LAM RESEARCH CORP

Previous wording

Rapid technological changes in semiconductor manufacturing processes subject us to increased pressure to develop technological advances that enable those processes. We believe that our future success depends in part upon our ability to develop and offer new products with improved capabilities and to continue to enhance our existing products. If new products or existing products have reliability, quality, design, or safety problems, our performance may be impacted by reduced orders, higher manufacturing costs, delays in acceptance of and payment for new products, and additional service and warranty expenses. We may be unable to develop and manufacture products successfully, or products that we introduce may fail in the marketplace. For more than 25 years, the primary driver of technology advancement in the semiconductor industry has been to shrink the lithography that prints the circuit design on semiconductor chips. That driver could be approaching its technological limit, leading semiconductor manufacturers to investigate more complex changes in multiple technologies in an effort to continue technology development. In addition, the emergence of “big data” and new tools such as machine learning and artificial intelligence that capitalize on the availability of large data sets is leading semiconductor manufacturers and equipment manufacturers to pursue new products and approaches that exploit those tools to advance technology development. In the face of uncertainty on which technology solutions will become successful, we will need to focus our efforts on developing the technology changes that are ultimately successful in supporting our customers’ requirements. Our failure to develop and offer the correct technology solutions in a timely manner with productive and cost-effective products could adversely affect our business in a material way. Our failure to commercialize new products in a timely manner could result in loss of market share, unanticipated costs, and inventory obsolescence, which would adversely affect our financial results.

Current wording

Rapid technological changes in semiconductor manufacturing processes subject us to increased pressure to develop technological advances that enable those processes. We believe that our future success depends in part upon our ability to develop and offer new products with improved capabilities and to continue to enhance our existing products. If new products or existing products have reliability, quality, design, or safety problems, our performance may be impacted by reduced orders, higher manufacturing costs, delays in acceptance of and payment for new products, and additional service and warranty expenses. We may be unable to develop and manufacture products successfully, or products that we introduce may fail in the marketplace. For more than 25 years, the primary driver of technology advancement in the semiconductor industry has been to shrink the lithography that prints the circuit design on semiconductor chips. That driver could be approaching its technological limit, leading semiconductor manufacturers to investigate more complex changes in multiple technologies in an effort to continue technology development. In addition, the emergence of “big data” and new tools such as machine learning and artificial intelligence (“AI”) that capitalize on the availability of large data sets is leading semiconductor manufacturers and equipment manufacturers to pursue new products and approaches that exploit those tools to advance technology development. In the face of uncertainty on which technology solutions will become successful, we will need to focus our efforts on developing the technology changes that are ultimately successful in supporting our customers’ requirements. Our failure to develop and offer the correct technology solutions in a timely manner with productive and cost-effective products could adversely affect our business in a material way. Our failure to commercialize new products in a timely manner could result in loss of market share, unanticipated costs, and inventory obsolescence, which would adversely affect our financial results.

Previous wording

In order to develop new products and processes and enhance existing products and processes, we expect to continue to make significant investments in R&D, to investigate the acquisition of products and technologies, to invest in or acquire businesses or technologies, and to pursue joint development relationships with customers, suppliers, or other members of the industry. Our investments and acquisitions may not be as successful as we may expect, particularly in the event that we invest in or acquire product lines and technologies that are new to us. We may find that acquisitions are not available to us, for regulatory or other reasons, and that we must therefore limit ourselves to collaboration and joint venture development activities that do not have the same benefits as acquisitions. Pursuing development through collaboration and/or joint development activities rather than through an acquisition may pose substantial challenges for management, including those related to aligning business objectives; sharing confidential information, intellectual property and data; sharing value with third parties; and realizing synergies that might have been available in an acquisition but are not available through a joint development project. We must manage product transitions and joint development relationships successfully, as the introduction of new products could adversely affect our sales of existing products and certain jointly developed technologies may be subject to restrictions on our ability to share that technology, which could limit our market for products incorporating those technologies. Future technologies, processes, or product developments may render our

Current wording

In order to develop new products and processes and enhance existing products and processes, we expect to continue to make significant investments in R&D, to investigate the acquisition of products and technologies, to invest in or acquire businesses or technologies, and to pursue joint development relationships with customers, suppliers, or other members of the industry. Our investments and acquisitions may not be as successful as we may expect, particularly in the event that we invest in or acquire product lines and technologies that are new to us. We may find that acquisitions are not available to us, for regulatory or other reasons, and that we must therefore limit ourselves to collaboration and joint venture development activities that do not have the same benefits as acquisitions. Pursuing development through collaboration and/or joint development activities rather than through an acquisition may pose substantial challenges for management, including those related to aligning business objectives; sharing confidential information, intellectual property and data; sharing value with third parties; and realizing synergies that might have been available in an acquisition but are not available through a joint development project. We must manage product transitions and joint development relationships successfully, as the introduction of new products could adversely affect our sales of existing products and certain jointly developed technologies may be subject to restrictions on our ability to share that technology, which could limit our market for products incorporating those technologies. Future technologies, processes, or product developments may render our current product offerings obsolete, leaving us with non-competitive products, obsolete inventory, or both. Moreover, customers may adopt new technologies or processes to address the complex challenges associated with next-generation devices. This shift may result in a reduction in the size of our addressable markets or could increase the relative size of markets in which we either do not compete or have relatively low market share.

