, and delivering advanced features and higher performance. We may face technological barriers to continue to shrink our products at our current or historical rate, which has generally reduced per gigabit cost. We have invested and expect to continue to invest in R&D for new and existing products and process technologies, such as EUV lithography, to continue to deliver advanced product requirements. Such new technologies can add complexity and risk to our schedule and may affect our costs and production output. We may be unable to recover our investment in R&D or otherwise realize the economic benefits of reducing die size or increasing memory and storage densities. Our competitors are working to develop new memory and storage technologies that may offer performance and/or cost advantages to existing technologies and render existing technologies obsolete. Accordingly, our future success may depend on our ability to develop and produce viable and competitive new memory and storage technologies.

Current wording

Our key semiconductor memory and storage technologies face technological barriers to continue to meet long-term customer needs. These barriers include achieving acceptable yields and quality for HBM products with their multiple chip layers, potential limitations on stacking additional 3D memory layers, increasing bits per cell (i.e., cell levels), meeting higher density requirements, developing advanced packaging solutions, improving power consumption and reliability, and delivering advanced features and higher performance. We may face technological barriers to continue to shrink our products at our current or historical rate, which has generally reduced per gigabit cost. We have invested and expect to continue to invest in R&D for new and existing products and process technologies, such as EUV lithography, to continue to deliver advanced product requirements. Such new technologies can add complexity and risk to our schedule and may affect our costs and production output. We may be unable to recover our investment in R&D or otherwise realize the economic benefits of reducing die size or increasing memory and storage densities. Our competitors are working to develop new memory and storage technologies that may offer performance and/or cost advantages to existing technologies and render existing technologies obsolete. Accordingly, our future success may depend on our ability to develop and produce viable and competitive new memory and storage technologies.

Previous wording

We are developing new products, including system-level memory and storage products and solutions, which complement our traditional products or leverage their underlying design or process technology. We have invested and expect to continue to invest in new semiconductor product and system-level solution development. We are increasingly differentiating our products and solutions to meet the specific demands of our customers, which increases our reliance on our customers’ ability to accurately forecast the needs and preferences of their customers. Recent technologies, such as generative AI models have emerged, and while they have driven increased demand for HBM and other advanced products in the data center and other markets, the long-term trajectory is unknown and associated demand may fluctuate. As a result, our product demand forecasts may be impacted significantly by the strategic actions of our customers. In addition, our ability to successfully introduce new products often requires us to make product specification decisions multiple years in advance of when new products enter the market.

Current wording

We are developing new products, including system-level memory and storage products and solutions, which complement our traditional products or leverage their underlying design or process technology. We have invested and expect to continue to invest in new semiconductor product and system-level solution development. We are increasingly differentiating our products and solutions to meet the specific demands of our customers, which increases our reliance on our customers’ ability to accurately forecast the needs and preferences of their customers.

Previous wording

It is important that we deliver products in a timely manner with increasingly advanced performance characteristics at the time our customers are designing and evaluating samples for their products. If we do not meet their product design schedules, our customers may exclude us from further consideration as a supplier for those products. The process to develop new products requires us to demonstrate advanced functionality, performance, and reliability, often well in advance of a planned ramp of production, in order to secure design wins with our customers. Many factors may negatively impact our ability to meet anticipated timelines and/or expected or required quality standards with respect to the development of certain of our products. In addition, some of our components have long lead-times, requiring us to place orders up to a year in advance of anticipated demand. Such long lead-times increase the risk of excess inventory or loss of sales in the event our forecasts vary substantially from actual demand.

Current wording

Our product demand may also be impacted significantly by the strategic actions of our customers. It is important that we deliver products in a timely manner that meet customer requirements at the time our customers are designing and evaluating samples for their products. If we do not meet their product design schedules, our customers may exclude us from further consideration as a supplier for those products. The process to develop new products requires us to demonstrate advanced functionality, performance, and reliability, often well in advance of a planned ramp of production, in order to secure design wins with our customers. Many factors may negatively impact our ability to meet anticipated timelines and/or expected or required quality standards with respect to the development of certain of our products. In addition, some of our components have long lead-times, requiring us to place orders up to a year in advance of anticipated demand. Such long lead-times increase the risk of excess inventory or loss of sales in the event our forecasts vary substantially from actual demand.

