LAM RESEARCH CORP

Previous wording

In addition to the other information in this Form 10-Q, the following risk factors should be carefully considered in evaluating us and our business because such factors may significantly impact our business, operating results, and financial condition. As a result of these risk factors, as well as other risks discussed in our other SEC filings, our actual results could differ materially from those projected in any forward-looking statements. No priority or significance is intended by, nor should be attached to, the order in which the risk factors appear.

Current wording

In addition to the other information in this Form 10-Q, the following risk factors should be carefully considered in evaluating us and our business because the occurrence of any of these factors could materially and adversely affect our business, operating results, financial condition, and price of our Common Stock, and they could cause our actual results to differ materially from those contemplated in any forward-looking statements. Some of the factors, events, and contingencies discussed below may have occurred in the past, but the disclosures below are not representations as to whether or not the factors, events, or contingencies have occurred in the past and instead reflect our beliefs and opinions as to the factors, events, or contingencies that could materially and adversely affect us in the future. The risks and uncertainties described below are not the only ones we face. Our operations could also be affected by factors, events, or uncertainties that are not presently known to us or that we currently do not consider to present a material risk to us and our business. Therefore, the following discussion of risk factors should not be considered a complete statement of all the potential risks or uncertainties that we face. No priority or significance is intended by, nor should be attached to, the order in which the risk factors appear.

Previous wording

Rapid technological changes in semiconductor manufacturing processes subject us to increased pressure to develop technological advances that enable those processes. We believe that our future success depends in part upon our ability to develop and offer new products with improved capabilities and to continue to enhance our existing products. If new products or existing products have reliability, quality, design, or safety problems, our performance may be impacted by reduced orders, higher manufacturing costs, delays in acceptance of and payment for new products, and additional service and warranty expenses. We may be unable to develop and manufacture products successfully, or products that we introduce may fail in the marketplace. For more than 25 years, the primary driver of technology advancement in the semiconductor industry has been to shrink the lithography that prints the circuit design on semiconductor chips. That driver could be approaching its technological limit, leading semiconductor manufacturers to investigate more complex changes in multiple technologies in an effort to continue technology development. In addition, the emergence of “big data” and new tools such as machine learning and artificial intelligence (“AI”) that capitalize on the availability of large data sets is leading semiconductor manufacturers and equipment manufacturers to pursue new products and approaches that exploit those tools to advance technology development. In the face of uncertainty on which technology solutions will become successful, we will need to focus our efforts on developing the technology changes that are ultimately successful in supporting our customers’ requirements. Our failure to develop and offer the correct technology solutions in a timely manner with productive and cost-effective products could adversely affect our business in a material way. Our failure to commercialize new products in a timely manner could result in loss of market share, unanticipated costs, and inventory obsolescence, which would adversely affect our financial results.

Current wording

Rapid technological changes in semiconductor manufacturing processes subject us to increased pressure to develop technological advances that enable those processes. We believe that our future success depends in part upon our ability to develop and offer new products with improved capabilities and to continue to enhance our existing products. If new products or existing products have reliability, quality, design, or safety problems, our performance may be impacted by reduced orders, higher manufacturing costs, delays in acceptance of and payment for new products, additional service and warranty expenses, and loss of market share. If we are unable to develop and manufacture products successfully, or the products that we introduce fail in the marketplace, our business, results of operations and financial condition could be materially and adversely affected. For more than 25 years, the primary driver of technology advancement in the semiconductor industry has been to shrink the lithography that prints the circuit design on semiconductor chips. That driver could be approaching its technological limit, leading semiconductor manufacturers to investigate more complex changes in multiple technologies in an effort to continue technology development. In addition, the emergence of “big data” and new tools such as machine learning and AI that capitalize on the availability of large data sets is leading semiconductor manufacturers and equipment manufacturers to pursue new products and approaches that exploit those tools to advance technology development. In the face of uncertainty on which technology solutions will become successful, we will need to focus our efforts on developing the technology changes that are ultimately successful in supporting our customers’ requirements. Our failure to develop and offer the correct technology solutions in a timely manner with productive and cost-effective products could adversely affect our business in a material way. Our failure to commercialize new products in a timely manner could result in loss of market share, unanticipated costs, and inventory obsolescence, which would adversely affect our financial results.

Previous wording

We face significant competition from multiple competitors, and our competitors may be able to develop products comparable or superior to those we offer or may adapt more quickly to new technologies or evolving customer requirements. In particular, while we continue to develop product enhancements that we believe will address future customer requirements, we may fail in a timely manner to identify those future customer requirements, to devote appropriate resources to developing products to address those requirements, or to complete the development or introduction of these additional product enhancements successfully, or these product enhancements may not achieve market acceptance or be competitive. Accordingly, competition may intensify, and we may be

Current wording

We face significant competition from multiple competitors, and our competitors may be able to develop products comparable or superior to those we offer or may adapt more quickly to new technologies or evolving customer requirements. In particular, while we continue to develop product enhancements that we believe will address future customer requirements, we may fail in a timely manner to identify those future customer requirements, to devote appropriate resources to developing products to address those requirements, or to complete the development or introduction of these additional product enhancements successfully, or these product enhancements may not achieve market acceptance or be competitive. Accordingly, competition may intensify, and we may be unable to continue to compete successfully in our markets, which could have a material adverse effect on our revenues, operating results, financial condition, and/or cash flows.