Previous wording

We believe that to remain competitive we must devote significant financial resources to offer products that meet our customers’ needs, to maintain customer service and support centers worldwide, and to invest in product and process R&D. Technological changes and developing technologies have required, and are expected to continue to require, new and costly investments. Certain of our competitors, including those that are created and financially backed by foreign governments, have substantially greater financial resources and more extensive engineering, manufacturing, marketing, and customer service and support resources than we do and therefore have the potential to offer customers a more comprehensive array of products and/or product capabilities and to therefore achieve additional relative success in the semiconductor equipment industry. These competitors may deeply discount or give away products similar to those that we sell, challenging or even exceeding our ability to make similar accommodations and threatening our ability to sell those products. We also face competition from our own customers, who in some instances have established affiliated entities that manufacture equipment similar to ours. In addition, we face competition from companies that exist in a more favorable legal or regulatory environment than we do, who are able to sell products for certain applications at certain customers that we are prohibited from selling to under applicable export controls, allowing the freedom of action in ways that we may be unable to match. In many cases speed to solution is necessary for customer satisfaction and our competitors may be better positioned to achieve these objectives. For these reasons, we may fail to continue to compete successfully worldwide.

Current wording

We believe that to remain competitive we must devote significant financial resources to offer products that meet our customers’ needs, to maintain customer service and support centers worldwide, and to invest in product and process R&D. Technological changes and developing technologies have required, and are expected to continue to require, new and costly investments. Certain of our competitors, including those that are created and financially backed by foreign governments, have substantially greater financial resources and more extensive engineering, manufacturing, marketing, and customer service and support resources than we do and therefore have the potential to offer customers a more comprehensive array of products and/or product capabilities and to therefore achieve additional relative success in the semiconductor equipment industry. These competitors may deeply discount or give away products similar to those that we sell, challenging or even exceeding our ability to make similar accommodations and threatening our ability to sell those products. We also face competition from our own customers, who in some instances have established affiliated entities that manufacture equipment similar to ours. In addition, we face competition from companies that exist in a more favorable legal or regulatory environment than we do, who are able to sell products for certain applications at certain customers that we are prohibited from selling to under applicable export controls, allowing the freedom of action in ways that we may be unable to match and potentially contributing to the strengthening of such companies’ ability to compete with us. In many cases, speed to solution is necessary for customer satisfaction and our competitors may be better positioned to achieve these objectives. For these reasons, we may fail to continue to compete successfully worldwide.

Previous wording

The semiconductor capital equipment industry has historically been characterized by rapid changes in demand. Variability in our customers’ business plans may lead to changes in demand for our equipment and services, which could negatively impact our results. The variability in our customers’ investments during any particular period is dependent on several factors, including, but not limited to, electronics demand, economic conditions (both general and in the semiconductor and electronics industries), industry supply and demand, prices for semiconductors, and our customers’ ability to develop and manufacture increasingly complex and costly semiconductor devices. The changes in demand may require our management to adjust spending and other resources allocated to operating activities.

Current wording

The semiconductor capital equipment industry has historically been characterized by rapid changes in demand. Variability in our customers’ business plans may lead to changes in demand for our equipment and services, which could negatively impact our results. The variability in our customers’ investments during any particular period is dependent on several factors, including, but not limited to, electronics demand, economic conditions (both general and in the semiconductor and electronics industries), industry supply and demand, prices for semiconductors, and our customers’ ability to develop and manufacture increasingly complex and costly semiconductor devices. The changes in demand may require our management to adjust spending and other resources allocated to operating activities, which can be made more challenging due to the multi-year nature of investments made in certain technology programs and other initiatives.

Previous wording

During periods of rapid growth or decline in demand for our products and services, we face significant challenges in maintaining adequate financial and business controls, management processes, information systems, and procedures for training, assimilating, and managing our workforce, and in appropriately sizing our supply chain infrastructure and facilities, work force, and other components of our business on a timely basis. If we do not adequately meet these challenges during periods of increasing or declining demand, our gross margins and earnings may be negatively impacted.

Current wording

During periods of rapid growth or decline in demand for our products and services, we may face significant challenges in maintaining adequate financial and business controls, management processes, information systems, and procedures for training, assimilating, and managing our workforce, and in appropriately sizing our supply chain infrastructure and facilities, work force, and other components of our business on a timely basis. If we do not adequately meet these challenges during periods of increasing or declining demand, our gross margins and earnings may be negatively impacted.

Previous wording

•a decline in demand for our products or services;

Current wording

•a decline in demand for our products and/or services;

Previous wording

Lam Research Corporation 2024 10-K 14 current product offerings obsolete, leaving us with non-competitive products, obsolete inventory, or both. Moreover, customers may adopt new technologies or processes to address the complex challenges associated with next-generation devices. This shift may result in a reduction in the size of our addressable markets or could increase the relative size of markets in which we either do not compete or have relatively low market share.