Previous wording

•margins generated from sales of these products will allow us to recover costs of development efforts;

Current wording

•margins and cash flows generated from sales of these products will allow us to recover costs of development efforts;

Previous wording

Our construction projects are highly dependent on available sources of materials, and specialized equipment, as well as labor, skilled sub-contractors and other service providers. Increasing demand, supply constraints, inflation, and other market conditions could result in shortages and higher costs. Additionally, difficulties in obtaining labor, skilled sub-contractors and other service providers or other resources could result in delays in completion of our construction projects and cost increases, including costs to operate these facilities.

Current wording

Our construction projects are highly dependent on available sources of materials, and specialized equipment, as well as labor, skilled sub-contractors and other service providers. Increasing demand, supply constraints, inflation, tariffs, trade restrictions, and other market conditions could result in shortages and higher costs. Additionally, difficulties in obtaining labor, skilled sub-contractors and other service providers or other resources could result in delays in completion of our construction projects and cost increases, including costs to operate these facilities.

Previous wording

In the United States and in certain other regions, fab building has been uncommon in recent years. Concurrent semiconductor expansion projects across the industry introduce significant competition for the limited pool of construction talent with requisite expertise and experience in these regions. As such, expanding production capacity in the United States and certain other regions may introduce more challenges than we would experience in geographies with more established ecosystems.

Current wording

27 | 2025 10-K construction talent with requisite expertise and experience in these regions. As such, expanding production capacity in the United States and certain other regions may introduce more challenges than we would experience in geographies with more established ecosystems.

Previous wording

•inability to realize expected grants, investment tax credits, and other government incentives, including through the U.S. CHIPS and Science Act of 2022 (“CHIPS Act”) and other national, international, state, and local grants;

Current wording

•inability to realize expected grants, investment tax credits, and other government incentives, including through the CHIPS Act and other national, international, state, and local grants;

Previous wording

•potential changes in laws or provisions of grants, investment tax credits, and other government incentives;

Current wording

•potential changes in laws or provisions of grants, investment tax credits, and other government incentives, including the CHIPS Act;

Previous wording

•delays and potential restrictions related to environmental regulations or permits;

Current wording

•delays and potential restrictions related to environmental and other government regulations or permits;

Previous wording

From time to time, we have experienced the impacts from the above items and, because these risks are a characteristic of our business, we expect to experience them in the future. Depending on the nature and extent of the impact from these risks, we may be unable to produce sufficient capacity in the expected time frame which could result in delays in the completion of our construction projects and increased costs, including costs to operate these facilities.

Current wording

From time to time, we have experienced impacts from certain of the above items and, because these risks are a characteristic of our business, we expect to experience them in the future. Depending on the nature and extent of the impact from these risks, we may be unable to produce sufficient capacity in the expected timeframe which could result in delays in the completion of our construction projects and increased costs, including costs to operate these facilities.

Previous wording

We invest our capital in areas that we believe best align with our business strategy and optimize future returns. Investments in capital expenditures may not generate expected returns or cash flows. Significant judgment is required to determine which capital investments will result in optimal returns, and we could invest in projects that are ultimately less profitable than those projects we do not select. Delays in completion and ramping of new production facilities, or failure to optimize our investment choices, could significantly impact our ability to realize expected returns on our capital expenditures.

Current wording

We have a broad portfolio of products to address our customers’ needs, which span multiple market segments and are subject to rapid technological changes. We invest our capital in areas that we believe best align with our business strategy and optimize future returns. Investments in capital expenditures may not generate expected returns or cash flows. Significant judgment is required to determine which capital investments will result in optimal returns, and we could invest in projects that are ultimately less profitable than those projects we do not select. Our strategic decision-making process involves careful evaluation and prioritization of investments to ensure alignment with our long-term goals. Additionally, we may choose to exit business segments that do not provide us with optimal returns. As we streamline our product portfolio, we may face execution risks that could impact our ability to support demand and maintain share in certain markets. Further, as we continue to optimize the efficiency of our fabrication facilities to support demand from leading edge notes, any delays in completion and ramping of new production facilities, or failure to optimize our investment choices, could significantly impact our ability to realize expected returns on our capital expenditures.