Previous wording

With increased consolidation efforts in our industry, as well as the emergence and strengthening of new, regional competitors, we may face increasing competitive pressures. Other companies continue to develop systems and/or acquire businesses and products that are competitive to ours and may introduce new products and product capabilities that may affect our ability to sell and support our existing products. We face a greater risk if our competitors enter into strategic relationships with leading semiconductor manufacturers covering products similar to those we sell or may develop, as this could adversely affect our ability to sell products to those manufacturers.

Current wording

With increased consolidation efforts in our industry, as well as the emergence and strengthening of new, regional competitors and the potentially disruptive impact of AI, we may face increasing competitive pressures. Other companies continue to develop systems and/or acquire businesses and products that are competitive to ours and may introduce new products and product capabilities that may affect our ability to sell and support our existing products. We face a greater risk if our competitors enter into strategic relationships with leading semiconductor manufacturers covering products similar to those we sell or may develop, as this could adversely affect our ability to sell products to those manufacturers.

Previous wording

The semiconductor capital equipment industry has historically been characterized by rapid changes in demand. Variability in our customers’ business plans may lead to changes in demand for our equipment and services, which could negatively impact our results. The variability in our customers’ investments during any particular period is dependent on several factors, including, but not limited to, electronics demand, economic conditions (both general and in the semiconductor and electronics industries), industry supply and demand, prices for semiconductors, and our customers’ ability to develop and manufacture increasingly complex and costly semiconductor devices. The changes in demand may require our management to adjust spending and other resources allocated to operating activities, which can be made more challenging due to the multi-year nature of investments made in certain technology programs and other initiatives.

Current wording

The semiconductor capital equipment industry has historically been characterized by rapid changes in demand. Variability in our customers’ business plans may lead to changes in demand for our equipment and services, which could negatively impact our results of operations and cash flows. The variability in our customers’ investments during any particular period is dependent on several factors, including, but not limited to, electronics demand, economic conditions (both general and in the semiconductor and electronics industries), industry supply and demand, prices for semiconductors, and our customers’ ability to develop and manufacture increasingly complex and costly semiconductor devices. The changes in demand may require our management to adjust spending and other resources allocated to operating activities, which can be made more challenging due to the multi-year nature of investments made in certain technology programs and other initiatives.

Previous wording

We continuously reassess our strategic resource allocation choices in response to the changing business environment. If we do not adequately adapt to the changing business environment, we may lack the infrastructure and resources to scale up our business to meet customer expectations and compete successfully during a period of growth, or we may expand our capacity and resources too rapidly and/or beyond what is appropriate for the actual demand environment, resulting in excess fixed costs.

Current wording

We regularly assess our strategic resource allocation choices in response to the changing business environment. If we do not adequately adapt to the changing business environment, we may lack the infrastructure and resources to scale up our business to

Previous wording

Fluctuating levels of investment by semiconductor manufacturers may materially affect our aggregate shipments, revenues, operating results, and earnings. Where appropriate, we will attempt to respond to these fluctuations with cost management programs aimed at aligning our expenditures with anticipated revenue streams, which sometimes result in restructuring charges. Even during periods of reduced revenues, we must continue to invest in R&D and maintain extensive ongoing worldwide customer service and support capabilities to remain competitive, which may temporarily harm our profitability and other financial results.

Current wording

Fluctuating levels of investment by semiconductor manufacturers may materially affect our aggregate shipments, revenues, operating results, and earnings. Where appropriate, we will attempt to respond to these fluctuations with cost management programs aimed at aligning our expenditures with anticipated revenue streams, which sometimes result in restructuring charges. Even during periods of reduced revenues, we must continue to invest in R&D and maintain extensive ongoing worldwide customer service and support capabilities to remain competitive, which may harm our profitability and other financial results.

Previous wording

Lam Research Corporation 2025 Q3 10-Q 28 vulnerabilities and to implement increasingly sophisticated cybersecurity attacks. Further, the use of AI by us, our customers, suppliers, and third-party providers, among others, may also introduce unique vulnerabilities whose existence or exploitation could have a material adverse effect on our business or operations.

Current wording

Lam Research Corporation 2026 Q3 10-Q 28

Previous wording

Lam Research Corporation 2025 Q3 10-Q 27 operating expenses are based in part on anticipated future revenues, and a certain amount of those expenses are relatively fixed, a change in the timing of recognition of revenue and/or the level of gross profit from a small number of transactions can unfavorably affect operating results in a particular quarter or year. Factors that may cause our financial results to fluctuate unpredictably include, but are not limited to:

Current wording

Our revenues and operating results may fluctuate significantly from quarter to quarter or year to year due to a number of factors, not all of which are in our control. We manage our expense levels based in part on our expectations of future revenues. Because our operating expenses are based in part on anticipated future revenues, and a certain amount of those expenses are relatively fixed, a change in the timing of recognition of revenue and/or the level of gross profit from a small number of transactions can unfavorably affect operating results in a particular quarter or year. Factors that may cause our financial results to fluctuate unpredictably include, but are not limited to:

Previous wording

•transportation, communication, demand, information technology, or supply disruptions based on factors outside our control, such as strikes, acts of God, wars, terrorist activities, international conflict, widespread outbreak of illness, or natural or man-made disasters (including disasters resulting from climate change), including earthquakes, wildfires, hurricanes, flooding, and heat waves;

Current wording

•transportation, communication, demand, information technology, or supply disruptions based on factors outside our control, such as strikes, acts of God, wars, terrorist activities, international conflict, epidemics, pandemics, outbreaks of diseases or other global health emergencies, or natural or man-made disasters (including disasters resulting from climate change), including earthquakes, wildfires, hurricanes, flooding, and heat waves;

Previous wording

The technology, data, intellectual property and other sensitive information we seek to protect are subject to loss, release, misappropriation or misuse, and the information systems containing or transmitting such technology, data, intellectual property and other sensitive information are subject to disruption, breach or failure, in each case as a result of various possible causes, any of which could have a material adverse effect on our business or operations. Such causes may include mistakes or unauthorized actions by our employees or contractors, phishing schemes and other third-party attacks, and degradation or loss of service or access to data due to viruses, malware, denial of service attacks, destructive or inadequate code, power failures, or physical damage to computers, hard drives, communication lines, or networking equipment, in each case with respect to us or the third-party product and service providers upon which we rely. Such causes may also include the use of techniques that change frequently or may be disguised or difficult to detect, or designed to remain dormant until a triggering event, or that may continue undetected for an extended period of time. In addition, to the extent AI capabilities improve and are increasingly adopted, they may be used to identify

Current wording

Lam Research Corporation 2026 Q3 10-Q 29 which could have a material adverse effect on our business or operations. Such causes may include mistakes or unauthorized actions by our employees or contractors, phishing schemes and other third-party attacks, and degradation or loss of service or access to data due to viruses, malware, denial of service attacks, destructive or inadequate code, power failures, or physical damage to computers, hard drives, communication lines, or networking equipment, in each case with respect to us or the third-party product and service providers upon which we rely. Such causes may also include the use of techniques that change frequently or may be disguised or difficult to detect, or designed to remain dormant until a triggering event, or that may continue undetected for an extended period of time. In addition, to the extent AI capabilities improve and are increasingly adopted, they may be used to identify vulnerabilities and to implement increasingly sophisticated cybersecurity attacks. Further, the use of AI by us, our customers, suppliers, and third-party providers, among others, may also introduce unique vulnerabilities whose existence or exploitation could have a material adverse effect on our business or operations.

Previous wording

Non-U.S. sales, as reflected in Part I Item 2. Results of Operations of this quarterly report on Form 10-Q, accounted for approximately 95%, 93%, and 93% of total revenue in the six months ended December 28, 2025 and fiscal years 2025, and 2024, respectively. We expect that international sales will continue to account for a substantial majority of our total revenue in future years.

Current wording

Non-U.S. sales, as reflected in Part I Item 2. Results of Operations of this quarterly report on Form 10-Q, accounted for approximately 94%, 93%, and 93% of total revenue in the nine months ended March 29, 2026 and fiscal years 2025, and 2024, respectively. We expect that international sales will continue to account for a substantial majority of our total revenue in future years.

Previous wording

Lam Research Corporation 2025 Q3 10-Q 30 finance organization. These providers and suppliers might suffer financial setbacks, be acquired by third parties, become subject to exclusivity arrangements that preclude further business with us, or be unable to meet our requirements or expectation due to their independent business decisions or force majeure events that could interrupt or impair their continued ability to perform as we expect. We may also experience significant interruptions of our manufacturing operations, delays in our ability to deliver or install products or perform services or to recognize revenue, increased costs or customer order cancellations as a result of:

Current wording

Lam Research Corporation 2026 Q3 10-Q 30

Previous wording

There is inherent risk, based on the complex relationships among the world’s major trading nations, that political, diplomatic and national security influences can lead to trade disputes, impacts and/or disruptions, in particular those affecting the semiconductor industry. This can adversely affect our business with China, Japan, Korea, and/or Taiwan and perhaps the entire Asia Pacific region or global economy. A significant trade dispute, impact, and/or disruption in any area where we do business could have a materially adverse impact on our future revenue and profits.

Current wording

There is inherent risk that political, diplomatic and national security influences can lead to trade disputes, impacts and/or disruptions, in particular those affecting the semiconductor industry. This can adversely affect our business with China, Japan, Korea, and/or Taiwan and perhaps the entire Asia Pacific region or global economy. A significant trade dispute, impact, and/or disruption in any area where we do business could have a materially adverse impact on our future results of operations and cash flows. For example, the conflict that began in February 2026 between the United States, Israel, a number of states in the Persian Gulf, and Iran has led to significant regional instability and disruption in the Middle East, including the closure of or restrictions on the Strait of Hormuz and attacks on transportation and energy infrastructure, which has significantly and adversely affected the supply and prices of oil, refined oil products and byproducts, liquid natural gas, as well as certain other industrial commodities, such as aluminum, helium, bromine, and sulfur. Some of these commodities are important to the semiconductor industry. As a result, this instability and disruption has adversely affected, and may in the future materially and adversely affect, our business, results of operations, and financial condition. The extent to which we may be affected by this conflict will depend on various factors, including the scope, severity, and duration of the conflict and the extent to which the conflict, or additional laws, sanctions, or trade restrictions arising from or related to the conflict, further disrupt the availability or cost of critical inputs used in the semiconductor industry. Continuation or escalation of this conflict may also magnify the impact of other risks identified in this quarterly report on Form 10-Q.