Current wording

Lam Research Corporation 2025 10-K 14

Previous wording

Semiconductor manufacturing companies from time to time enter into strategic alliances or consolidate with one another to expedite the development of processes and other manufacturing technologies and/or achieve economies of scale. The outcomes of such an alliance can be the definition of a particular tool set for a certain function and/or the standardization of a series of process steps that use a specific set of manufacturing equipment, while the outcomes of consolidation can lead to an overall reduction in the market for semiconductor manufacturing equipment as customers’ operations achieve economies of scale and/or increased purchasing power based on their higher volumes. In certain instances, this could work to our disadvantage if a competitor’s tools or equipment become the standard equipment for such functions or processes. Additional outcomes of such consolidation may include our customers re-evaluating their future supplier relationships to consider our competitors’ products and/or gaining additional influence over the pricing of products and the control of intellectual property or data.

Current wording

Semiconductor manufacturing companies from time to time enter into strategic alliances or consolidate with one another to expedite the development of processes and other manufacturing technologies and/or achieve economies of scale. The outcomes of such an alliance can be the definition of a particular tool set for a certain function and/or the standardization of a series of process steps that use a specific set of manufacturing equipment. In addition, the outcomes of consolidation can potentially lead to an overall reduction in the market for semiconductor manufacturing equipment as customers’ operations achieve economies of scale and/or increased purchasing power based on their higher volumes. In certain instances, this could work to our disadvantage if a competitor’s tools or equipment become the standard equipment for such functions or processes. Additional outcomes of such consolidation may include our customers re-evaluating their future supplier relationships to consider our competitors’ products and/or gaining additional influence over the pricing of products and the control of intellectual property or data.

Previous wording

•legal, tax, accounting, or regulatory changes (including, but not limited to, changes in import/export regulations and tariffs, such as regulations imposed by the U.S. government restricting exports to China) or changes in the interpretation or enforcement of existing requirements;

Current wording

•legal, tax, accounting, or regulatory changes (including, but not limited to, changes in import/export regulations and tariffs, such as regulations imposed by the U.S. government restricting exports to China, or potential additional tariffs on imports, and tariffs imposed by other countries) or changes in the interpretation or enforcement of existing requirements;

Previous wording

•macroeconomic, industry and market conditions, including those caused by the Russian invasion of Ukraine, conflict in the Middle East, bank failures; and geopolitical issues;

Current wording

•macroeconomic, industry and market conditions, including those caused by war, conflict in the Middle East, bank failures; uncertainty regarding economic and other policies and priorities; and geopolitical issues;

Previous wording

•transportation, communication, demand, information technology, or supply disruptions based on factors outside our control, such as strikes, acts of God, wars, terrorist activities, widespread outbreak of illness, natural or man-made disasters, international conflict, or climate change;

Current wording

•transportation, communication, demand, information technology, or supply disruptions based on factors outside our control, such as strikes, acts of God, wars, terrorist activities, international conflict, widespread outbreak of illness, or natural or man-made disasters (including disasters resulting from climate change), including earthquakes, wildfires, hurricanes, flooding, and heat waves;

Previous wording

•rising inflation or interest rates; and

Current wording

•effects of inflation or interest rates; and

Previous wording

The technology, data, intellectual property and other sensitive information we seek to protect are subject to loss, release, misappropriation or misuse, and the information systems containing or transmitting such technology, data, intellectual property and other sensitive information are subject to disruption, breach or failure, in each case as a result of various possible causes, any of which could have a material adverse effect on our business or operations. Such causes may include mistakes or unauthorized actions by our employees or contractors, phishing schemes and other third-party attacks, and degradation or loss of service or access to data due to viruses, malware, denial of service attacks, destructive or inadequate code, power failures, or physical damage to computers, hard drives, communication lines, or networking equipment, in each case with respect to us or the third-party product and service providers upon which we rely. Such causes may also include the use of techniques that change frequently or may be disguised or difficult to detect, or designed to remain dormant until a triggering event, or that may continue undetected for an extended period of time. In addition, to the extent artificial intelligence capabilities improve and are increasingly adopted, they may be used to identify vulnerabilities and to implement increasingly sophisticated cybersecurity attacks. Further, the use of artificial intelligence by us, our customers, suppliers, and third-party providers, among others, may also introduce unique vulnerabilities whose existence or exploitation could have a material adverse effect on our business or operations.

Current wording

The technology, data, intellectual property and other sensitive information we seek to protect are subject to loss, release, misappropriation or misuse, and the information systems containing or transmitting such technology, data, intellectual property and other sensitive information are subject to disruption, breach or failure, in each case as a result of various possible causes, any of which could have a material adverse effect on our business or operations. Such causes may include mistakes or unauthorized actions by our employees or contractors, phishing schemes and other third-party attacks, and degradation or loss of service or access to data due to viruses, malware, denial of service attacks, destructive or inadequate code, power failures, or physical damage to computers, hard drives, communication lines, or networking equipment, in each case with respect to us or the third-party product and service providers upon which we rely. Such causes may also include the use of techniques that change frequently or may be disguised or difficult to detect, or designed to remain dormant until a triggering event, or that may continue undetected for an extended period of time. In addition, to the extent AI capabilities improve and are increasingly adopted, they may be used to identify vulnerabilities and to implement increasingly sophisticated cybersecurity attacks. Further, the use of AI by us, our customers, suppliers, and third-party providers, among others, may also introduce unique vulnerabilities whose existence or exploitation could have a material adverse effect on our business or operations.