Previous wording

Our incentives from various governments are conditioned upon achieving or maintaining certain outcomes and the compliance requirements and are subject to reduction, termination, clawback, or could impose certain limitations on our business.

Current wording

Our incentives from various governments are conditioned upon achieving or maintaining certain outcomes and satisfying compliance requirements and are subject to reduction, termination, or clawback, and could impose certain limitations on our business.

Previous wording

We have received, and may in the future continue to receive, benefits and incentives from national, state, and local governments in various regions of the world designed to encourage us to establish, maintain, or increase investment, workforce, research and development, or production in those regions. Our future business plans are impacted by obtaining these government incentives, which may take various forms, including grants, subsidies, loans, and tax arrangements, and typically require us to achieve or maintain certain levels of investment, capital spending, employment, technology deployment or development milestones, construction or production milestones, or research and development activities to qualify for such incentives or could restrict us from undertaking certain activities. In some cases, these incentives have additional terms and conditions regarding our business operations or governance that are required to be satisfied as a condition to receive incentives or disbursements. Compliance with these terms and conditions may add complexity to our operations and increase our costs.

Current wording

We have received, and may in the future continue to receive, benefits and incentives from national, state, and local governments in various regions of the world designed to encourage us to establish, maintain, or increase investment, workforce, research and development, or production in those regions. However, there is no guarantee that such government incentives and benefits will continue to be available in the future on the same terms, terms that are acceptable to us or at all and existing incentives could be modified or terminated by government authorities. In addition, we have discretion in the timing of use of certain of these incentives. If we choose to exercise such discretion due to the cyclicality of our business or other factors, we may not be able to fully utilize these incentives. Our future business plans may be impacted by obtaining these government incentives, which may take various forms, including grants, subsidies, loans, and tax arrangements, and typically require us to achieve or maintain certain levels of investment, capital spending, employment, technology deployment or development milestones, construction or production milestones, or research and development activities to qualify for such incentives or could restrict us from undertaking certain activities. We may fail to achieve these milestones, in a timely manner or at all, due to a variety of factors, some of which may be outside of our control, including a cyclical downturn in our business or global downturn. Failure to achieve such milestones could result in up to all of certain incentives being clawed back, in some cases along with interest and/or loss of project assets. In some cases, these incentives have additional terms and conditions regarding our business operations or governance that are required to be satisfied as a condition to receive incentives or disbursements. Compliance with these terms and conditions may add complexity to our operations and increase our costs and failure to comply could result in termination of incentive programs or clawbacks of incentive amounts received, in some cases along with interest and/or loss of project assets.

Previous wording

We may be unable to obtain sufficient future incentives to continue to fund a portion of our capital expenditures and operating costs, without which our cost structure may be adversely impacted and planned capital expenditures and research and development expenditures may be affected. For example, we have signed a non-binding preliminary memorandum of terms with the U.S. Department of Commerce to receive a grant under the U.S. CHIPS and Science Act of 2022 (“CHIPS Act”). These preliminary terms may not result in us receiving funding. We also cannot guarantee that we will successfully achieve or maintain outcomes or satisfy the compliance requirements to qualify for these incentives or that the granting agencies will provide or continue to provide such funding.

Current wording

We may be unable to obtain sufficient future incentives to continue to fund a portion of our capital expenditures and operating costs, without which our cost structure may be adversely impacted and planned capital expenditures and research and development expenditures may be affected. For example, in December 2024, we entered into direct funding agreements, providing funds for the construction of fab facilities in Idaho and New York, with the United States Department of Commerce (the “Department”) under the Department’s CHIPS Incentives Program established pursuant to the CHIPS Act. In June 2025, such agreements were subsequently amended to expand our investments, and we entered into a direct funding agreement to provide funds to expand and modernize our fab in Virginia. The awards under the direct funding agreements are subject to various conditions and we may not receive the funding expected on the same terms or at all. We cannot guarantee that we will successfully achieve or maintain outcomes or satisfy the compliance requirements to qualify for these incentives or that the granting agencies will provide or continue to provide such funding. See Part II, Item 8. Financial Statements and Supplementary Data, Notes to Consolidated Financial Statements, Note 20. Government Incentives.