Previous wording

Tariffs, export controls, additional taxes, trade barriers, sanctions, the termination or modification of trade agreements, trade zones, and other duty mitigation initiatives, and any reciprocal retaliatory actions, can increase our manufacturing costs, decrease margins, reduce the competitiveness of our products, disrupt our supply chain operations, or inhibit our ability to sell products or provide services, which has had and in the future could have a material adverse effect on our business, results of operations, or financial conditions. Certain of our international sales depend on our ability to obtain export licenses from the U.S. or foreign governments. Our inability to obtain such licenses, or an expansion of the number or kinds of sales for which export licenses are required, has limited and could in the future further limit the market for our products and has had and could in the future have an adverse impact on our revenues. As is discussed below under the heading “Our Sales to Customers in China, a Significant Region for Us, Have Been Impacted, and are Likely to Be Materially and Adversely Affected by Export License Requirements and Other Regulatory Changes, or Other Governmental Actions in the Course of the Trade Relationship Between the U.S. and China,” the U.S. government has in recent years imposed new controls, including expanded export license requirements and restrictions on sales to certain Chinese entities that significantly impact trade with China. In addition, the U.S. government has an ongoing process of assessing technologies that may be subject to new or additional export controls, and it is possible that such additional controls, if and when imposed, could further adversely impact our ability to sell our products outside the U.S. The implementation by the U.S. government of broad export controls restricting access to our technology (such as recent controls limiting exports to China) may cause customers with international operations to reconsider their use of and reliance on our products, which could adversely impact our future revenue and profits and strengthen competitors who are not subject to such restrictions. Furthermore, there are risks that foreign governments may, among other things, take retaliatory actions; insist on the use of local suppliers; compel companies to partner with local companies to design and supply equipment on a local basis, requiring the transfer of intellectual property rights and/or local manufacturing; utilize their influence over their judicial systems to respond to intellectual property disputes or issues; and provide special incentives to government-backed local customers to buy from local competitors, even if their products are inferior to ours; all of which could adversely impact our ability to compete as well as our revenues and margins. For example, recently the Chinese government has implemented (and then suspended) export controls applicable to certain products containing Chinese-o…

Excerpt shortened here; the source contains the full paragraph.

Current wording

Tariffs, export controls, additional taxes, trade barriers, sanctions, the termination or modification of trade agreements, trade zones, and other duty mitigation initiatives, and any reciprocal retaliatory actions, can increase our manufacturing costs, decrease margins, reduce the competitiveness of our products, disrupt our supply chain operations, or inhibit our ability to sell products or provide services, which has had and in the future could have a material adverse effect on our business, results of operations, or financial conditions. Certain of our international sales depend on our ability to obtain export licenses from the U.S. or foreign governments. Our inability to obtain such licenses, or an expansion of the number or kinds of sales for which export licenses are required, has limited and could in the future further limit the market for our products and has had and could in the future have an adverse impact on our revenues. As is discussed below under the heading “Our Sales to Customers in China, a Significant Region for Us, Have Been Impacted, and are Likely to Be Materially and Adversely Affected by Export License Requirements and Other Regulatory Changes, or Other Governmental Actions in the Course of the Trade Relationship Between the U.S. and China,” the U.S. government has in recent years imposed new controls, including expanded export license requirements and restrictions on sales to certain Chinese entities that significantly impact trade with China. In addition, the U.S. government has an ongoing process of assessing technologies that may be subject to new or additional export controls, and it is possible that such additional controls, if and when imposed, could further adversely impact our ability to sell our products outside the U.S. The implementation by the U.S. government of broad export controls restricting access to our technology (such as recent controls limiting exports to China) may cause customers with international operations to reconsider their use of and reliance on our products, which could adversely impact our future revenue and profits and strengthen competitors who are not subject to such restrictions. Furthermore, there are risks that foreign governments may, among other things, take retaliatory actions; insist on the use of local suppliers; compel companies to partner with local companies to design and supply equipment on a local basis, requiring the transfer of intellectual property rights and/or local manufacturing; utilize their influence over their judicial systems to respond to intellectual property disputes or issues; and provide special incentives to government-backed local customers to buy from local competitors, even if their products are inferior to ours; all of which could adversely impact our ability to compete as well as our revenues and margins. For example, China is the primary source of supply of certain rare earth elements critical to the manufacture of certain of our products. The Chinese…

Excerpt shortened here; the source contains the full paragraph.