Previous wording

Non-U.S. sales, as reflected in Part II Item 7. Results of Operations of this 2024 Form 10-K, accounted for approximately 93%, 91%, and 92% of total revenue in fiscal years 2024, 2023, and 2022, respectively. We expect that international sales will continue to account for a substantial majority of our total revenue in future years.

Current wording

Non-U.S. sales, as reflected in Part II Item 7. Results of Operations of this 2025 Form 10-K, accounted for approximately 93%, 93%, and 91% of total revenue in fiscal years 2025, 2024, and 2023, respectively. We expect that international sales will continue to account for a substantial majority of our total revenue in future years.

Previous wording

Tariffs, export controls, additional taxes, trade barriers, sanctions, the termination or modification of trade agreements, trade zones, and other duty mitigation initiatives, and any reciprocal retaliatory actions, can increase our manufacturing costs, decrease margins, reduce the competitiveness of our products, disrupt our supply chain operations, or inhibit our ability to sell products or provide services, which has had and in the future could have a material adverse effect on our business, results of operations, or financial conditions. Certain of our international sales depend on our ability to obtain export licenses from the U.S. or foreign governments, and our inability to obtain such licenses, or an expansion of the number or kinds of sales for which export licenses are required, has limited and could in the future further limit the market for our products and has had and could in the future have an adverse impact on our revenues. As is discussed below under the heading “Our Sales to Customers in China, a Significant Region for Us, Have Been Impacted, and are Likely to Be Materially and Adversely Affected by Export License Requirements and Other Regulatory Changes, or Other Governmental Actions in the Course of the Trade Relationship Between the U.S. and China,” the U.S. government has in recent years imposed new controls, including expanded export license requirements and restrictions on sales to certain Chinese entities that significantly impact trade with China. In addition, the U.S. government has an ongoing process of assessing technologies that may be subject to new or additional export controls, and it is possible that such additional controls, if and when imposed, could further adversely impact our ability to sell our products outside the U.S. The implementation by the U.S. government of broad export controls restricting access to our technology (such as recent controls limiting exports to China) may cause customers with international operations to reconsider their use of and reliance on our products, which could adversely impact our future revenue and profits. Furthermore, there are risks that foreign governments may, among other things, take retaliatory actions; insist on the use of local suppliers; compel companies to partner with local companies to design and supply equipment on a local basis, requiring the transfer of intellectual property rights and/or local manufacturing; utilize their influence over their judicial systems to respond to intellectual property disputes or issues; and provide special incentives to government-backed local customers to buy from local competitors, even if their products are inferior to ours; all of which could adversely impact our revenues and margins.

Current wording

Tariffs, export controls, additional taxes, trade barriers, sanctions, the termination or modification of trade agreements, trade zones, and other duty mitigation initiatives, and any reciprocal retaliatory actions, can increase our manufacturing costs, decrease margins, reduce the competitiveness of our products, disrupt our supply chain operations, or inhibit our ability to sell products or provide services, which has had and in the future could have a material adverse effect on our business, results of operations, or financial conditions. Certain of our international sales depend on our ability to obtain export licenses from the U.S. or foreign governments, and our inability to obtain such licenses, or an expansion of the number or kinds of sales for which export licenses are required, has limited and could in the future further limit the market for our products and has had and could in the future have an adverse impact on our revenues. As is discussed below under the heading “Our Sales to Customers in China, a Significant Region for Us, Have Been Impacted, and are Likely to Be Materially and Adversely Affected by Export License Requirements and Other Regulatory Changes, or Other Governmental Actions in the Course of the Trade Relationship Between the U.S. and China,” the U.S. government has in recent years imposed new controls, including expanded export license requirements and restrictions on sales to certain Chinese entities that significantly impact trade with China. In addition, the U.S. government has an ongoing process of assessing technologies that may be subject to new or additional export controls, and it is possible that such additional controls, if and when imposed, could further adversely impact our ability to sell our products outside the U.S. The implementation by the U.S. government of broad export controls restricting access to our technology (such as recent controls limiting exports to China) may cause customers with international operations to reconsider their use of and reliance on our products, which could adversely impact our future revenue and profits and strengthen competitors who are not subject to such restrictions. Furthermore, there are risks that foreign governments may, among other things, take retaliatory actions; insist on the use of local suppliers; compel companies to partner with local companies to design and supply equipment on a local basis, requiring the transfer of intellectual property rights and/or local manufacturing; utilize their influence over their judicial systems to respond to intellectual property disputes or issues; and provide special incentives to government-backed local customers to buy from local competitors, even if their products are inferior to ours; all of which could adversely impact our ability to compete as well as our revenues and margins.