Previous wording

These incentive arrangements typically provide the granting agencies with rights to audit our compliance with their terms and obligations. Such audits could result in modifications to, or termination of, the applicable incentive program. The incentives we receive could be subject to reduction, termination, or clawback, and any decrease or clawback of government incentives could have a material adverse effect on our business, results of operations, or financial condition.

Current wording

These incentive arrangements, including the funding agreements, typically provide the granting agencies with rights to audit our compliance with their terms and obligations. Such audits could result in modifications to, or termination of, the applicable incentive program. In addition, the incentives we receive, including the funding agreements, are in some cases subject to reduction, termination, or clawback under certain circumstances, and any decrease or clawback of government incentives could have a material adverse effect on our business, results of operations, or financial condition.

Previous wording

Our business, results of operations, or financial condition could be adversely affected by the availability and quality of materials, supplies, electrical power, water, and capital equipment, or dependency on third-party service providers.

Current wording

Our business, results of operations, or financial condition could be adversely affected by the availability and quality of materials, supplies, electrical power, gas, water, and capital equipment, or dependency on third-party service providers.

Previous wording

Our supply chain and operations are dependent on the availability of materials that meet exacting standards and the use of third parties to provide us with components and services. We generally have multiple sources of supply for our materials and services. However, only a limited number of suppliers are capable of delivering certain materials, components, and services that meet our standards and, in some cases, materials, components, or services are provided by a single or sole source, and we may be unable to qualify new suppliers on a timely basis. The availability of materials or components such as chemicals, silicon wafers, gases, photoresist, controllers, substrates, lead frames, printed circuit boards, targets, and reticle glass blanks is impacted by various factors. These factors could include a shortage of raw materials or a disruption in the processing or purification of those raw materials into finished goods. Shortages or increases in lead times have occurred in the past, are currently occurring with respect to some materials and components, and may occur from time to time in the future because of the nature of the industry. Constraints within our supply chain for certain materials and integrated circuit components could limit our bit shipments, which could have a material adverse effect on our business, results of operations, or financial condition.

Current wording

Our supply chain and operations are dependent on the availability of materials that meet exacting standards and the use of third parties to provide us with components and services. We generally have multiple sources of supply for our materials and services. However, only a limited number of suppliers are capable of delivering certain materials, components, and services that meet our standards and, in some cases, materials, components, or services are provided by a single or sole source, and we may be unable to qualify new suppliers on a timely basis. The availability of materials or components, such as chemicals, silicon wafers, gases, photoresists, semiconductors, substrates, lead frames, printed circuit boards, targets, and reticle glass blanks is impacted by various factors. These factors could include a shortage of raw materials or a disruption in the processing or purification of those raw materials into finished goods. Shortages or increases in lead times have occurred in the past, are currently occurring with respect to some materials and components, and may occur from time to time in the future because of the nature of the industry. Constraints within our supply chain for certain materials and integrated circuit components could limit our bit shipments, which could have a material adverse effect on our business, results of operations, or financial condition.

Previous wording

Our manufacturing processes are also dependent on our relationships with third-party manufacturers of controllers, analog integrated circuits, and other components used in some of our products and with outsourced semiconductor foundries, assembly and test providers, contract manufacturers, logistics carriers, and other service providers, including providers of maintenance for our advanced semiconductor manufacturing equipment and providers of electricity and other utilities. Although we have certain long-term contracts with some of our suppliers, many of these contracts do not provide for long-term capacity or pricing commitments. To the extent we do not have firm commitments from our third-party suppliers over a specific time period or for any specific capacity, quantity, and/or pricing, our suppliers may allocate capacity to their other customers and capacity and/or materials may not be available when needed or at reasonable prices. Inflationary pressures may continue to increase costs for materials, supplies, and services. Regardless of contract structure, large swings in demand may exceed our contracted supply and/or our suppliers’ capacity to meet those demand changes resulting in a shortage of parts, materials, or capacity needed to manufacture our products. In addition, if any of our suppliers were to cease operations or become insolvent, this could impact their ability to provide us with necessary supplies, and we may not be able to obtain the needed supply in a timely way or at all from other providers.