Previous wording

We are exposed to potentially adverse movements in foreign currency exchange rates. The majority of our sales and expenses are denominated in U.S. dollars. However, we are exposed to foreign currency exchange rate fluctuations primarily related to revenues denominated in Japanese yen and expenses denominated in euro, Korean won, Malaysian ringgit, and Indian rupee. Currently, we hedge certain anticipated foreign currency cash flows, primarily anticipated revenues denominated in Japanese yen and expenses denominated in euro, Korean won, Malaysian ringgit, and Indian rupee. In addition, we enter into foreign currency hedge contracts to minimize the short-term impact of the foreign currency exchange rate fluctuations on certain foreign currency denominated monetary assets and liabilities, primarily third-party accounts receivables, accounts payables, and intercompany receivables and payables. We believe these are our primary exposures to currency rate fluctuation. We expect to continue to enter into hedging transactions, for the purposes outlined, for the foreseeable future. However, these hedging transactions may not achieve their desired effect because differences between the actual timing of the underlying exposures and our forecasts of those exposures may leave us either over or under hedged on any given transaction. Moreover, by hedging these foreign currency denominated revenues, expenses, monetary assets, and liabilities, we may miss favorable currency trends that would have been advantageous to us but for the hedges. Additionally, we are exposed to short-term foreign currency exchange rate fluctuations on non-U.S. dollar-denominated monetary assets and liabilities (other than those currency exposures previously discussed), and currently we do not enter into foreign currency hedge contracts against these exposures. Therefore, we are subject to potential unfavorable foreign currency exchange rate fluctuations to the extent that we transact business (including intercompany transactions) in these currencies.

Current wording

We are exposed to potentially adverse movements in foreign currency exchange rates. The majority of our sales and expenses are denominated in U.S. dollars. However, we are exposed to foreign currency exchange rate fluctuations primarily related to revenues denominated in Japanese yen and expenses denominated in euro, Korean won, Malaysian ringgit, and Indian rupee. Currently, we hedge certain anticipated foreign currency cash flows, primarily anticipated revenues denominated in Japanese yen and expenses denominated in euro, Korean won, Malaysian ringgit, and Indian rupee. In addition, we enter into foreign currency hedge contracts to minimize the short-term impact of the foreign currency exchange rate fluctuations on certain foreign currency denominated monetary assets and liabilities, primarily third-party accounts receivables, accounts payables, and intercompany receivables and payables. We believe these are our primary exposures to currency rate fluctuation. We expect to continue to enter into hedging transactions, for the

Previous wording

Our supply chain has played and will continue to play a key role in our product development, manufacturing operations, field installation and support. Our business depends on our timely supply of products and services to meet the demand from our customers, which depends in significant part on the timely delivery of parts, materials and services, including components and subassemblies, from our direct suppliers to us, and to our direct suppliers by other companies. In addition, outsource providers have played and will continue to play a key role both in the manufacturing and customer-focused operations described above, and in many of our transactional and administrative functions, such as information technology, facilities management, and certain elements of our

Current wording

Our supply chain has played and will continue to play a key role in our product development, manufacturing operations, field installation and support. Our business depends on our timely supply of products and services to meet the demand from our customers, which depends in significant part on the timely delivery of parts, materials and services, including components and subassemblies, from our direct suppliers to us, and to our direct suppliers by other companies. In addition, outsource providers have played and will continue to play a key role both in the manufacturing and customer-focused operations described above, and in many of our transactional and administrative functions, such as information technology, facilities management, and certain elements of our finance organization. These providers and suppliers might suffer financial setbacks, be acquired by third parties that restrict or preclude further business with us, become subject to exclusivity arrangements that preclude further business with us, or be unable to meet our requirements or expectation due to their independent business decisions or force majeure events that could interrupt or impair their continued ability to perform as we expect. We may also experience significant interruptions of our manufacturing operations, delays in our ability to deliver or install products or perform services or to recognize revenue, increased costs or customer order cancellations as a result of:

Previous wording

Although we attempt to select reputable providers and suppliers and we attempt to secure their performance on terms documented in written contracts, it is possible that one or more of these providers or suppliers could fail to perform as we expect, or fail to secure or protect intellectual property rights, and such failure could have an adverse impact on our business. In some cases, the requirements of our business mandate that we obtain certain components and sub-assemblies included in our products from a single supplier or a limited group of suppliers. Where practical, we endeavor to establish alternative sources to mitigate the risk that the failure of any single provider or supplier will adversely affect our business, but this is not feasible in all circumstances. Some key parts are subject to long lead-times or available only from a single supplier or limited group of suppliers, and some sourcing or subassembly is provided by suppliers located in countries other than the countries where we conduct our manufacturing. There is therefore a risk that a prolonged inability to obtain certain components or secure key services could impair our ability to manage operations, ship products, and generate revenues, which could adversely affect our operating results and damage our customer relationships.

Current wording

Lam Research Corporation 2026 Q3 10-Q 32 protect intellectual property rights, and such failure could have an adverse impact on our business. In some cases, the requirements of our business mandate that we obtain certain components and sub-assemblies included in our products from a single supplier or a limited group of suppliers. Where practical, we endeavor to establish alternative sources to mitigate the risk that the failure of any single provider or supplier will adversely affect our business, but this is not feasible in all circumstances. Some key parts are subject to long lead-times or available only from a single supplier or limited group of suppliers, and some sourcing or subassembly is provided by suppliers located in countries other than the countries where we conduct our manufacturing. There is therefore a risk that a prolonged inability to obtain certain components or secure key services could impair our ability to manage operations, ship products, and generate revenues, which could adversely affect our operating results and damage our customer relationships.