Previous wording

We are exposed to potentially adverse movements in foreign currency exchange rates. The majority of our sales and expenses are denominated in U.S. dollars. However, we are exposed to foreign currency exchange rate fluctuations primarily related to revenues denominated in Japanese yen and expenses denominated in euro, Korean won, Malaysian ringgit, and Indian rupee. Further, in periods in which the U.S. dollar is strong relative to the local currencies of our international customers, this can potentially reduce demand for our products, which may compound the adverse effect of foreign exchange translation on our revenue. Currently, we hedge certain anticipated foreign currency cash flows, primarily anticipated revenues denominated in Japanese yen and expenses denominated in euro, Korean won, Malaysian ringgit, and Indian rupee. In addition, we enter into foreign currency hedge contracts to minimize the short-term impact of the foreign currency exchange rate fluctuations on certain foreign currency denominated monetary assets and liabilities, primarily third-party accounts receivables, accounts payables, and intercompany receivables and payables. We believe these are our primary exposures to currency rate fluctuation. We expect to continue to enter into hedging transactions, for the purposes outlined, for the foreseeable future. However, these hedging transactions may not achieve their desired effect because differences between the actual timing of the underlying exposures and our forecasts of those exposures may leave us either over or under hedged on any given transaction. Moreover, by hedging these foreign currency denominated revenues, expenses, monetary

Current wording

We are exposed to potentially adverse movements in foreign currency exchange rates. The majority of our sales and expenses are denominated in U.S. dollars. However, we are exposed to foreign currency exchange rate fluctuations primarily related to revenues denominated in Japanese yen and expenses denominated in euro, Korean won, Malaysian ringgit, and Indian rupee. Currently, we hedge certain anticipated foreign currency cash flows, primarily anticipated revenues denominated in Japanese yen and expenses denominated in euro, Korean won, Malaysian ringgit, and Indian rupee. In addition, we enter into foreign currency hedge contracts to minimize the short-term impact of the foreign currency exchange rate fluctuations on certain foreign currency denominated monetary assets and liabilities, primarily third-party accounts receivables, accounts payables, and intercompany receivables and payables. We believe these are our primary exposures to currency rate fluctuation. We expect to continue to enter into hedging transactions, for the

Previous wording

Lam Research Corporation 2024 10-K 16 assets, and liabilities, we may miss favorable currency trends that would have been advantageous to us but for the hedges. Additionally, we are exposed to short-term foreign currency exchange rate fluctuations on non-U.S. dollar-denominated monetary assets and liabilities (other than those currency exposures previously discussed), and currently we do not enter into foreign currency hedge contracts against these exposures. In addition, our currency hedges do not necessarily mitigate the potential negative impact of a strong U.S. dollar on demand for our products. Therefore, we are subject to potential unfavorable foreign currency exchange rate fluctuations to the extent that we transact business (including intercompany transactions) in these currencies.

Current wording

Lam Research Corporation 2025 10-K 17 purposes outlined, for the foreseeable future. However, these hedging transactions may not achieve their desired effect because differences between the actual timing of the underlying exposures and our forecasts of those exposures may leave us either over or under hedged on any given transaction. Moreover, by hedging these foreign currency denominated revenues, expenses, monetary assets, and liabilities, we may miss favorable currency trends that would have been advantageous to us but for the hedges. Additionally, we are exposed to short-term foreign currency exchange rate fluctuations on non-U.S. dollar-denominated monetary assets and liabilities (other than those currency exposures previously discussed), and currently we do not enter into foreign currency hedge contracts against these exposures. Therefore, we are subject to potential unfavorable foreign currency exchange rate fluctuations to the extent that we transact business (including intercompany transactions) in these currencies.

Previous wording

•volatility in the availability and cost of parts, materials or services, including increased costs due to rising inflation or interest rates or other market conditions;

Current wording

•volatility in the availability and cost of parts, materials or services, including increased costs due to tariffs, rising inflation or interest rates or other market conditions;

Previous wording

•shortages of semiconductor or other components or materials as a result of increases in demand;

Current wording

•shortages of semiconductor or other components or materials as a result of increases in demand or decreases in supply, including as a result of export restrictions on particular parts or materials used by us or our direct or indirect suppliers;

Previous wording

•transportation or supply disruptions based on factors outside our control, such as strikes, acts of God, wars, terrorist activities, widespread outbreak of illness, natural or man-made disasters, international conflict, or climate change.

Current wording

•transportation or supply disruptions based on factors outside our control, such as strikes, acts of God, wars, terrorist activities, international conflict, widespread outbreak of illness, or natural or man-made disasters (including disasters resulting from climate change), including earthquakes, wildfires, hurricanes, flooding, and heat waves.

Previous wording

Demand for electronic products and other factors, such as the COVID-19 pandemic, have resulted in, and may in the future result in, a shortage of parts, materials and services needed to manufacture, deliver and install our products, as well as delays in and unpredictability of shipments due to transportation interruptions. Such shortages, delays and unpredictability have adversely impacted, and may in the future impact, our suppliers’ ability to meet our demand requirements. Difficulties in obtaining sufficient and timely supply of parts, materials or services, and delays in and unpredictability of shipments due to transportation interruptions, have adversely impacted, and may in the future adversely impact, our manufacturing operations and our ability to meet customer demand. In addition, difficulties in obtaining parts, materials or services necessary to deliver or install products or perform services have adversely impacted, and may in the future adversely impact, our ability to recognize revenue, our gross margins on the revenue we

Current wording

Demand for electronic products and other factors, have resulted in, and may in the future result in, a shortage of parts, materials and services needed to manufacture, deliver and install our products, as well as delays in and unpredictability of shipments due to transportation interruptions. Such shortages, delays and unpredictability have adversely impacted, and may in the future impact, our suppliers’ ability to meet our demand requirements. Difficulties in obtaining sufficient and timely supply of parts, materials or services, and delays in and unpredictability of shipments due to transportation interruptions, have adversely impacted, and may in the future adversely impact, our manufacturing operations and our ability to meet customer demand. In addition, difficulties in obtaining parts, materials or services necessary to deliver or install products or perform services have adversely impacted, and may in the future adversely impact, our ability to recognize revenue, our gross margins on the revenue we recognize, and our other operating results. Although we are endeavoring to pass along some of the impact of increased costs to our customers to counteract adverse impacts to our gross margins and other operating results, such measures could be unsuccessful, or could have the effect of reducing demand, which would adversely impact our revenue.