Current wording

Our manufacturing processes are also dependent on our relationships with third-party manufacturers of controllers, analog integrated circuits, and other components used in some of our products and with outsourced semiconductor foundries, assembly and test providers, contract manufacturers, logistics carriers, and other service providers, including providers of maintenance for our advanced semiconductor manufacturing equipment and providers of electricity and other utilities. Although we have certain long-term contracts with some of our suppliers, many of these contracts do not provide for long-term capacity or pricing commitments. To the extent we do not have firm commitments from our third-party suppliers over a specific time period or for any specific capacity, quantity, and/or pricing, our suppliers may allocate capacity to their other customers and capacity and/or materials may not be available when needed or at reasonable prices. Inflationary pressures may continue to increase costs for materials, supplies, and services. Regardless of contract structure, large swings in demand may exceed our contracted supply and/or our suppliers’ capacity to meet those demand changes, resulting in a shortage of parts, materials, or capacity needed to manufacture our products. In periods of shortage, we may be required to incur increased costs in order to meet our contractual commitments and demand from our customers or experience a decrease in revenue. In addition, if any of our suppliers were to cease operations or become insolvent, this could impact their ability to provide us with necessary supplies, and we may not be able to obtain the needed supply in a timely manner or at all from other providers.

Previous wording

Certain materials are primarily available in a limited number of countries, including rare earth elements, minerals, and metals. Trade disputes, geopolitical tensions, economic circumstances, political conditions, or public health issues may limit our ability to obtain such materials. Although these rare earth and other materials are generally available from multiple suppliers, China is the predominant producer of these materials. If China were to restrict or stop exporting these materials, our suppliers’ ability to obtain such supply may be constrained, and we may be unable to obtain sufficient quantities, or obtain supply in a timely manner, or at a commercially reasonable cost. Constrained supply of rare earth elements, minerals, and metals may restrict our ability to manufacture certain of our products and make it difficult or impossible to compete with other semiconductor memory and storage manufacturers who are able to obtain sufficient quantities of these materials from China.

Current wording

Certain materials are primarily available in a limited number of countries, including rare earth elements, minerals, and metals. Trade disputes, geopolitical tensions, economic circumstances, political conditions, or public health issues may limit our ability to obtain such materials. Although these rare earth and other materials are generally available from multiple suppliers, China is a predominant producer of these materials. China has in the past restricted export of certain of these materials and may in the future continue to restrict, expand restrictions, or stop exporting these or other materials, and as a result, our suppliers’ ability to obtain such supply may be constrained, and we may be unable to obtain sufficient quantities, or obtain supply in a timely manner or at a commercially reasonable cost. Constrained supply of rare earth elements, minerals, and metals may restrict our ability to manufacture certain of our products and make it difficult or impossible to compete with other semiconductor memory and storage manufacturers who are able to obtain sufficient quantities of these materials from China.

Previous wording

We and/or our suppliers and service providers could be affected by regional conflicts, civil unrest, labor disruptions, sanctions, tariffs, embargoes, or other trade restrictions, as well as laws and regulations enacted in response to concerns regarding climate change, conflict minerals, responsible sourcing practices, public health crises, or other matters, which could limit the supply of our materials and/or increase the cost. Environmental regulations could limit our ability to procure or use certain chemicals or materials in our operations or products. In addition, disruptions in transportation lines could delay our receipt of materials. Our ability to procure components to repair equipment essential for our manufacturing processes could also be negatively impacted by various restrictions or disruptions in supply chains, among other items. The disruption of our supply of materials, components, or services, or the extension of our lead times could have a material adverse effect on our business, results of operations, or financial condition.