Previous wording

We have in the past undertaken, and may in the future undertake, business restructuring, realignment and transformation plans or initiatives. While such plans or initiatives would generally have the goal of strengthening our operations and/or achieving operational efficiencies, there can be no assurance that we will be successful in these plans and initiatives. Implementation of such plans and initiatives may be costly and disruptive to our business, we may not be able to complete them at the cost or within the time frame contemplated, and we may not be able to obtain the anticipated benefits within the projected timing or at all. Restructuring and transformation may adversely affect our internal programs and our ability to recruit and retain skilled and motivated personnel, may result in a loss of continuity, loss of accumulated knowledge and/or inefficiency during transitional periods, may require a significant amount of management and other employees' time and focus, and may be distracting to employees and management, which may divert attention from operating and growing our business. Additionally, reductions in our workforce may cause a reduction in our production output capabilities which could impact our ability to manufacture or ship products to customers within a mutually beneficial

Current wording

We have in the past undertaken, and may in the future undertake, business restructuring, realignment and transformation plans or initiatives. While such plans or initiatives would generally have the goal of strengthening our operations and/or achieving operational efficiencies, there can be no assurance that we will be successful in these plans and initiatives. Implementation of such plans and initiatives may be costly and disruptive to our business, we may not be able to complete them at the cost or within the time frame contemplated, and we may not be able to obtain the anticipated benefits within the projected timing or at all. Restructuring and transformation may adversely affect our internal programs and our ability to recruit and retain skilled and motivated personnel, may result in a loss of continuity, loss of accumulated knowledge and/or inefficiency during transitional periods, may require a significant amount of management and other employees' time and focus, and may be distracting to employees and management, which may divert attention from operating and growing our business. Additionally, reductions in our workforce may cause a reduction in our production output capabilities which could impact our ability to manufacture or ship products to customers within a mutually beneficial timeline. If we fail to achieve some or all of the expected benefits, it could have a material adverse effect on our business, operations, financial condition, results of operations and competitive position.

Previous wording

While we maintain business continuity plans, our manufacturing and R&D facilities are concentrated in a limited number of locations. These locations are subject to disruption for a variety of reasons, such as natural or man-made disasters (including disasters resulting from climate change), including earthquakes, wildfires, hurricanes, flooding, and heat waves, widespread outbreaks of illness, war, terrorist activities, political or governmental unrest or instability, disruptions of our information technology resources, utility interruptions, international conflict, or other events beyond our control. Such disruptions may cause delays in developing or shipping our products, in engaging with customers on new product applications, or in supporting customers, which could result in the loss of business or customer trust, adversely affecting our business and operating results.

Current wording

While we maintain business continuity plans, our manufacturing and R&D facilities are concentrated in a limited number of locations. These locations are subject to disruption for a variety of reasons, such as natural or man-made disasters (including disasters resulting from climate change), including earthquakes, wildfires, hurricanes, flooding, and heat waves, epidemics, pandemics, outbreaks of diseases or other global health emergencies, war, terrorist activities, political or governmental unrest or instability, disruptions of our information technology resources, utility interruptions, international conflict, or other events beyond our control. Such disruptions may cause delays in developing or shipping our products, in engaging with customers on new product applications, or in supporting customers, which could result in the loss of business or customer trust, adversely affecting our business and operating results.

Previous wording

Our ability to compete successfully depends in large part on our ability to attract, retain, and motivate key employees with the appropriate skills, experiences and competencies. This has been and may continue to be an ongoing challenge due to intense competition for top talent, fluctuations in industry or business economic conditions, as well as increasing geographic expansion, and these factors in combination may result in cycles of hiring activity and workforce reductions. Our success in hiring depends on a variety of factors, including the attractiveness of our compensation and benefit programs, global economic or political and industry conditions, our organizational structure, global competition for talent and the availability of qualified employees, the availability of career development opportunities, the ability to obtain necessary authorizations for workers to provide services outside their home countries, and our ability to offer a challenging and rewarding work environment. We periodically evaluate our overall compensation and benefit programs and make adjustments, as appropriate, to maintain or enhance their competitiveness. If we are not able to successfully attract, retain, and motivate key employees, we may be unable to capitalize on market opportunities and our operating results may be materially and adversely affected.

Current wording

Our ability to compete successfully depends in large part on our ability to attract, retain, and motivate key employees with the appropriate skills, experiences and competencies. This has been and may continue to be an ongoing challenge due to intense competition for top talent, fluctuations in industry or business economic conditions, as well as increasing geographic expansion, and these factors in combination may result in cycles of hiring activity and workforce reductions. Our success in hiring depends on a variety of factors, including the attractiveness of our compensation and benefit programs, global economic or political and industry conditions, our organizational structure, global competition for talent and the availability of qualified employees, the availability of career development opportunities, the ability to obtain necessary authorizations for workers to provide services outside their home countries, and our ability to offer a challenging and rewarding work environment. If we are not able to successfully attract, retain, and motivate key employees, we may be unable to capitalize on market opportunities and our operating results may be materially and adversely affected.