Previous wording

Although we attempt to select reputable providers and suppliers and we attempt to secure their performance on terms documented in written contracts, it is possible that one or more of these providers or suppliers could fail to perform as we expect, or fail to secure or protect intellectual property rights, and such failure could have an adverse impact on our business. In some cases, the requirements of our business mandate that we obtain certain components and sub-assemblies included in our products from a single supplier or a limited group of suppliers. Where practical, we endeavor to establish alternative sources to mitigate the risk that the failure of any single provider or supplier will adversely affect our business, but this is not feasible in all circumstances. Some key parts are subject to long lead-times or available only from a single supplier or limited group of suppliers, and some sourcing or subassembly is provided by suppliers located in countries other than the countries where we conduct our manufacturing. There is therefore a risk that a prolonged inability to obtain certain components or secure key services could impair our ability to manage operations, ship products, and generate revenues, which could adversely affect our operating results and damage our customer relationships.

Current wording

Lam Research Corporation 2025 10-K 18 of our business mandate that we obtain certain components and sub-assemblies included in our products from a single supplier or a limited group of suppliers. Where practical, we endeavor to establish alternative sources to mitigate the risk that the failure of any single provider or supplier will adversely affect our business, but this is not feasible in all circumstances. Some key parts are subject to long lead-times or available only from a single supplier or limited group of suppliers, and some sourcing or subassembly is provided by suppliers located in countries other than the countries where we conduct our manufacturing. There is therefore a risk that a prolonged inability to obtain certain components or secure key services could impair our ability to manage operations, ship products, and generate revenues, which could adversely affect our operating results and damage our customer relationships.

Previous wording

In January 2023, we announced that we were implementing a restructuring plan consisting of a workforce reduction, and that we anticipated undertaking, and may in the future undertake, additional business restructuring, realignment and transformation initiatives. While the restructuring plan was intended to better align our cost structure with the current economic environment and future business opportunities, and our anticipated transformation initiatives have the goal of strengthening our operations and achieving operational efficiencies, there can be no assurance that we will be successful in these plans and initiatives. Implementation of such plans and initiatives may be costly and disruptive to our business, we may not be able to complete them at the cost or within the time frame contemplated, and we may not be able to obtain the anticipated benefits within the projected timing or at all. Restructuring and transformation may adversely affect our internal programs and our ability to recruit and retain skilled and motivated personnel, may result in a loss of continuity, loss of accumulated knowledge and/or inefficiency during transitional periods, may require a significant amount of management and other employees' time and focus, and may be distracting to employees and management, which may divert attention from operating and growing our business. Additionally, reductions in our workforce may cause a reduction in our production output capabilities which could impact our ability to manufacture or ship products to customers within a mutually beneficial timeline. If we fail to achieve some or all of the expected benefits, it could have a material adverse effect on our business, operations, financial condition, results of operations and competitive position. For more information about our restructuring plan, see Note 21: Restructuring charges, net of our Consolidated Financial Statements in Part II, Item 8 of this 2024 Form 10-K.

Current wording

In January 2023, we announced that we were implementing a restructuring plan consisting of a workforce reduction, and that we anticipated undertaking, and may in the future undertake, additional business restructuring, realignment and transformation initiatives. While the restructuring plan was intended to better align our cost structure with the current economic environment and future business opportunities, and our anticipated transformation initiatives have the goal of strengthening our operations and achieving operational efficiencies, there can be no assurance that we will be successful in these plans and initiatives. Implementation of such plans and initiatives may be costly and disruptive to our business, we may not be able to complete them at the cost or within the time frame contemplated, and we may not be able to obtain the anticipated benefits within the projected timing or at all. Restructuring and transformation may adversely affect our internal programs and our ability to recruit and retain skilled and motivated personnel, may result in a loss of continuity, loss of accumulated knowledge and/or inefficiency during transitional periods, may require a significant amount of management and other employees' time and focus, and may be distracting to employees and management, which may divert attention from operating and growing our business. Additionally, reductions in our workforce may cause a reduction in our production output capabilities which could impact our ability to manufacture or ship products to customers within a mutually beneficial timeline. If we fail to achieve some or all of the expected benefits, it could have a material adverse effect on our business, operations, financial condition, results of operations and competitive position. For more information about our restructuring plan, see Note 20 to our Consolidated Financial Statements in Part II, Item 8 of this 2025 Form 10-K.