Current wording

We and/or our suppliers and service providers could be affected by regional conflicts, acts of war, civil unrest, labor disruptions, sanctions, tariffs, embargoes, or other trade restrictions, and retaliatory actions in response to such actions, as well as laws and regulations enacted in response to concerns regarding climate change, conflict minerals, responsible sourcing practices, public health crises, or other matters, which could limit the supply of our materials and/or increase the cost. Environmental regulations could limit our ability to procure or use certain chemicals or materials in our operations or products. In addition, disruptions in transportation lines could delay our receipt of materials. Our ability to procure components to repair equipment essential for our manufacturing processes could also be negatively impacted by various restrictions or disruptions in supply chains, among other items. The disruption of our supply of materials, components, or services, or the extension of our lead times could have a material adverse effect on our business, results of operations, or financial condition.

Previous wording

Our operations are dependent on a reliable and uninterrupted supply of electrical power and water to our manufacturing facilities. Any power shortages, capacity constraints, prolonged outages, or significant or unexpected increases in the cost of power could have a material adverse effect on our business, results of operations, or financial condition.

Current wording

Our operations are dependent on a reliable and uninterrupted supply of electrical power, gas, and water to our manufacturing facilities. Any power shortages, capacity constraints, prolonged outages, or significant or unexpected increases in the cost of power could have a material adverse effect on our business, results of operations, or financial condition.

Previous wording

Downturns in regional or worldwide economies may harm our business.

Current wording

Downturns or ongoing adverse conditions in regional or worldwide economies may harm our business.

Previous wording

Downturns in regional or worldwide economies, due to inflation, geopolitics, major central bank policy actions including interest rate increases, public health crises, or other factors, have harmed our business in the past and current and future downturns could also adversely affect our business. Adverse economic conditions affect demand for devices that incorporate our products, such as personal computers, smartphones, automobiles, and servers. Reduced demand for these or other products could result in significant decreases in our average selling prices and product sales. In addition, to the extent our customers or distributors have elevated inventory levels or are impacted by a deterioration in credit markets, we may experience a decrease in short-term and/or long-term demand resulting in industry oversupply and declines in pricing for our products.

Current wording

Downturns or ongoing adverse conditions in regional or worldwide economies, due to inflation, geopolitics, changes in government borrowing or spending, trade disputes, war, major central bank policy actions including interest rate increases, public health crises, or other factors, have harmed our business in the past and current and future downturns could also adversely affect our business. Adverse economic conditions affect demand for devices that incorporate our products, such as personal computers, smartphones, automobiles, and servers. Reduced demand for memory and storage products could result in significant decreases in our average selling prices and product sales. In addition, to the extent our customers or distributors have elevated inventory levels or are impacted by a deterioration in credit markets, we may experience a decrease in short-term and/or long-term demand resulting in industry oversupply and declines in pricing for our products.

Previous wording

A deterioration of conditions in regional or worldwide credit markets could limit our ability to obtain external financing to fund our operations and capital expenditures. In addition, we may experience losses on our holdings of cash and investments due to failures of financial institutions and other parties. Difficult economic conditions may also result in a higher rate of losses on our accounts receivable due to credit defaults. Additionally, our current or potential future customers may experience cash flow problems and as a result may modify, delay, or cancel plans to purchase our products. Any inability of our current or potential future customers to pay us for our products may adversely affect our earnings and cash flow. As a result, downturns in regional or worldwide economies could have a material adverse effect on our business, results of operations, or financial condition.

Current wording

A deterioration of conditions in regional or worldwide credit markets could limit our ability to obtain external financing to fund our operations and capital expenditures. In addition, we may experience losses on our holdings of cash and investments due to failures of financial institutions and other parties. Difficult economic conditions may also result in a higher rate of losses on our accounts receivable due to credit defaults. Additionally, our current or potential future customers may experience cash flow problems and as a result may modify, delay, or cancel plans to purchase our products. Any inability of our current or potential future customers to pay us for our products may adversely affect our earnings and cash flow. As a result, downturns or ongoing adverse conditions in regional or worldwide economies could have a material adverse effect on our business, results of operations, or financial condition.