Previous wording

China represents a large and fast-developing market for the semiconductor equipment industry and therefore is important to our business. Revenue in China, which includes global customers and domestic Chinese customers with manufacturing facilities in China, represented approximately 39%, 34%, and 42% of our total revenue for the six months ended December 28, 2025 and fiscal years 2025 and 2024, respectively. The U.S. and China have historically had a complex relationship that has included actions that have impacted trade between the two countries. In recent years, these actions have included an expansion of export license requirements imposed by the U.S. government, which have limited the market for our products, adversely impacted our revenues, and increased our exposure to foreign competition, and could potentially do so to an even greater extent in the future. Additionally, the U.S. government has enacted rules aimed at restricting China’s ability to manufacture advanced semiconductors, which include restrictions on exports, reexports or transfers to, or shipping, transmitting, transferring, or facilitating such movement to, or performing services at, customer facilities in China engaged in certain technology end-uses, without appropriate authorizations obtained from U.S. authorities. The U.S. Department of Commerce has also enacted rules that have expanded export license requirements for U.S. companies to sell certain items to companies and other end-users in China that are designated as military end-users or have operations that could support military end uses; has added additional Chinese companies to its restricted entity list and unverified list under suspicion of military-civil fusion, support of Russia, or other factors associated with a broadening scope of national security concerns; and has expanded an existing rule (referred to as the foreign direct product rule) in a manner that could cause foreign-made wafers, chipsets, and certain related items produced with many of our products to be subject to U.S. licensing requirements if Huawei Technologies Co. Ltd (“Huawei”) or its affiliates are parties to a transaction involving the items. These rules have required and may require us to apply for and obtain additional export licenses to supply certain of our products to customers in China, and there is no assurance that we will be issued licenses that we apply for on a timely basis or at all. In addition, our customers (including, but not limited to, Chinese customers) may require U.S. export licenses for the use of our products in order to manufacture products, including semiconductor wafers and integrated circuits, for those of their customers (i.e. Huawei and its affiliates) that are subject to the expanded foreign direct product rule, which may adversely impact the demand for our products. The U.S. Department of Commerce could in the future add additional Chinese companies to its restricted entity list or unverified list or take other …

Excerpt shortened here; the source contains the full paragraph.

Current wording

China represents a large and fast-developing market for the semiconductor equipment industry and therefore is important to our business. Revenue in China, which includes global customers and domestic Chinese customers with manufacturing facilities in China, represented approximately 37%, 34%, and 42% of our total revenue for the nine months ended March 29, 2026 and fiscal years 2025 and 2024, respectively. The U.S. and China have historically had a complex relationship that has included actions that have impacted trade between the two countries. In recent years, these actions have included an expansion of export license requirements imposed by the U.S. government, which have limited the market for our products, adversely impacted our revenues, and increased our exposure to foreign competition, and could potentially do so to an even greater extent in the future. Additionally, the U.S. government has enacted rules aimed at restricting China’s ability to manufacture advanced semiconductors, which include restrictions on exports, reexports or transfers to, or shipping, transmitting, transferring, or facilitating such movement to, or performing services at, customer facilities in China engaged in certain technology end-uses, without appropriate authorizations obtained from U.S. authorities. The U.S. Department of Commerce has also enacted rules that have expanded export license requirements for U.S. companies to sell certain items to companies and other end-users in China that are designated as military end-users or have operations that could support military end uses; has added additional Chinese companies to its restricted entity list and unverified list under suspicion of military-civil fusion, support of Russia, or other factors associated with a broadening scope of national security concerns; and has expanded an existing rule (referred to as the foreign direct product rule) in a manner that could cause foreign-made wafers, chipsets, and certain related items produced with many of our products to be subject to U.S. licensing requirements if Huawei Technologies Co. Ltd (“Huawei”) or its affiliates are parties to a transaction involving the items. These rules have required and may require us to apply for and obtain additional export licenses to supply certain of our products to customers in China, and there is no assurance that we will be issued licenses that we apply for on a timely basis or at all. In addition, our customers (including, but not limited to, Chinese customers) may require U.S. export licenses for the use of our products in order to manufacture products, including semiconductor wafers and integrated circuits, for those of their customers (i.e. Huawei and its affiliates) that are subject to the expanded foreign direct product rule, which may adversely impact the demand for our products. The U.S. Department of Commerce could in the future add additional Chinese companies to its restricted entity list or unverified list or take other ac…

Excerpt shortened here; the source contains the full paragraph.

Previous wording

Lam Research Corporation 2025 Q3 10-Q 34 and cover certain losses to our property, such insurance may not cover us for the full amount of any losses, or at all, and may be subject to substantial exclusions and deductibles.

Current wording

Lam Research Corporation 2026 Q3 10-Q 35 and cover certain losses to our property, such insurance may not cover us for the full amount of any losses, or at all, and may be subject to substantial exclusions and deductibles.

Previous wording

Lam Research Corporation 2025 Q3 10-Q 35 inconsistent outcomes. However, the forum provision limits a stockholder’s ability to bring a claim in a judicial forum that it believes may be more favorable than Delaware, and this could discourage the filing of such lawsuits.

Current wording

Lam Research Corporation 2026 Q3 10-Q 36 inconsistent outcomes. However, the forum provision limits a stockholder’s ability to bring a claim in a judicial forum that it believes may be more favorable than Delaware, and this could discourage the filing of such lawsuits.