Previous wording

While we maintain business continuity plans, our manufacturing and R&D facilities are concentrated in a limited number of locations. These locations are subject to disruption for a variety of reasons, such as natural or man-made disasters, widespread outbreaks of illness, war, terrorist activities, political or governmental unrest or instability, disruptions of our information technology resources, utility interruptions, international conflict, the effects of climate change, or other events beyond our control. Such disruptions may cause delays in developing or shipping our products, in engaging with customers on new product applications, or in supporting customers, which could result in the loss of business or customer trust, adversely affecting our business and operating results.

Current wording

While we maintain business continuity plans, our manufacturing and R&D facilities are concentrated in a limited number of locations. These locations are subject to disruption for a variety of reasons, such as natural or man-made disasters (including disasters resulting from climate change), including earthquakes, wildfires, hurricanes, flooding, and heat waves, widespread outbreaks of illness, war, terrorist activities, political or governmental unrest or instability, disruptions of our information technology resources, utility interruptions, international conflict, or other events beyond our control. Such disruptions may cause delays in developing or shipping our products, in engaging with customers on new product applications, or in supporting customers, which could result in the loss of business or customer trust, adversely affecting our business and operating results.

Previous wording

The COVID-19 pandemic and efforts by national, state and local governments worldwide to control its spread resulted in measures aimed at containing the disease such as quarantines, travel bans, shutdowns, and shelter in place or “stay at home” orders, which collectively significantly restricted the movement of people and goods and the ability of businesses to operate. While the exceptional COVID-19 related challenges have mostly subsided, these restrictions and measures, incidents of confirmed or suspected infections within our workforce or those of our suppliers or other business partners, and our efforts to act in the best interests of our employees, customers, and suppliers, previously affected and in the future may affect our business and operations by, among other things, causing facility closures, production delays and capacity limitations; disrupting production by our supply chain; disrupting the transport of goods from our supply chain to us and from us to our customers; requiring modifications to our business processes; requiring the implementation of business continuity plans; requiring the development and qualification of alternative sources of supply; requiring the implementation of social distancing measures that impede manufacturing processes; disrupting business travel; disrupting our ability to staff our on-site manufacturing and research and development facilities; delaying capital expansion projects; and necessitating teleworking by portions of our workforce. These impacts caused and, in the future, may cause delays in product shipments and product development, increases in costs, and decreases in revenue, profitability and cash from operations, which caused and, in the future, may cause an adverse effect on our results of operations that may be material. The pandemic resulted at various times in significant disruption of global financial markets, increases in levels of unemployment, and economic uncertainty, which adversely impacted our business and may do so in the future, and may lead to significant negative impacts on customer spending, demand for our products, the ability of our customers to pay, our financial condition and the financial condition of our suppliers, and our access to external sources of financing to fund our operations and capital expenditures.

Current wording

Epidemics, pandemics or outbreaks of diseases may arise at any time and may have significant business, operational, and financial impacts. For example, the COVID-19 pandemic has in the past and additional global heath crises may in the future result in efforts by national, state and local governments worldwide to control the applicable disease’s spread. Such governmental efforts may result in measures aimed at containing the applicable disease such as quarantines, travel bans, shutdowns, and shelter in place or “stay at home” orders, which collectively have the potential to significantly restrict the ability of businesses to operate. In addition, restrictions resulting from global health crises and related measures aimed at containing the applicable disease, incidents of confirmed or suspected infections within our workforce or those of our suppliers or other business partners, and efforts to act in the best interests of our employees, customers, and suppliers, in connection with a pandemic or disease outbreak, may affect our business and operations by, among other things, causing facility closures, production delays and capacity limitations; disrupting production by our supply chain; disrupting the transport of goods from our supply chain to us and from us to our customers; requiring modifications to our business processes; requiring the implementation of business continuity plans; requiring the development and qualification of alternative sources of supply; requiring the implementation of social distancing measures that impede manufacturing processes; disrupting business travel; disrupting our ability to staff our on-site manufacturing and research and development facilities; delaying capital expansion projects; and necessitating teleworking by portions of our workforce. These impacts may cause delays in product shipments and product development, increases in costs, and decreases in revenue, profitability and cash from operations, which may cause an adverse effect on our results of operations that may be material. Global health crises may also have significant macroeconomic impacts, including, but not limited to, significant disruption of global financial markets, increases in levels of unemployment, and economic uncertainty. This may lead to significant negative impacts on customer spending, demand for our products, the ability of our customers to pay, our financial condition and the financial condition of our suppliers, and our access to external sources of financing to fund our operations and capital expenditures.

Previous wording

•technological changes that we are unable to address with our products; or

Current wording

•technological changes that we are unable to address with our products;

Previous wording

In addition, the fact that we offer limited product lines creates the risk that our customers may view us as less important to their business than our competitors that offer additional products and/or product capabilities, including new products that take advantage of “big data” or other new technologies such as machine learning and artificial intelligence. This may impact our ability to maintain or expand our business with certain customers. Such product concentration may also subject us to additional risks associated with technology changes. Our business is affected by our customers’ use of our products in certain steps in their wafer fabrication processes. Should technologies change so that the manufacture of semiconductors requires fewer steps using our products, this could have a larger impact on our business than it would on the business of our less concentrated competitors.