Previous wording

Our Leverage and Debt Service Obligations May Adversely Affect Our Financial Condition, Results of Operations, and Earnings per Share

Current wording

Our Leverage and Debt Service Obligations May Adversely Affect Our Financial Condition and Results of Operations

Previous wording

We have $4.5 billion in aggregate principal amount of senior unsecured notes outstanding (the “Senior Notes”). Additionally, we have funding available to us under our $1.5 billion commercial paper program and our $2.0 billion revolving credit facility, which serves as a backstop to our commercial paper program. Our revolving credit facility also includes an option to increase the amount up to an

Current wording

We have $3.75 billion in aggregate principal amount of senior unsecured notes outstanding (the “Senior Notes”). Additionally, we have funding available to us under our $2.00 billion commercial paper program and our $2.00 billion revolving credit facility, which serves as a backstop to our commercial paper program. Our revolving credit facility also includes an option to increase the amount up

Previous wording

Lam Research Corporation 2025 Q3 10-Q 36 additional $750.0 million, for a potential total commitment of $2.75 billion. We may, in the future, decide to enter into additional debt arrangements.

Current wording

Lam Research Corporation 2026 Q3 10-Q 37 to an additional $750.0 million, for a potential total commitment of $2.75 billion. We may, in the future, decide to enter into additional debt arrangements.

Previous wording

As part of our hedging activities, we enter into transactions involving derivative financial instruments, which may include forward contracts, option contracts, collars and swaps with various financial institutions. In addition, we have significant amounts of cash, cash equivalents and other investments on deposit or in accounts with banks or other financial institutions both in and out of the United States. As a result, we are exposed to the risk of default by or failure of counterparty financial institutions, which may be heightened during economic downturns and periods of uncertainty in the financial markets. If one of our counterparties were to become insolvent or file for bankruptcy, our ability to recover losses incurred as a result of default, or our assets deposited or held in accounts with such counterparty, may be limited by the counterparty's liquidity or the applicable laws governing the insolvency or bankruptcy proceedings. In the event of default or failure of one or more of our counterparties, we could incur significant losses, which could negatively impact our results of operations and financial condition.

Current wording

As part of our hedging activities, we enter into transactions involving derivative financial instruments, which may include forward contracts, option contracts, collars and swaps with various financial institutions. In addition, we have significant amounts of cash, cash equivalents and other investments on deposit or in accounts with banks or other financial institutions both in and outside of the United States. As a result, we are exposed to the risk of default by or failure of counterparty financial institutions, which may be heightened during economic downturns and periods of uncertainty or volatility in the financial markets. If one of our counterparties were to become insolvent or file for bankruptcy, our ability to recover losses incurred as a result of default, or our assets deposited or held in accounts with such counterparty, may be limited by the counterparty's liquidity or the applicable laws governing the insolvency or bankruptcy proceedings. In the event of default or failure of one or more of our counterparties, we could incur significant losses, which could negatively impact our results of operations, financial condition, and liquidity.

Previous wording

In May 2024, the Board of Directors authorized management to repurchase up to an additional $10.0 billion of Common Stock; this authorization supplements the remaining balance from any prior authorization. These repurchases can be conducted on the open market or as private purchases and may include the use of derivative contracts with large financial institutions, in all cases subject to compliance with applicable law. This repurchase program has no termination date and may be suspended or discontinued at any time.

Current wording

In May 2024, the Board of Directors authorized management to repurchase up to an additional $10.00 billion of Common Stock; this authorization supplements the remaining balance from any prior authorization. These repurchases can be conducted on the open market or as private purchases and may include the use of derivative contracts with large financial institutions, in all cases subject to compliance with applicable law. This repurchase program has no termination date and may be suspended or discontinued at any time.

Previous wording

On April 30, 2025, we entered into accelerated share repurchase agreements (the "April 2025 ASRs") with two financial institutions to repurchase a total of $500 million of Common Stock. We took an initial delivery of approximately 5.2 million shares, which represented 75% of the prepayment amount divided by our closing stock price on April 30, 2025. The total number of shares received under the April 2025 ASRs was based upon the average daily volume weighted average price of our Common Stock during the repurchase period, less an agreed upon discount. Final settlement of the April 2025 ASRs occurred in September 2025, resulting in the receipt of approximately 317 thousand additional shares, which yielded a weighted-average share price of $91.00 for the transaction period, including the effects of a 1% excise tax under the Inflation Reduction Act.

Current wording

On April 30, 2025, we entered into accelerated share repurchase agreements (the "April 2025 ASRs") with two financial institutions to repurchase a total of $500.0 million of Common Stock. We took an initial delivery of approximately 5.2 million shares, which represented 75% of the prepayment amount divided by our closing stock price on April 30, 2025. The total number of shares received under the April 2025 ASRs was based upon the average daily volume weighted average price of our Common Stock during the repurchase period, less an agreed upon discount. Final settlement of the April 2025 ASRs occurred in September 2025, resulting in the receipt of approximately 317 thousand additional shares, which yielded a weighted-average share price of $91.00 for the transaction period, including the effects of a 1% excise tax under the Inflation Reduction Act.

Previous wording

(3) Includes shares received at final settlement of accelerated share repurchase agreements; see additional disclosures above regarding our accelerated share repurchase activity during the fiscal year.

Current wording

(3) Includes shares received at initial or final settlement of accelerated share repurchase agreements; see additional disclosures above regarding our accelerated share repurchase activity during the fiscal year.