Current wording

In addition, the fact that we offer limited product lines creates the risk that our customers may view us as less important to their business than our competitors that offer additional products and/or product capabilities, including new products that take advantage of “big data” or other new technologies such as machine learning and AI. This may impact our ability to maintain or expand our business with certain customers. Such product concentration may also subject us to additional risks associated with technology changes. Our business is affected by our customers’ use of our products in certain steps in their wafer fabrication processes. Should technologies change so that the manufacture of semiconductors requires fewer steps using our products, this could have a larger impact on our business than it would on the business of our less concentrated competitors.

Previous wording

Our ability to compete successfully depends in large part on our ability to attract, retain, and motivate key employees with the appropriate skills, experiences and competencies. This is an ongoing challenge due to intense competition for top talent, fluctuations in industry or business economic conditions, as well as increasing geographic expansion, and these factors in combination may result in cycles of hiring activity and workforce reductions. Our success in hiring depends on a variety of factors, including the attractiveness of our compensation and benefit programs, global economic or political and industry conditions, our organizational structure, global competition for talent and the availability of qualified employees, the availability of career development opportunities, the ability to obtain necessary authorizations for workers to provide services outside their home countries, and our ability to offer a challenging and rewarding work environment. We periodically evaluate our overall compensation and benefit programs and make adjustments, as appropriate, to maintain or enhance their competitiveness. If we are not able to successfully attract, retain, and motivate key employees, we may be unable to capitalize on market opportunities and our operating results may be materially and adversely affected.

Current wording

Our ability to compete successfully depends in large part on our ability to attract, retain, and motivate key employees with the appropriate skills, experiences and competencies. This has been and may continue to be an ongoing challenge due to intense competition for top talent, fluctuations in industry or business economic conditions, as well as increasing geographic expansion, and these factors in combination may result in cycles of hiring activity and workforce reductions. Our success in hiring depends on a variety of factors, including the attractiveness of our compensation and benefit programs, global economic or political and industry conditions, our organizational structure, global competition for talent and the availability of qualified employees, the availability of career development opportunities, the ability to obtain necessary authorizations for workers to provide services outside their home countries, and our ability to offer a challenging and rewarding work environment. We periodically evaluate our overall compensation and benefit programs and make adjustments, as appropriate, to maintain or enhance their competitiveness. If we are not able to successfully attract, retain, and motivate key employees, we may be unable to capitalize on market opportunities and our operating results may be materially and adversely affected.

Previous wording

An important element of our management strategy is to review acquisition prospects that would complement our existing products, augment our market coverage and distribution ability, enhance our technological capabilities, or accomplish other strategic objectives. As a result, we may seek to make acquisitions of complementary companies, products, or technologies, or we may reduce or dispose of certain product lines or technologies that no longer fit our long-term strategies. For regulatory or other reasons, we may not be successful in our attempts to acquire or dispose of businesses, products, or technologies, resulting in significant financial costs, reduced or lost opportunities, and diversion of management’s attention. Managing an acquired business, disposing of product technologies, or reducing personnel entails numerous operational and financial risks, including difficulties in assimilating acquired operations and new personnel or separating existing business or product groups, diversion of management’s attention away from other business concerns, amortization of acquired intangible assets, adverse customer reaction to our decision to cease support for a product, and potential loss of key employees or customers of acquired or disposed operations. There can be no assurance that we will be able to achieve and manage successfully any such integration of potential acquisitions, disposition of product lines or technologies, or reduction in personnel, or that our management, personnel, or systems will be adequate to support continued operations. Any such inabilities or inadequacies could have a material adverse effect on our business, operating results, financial condition, and/or cash flows.

Current wording

Lam Research Corporation 2025 10-K 20 technologies, or reducing personnel entails numerous operational and financial risks, including difficulties in assimilating acquired operations and new personnel or separating existing business or product groups, diversion of management’s attention away from other business concerns, amortization of acquired intangible assets, adverse customer reaction to our decision to cease support for a product, and potential loss of key employees or customers of acquired or disposed operations. There can be no assurance that we will be able to achieve and manage successfully any such integration of potential acquisitions, disposition of product lines or technologies, or reduction in personnel, or that our management, personnel, or systems will be adequate to support continued operations. Any such inabilities or inadequacies could have a material adverse effect on our business, operating results, financial condition, and/or cash flows.

Previous wording

China represents a large and fast-developing market for the semiconductor equipment industry and therefore is important to our business. Revenue in China, which includes global customers and domestic Chinese customers with manufacturing facilities in China, represented approximately 42%, 26%, and 31% of our total revenue for fiscal years 2024, 2023, and 2022, respectively. The U.S. and China have historically had a complex relationship that has included actions that have impacted trade between the two countries. In recent years, these actions have included an expansion of export license requirements imposed by the U.S. government, which have limited the market for our products, adversely impacted our revenues, and increased our exposure to foreign competition, and could potentially do so to an even greater extent in the future. Additionally, the U.S. government has enacted new rules aimed at restricting China’s ability to manufacture advanced semiconductors, which include restrictions on exports, reexports or transfers to, or shipping, transmitting, transferring, or facilitating such movement to, or performing services at, customer facilities in China engaged in certain technology end-uses, without appropriate authorizations obtained from U.S. authorities. The U.S. Department of Commerce has also enacted rules that have expanded export license requirements for U.S. companies to sell certain items to companies and other end-users in China that are designated as military end-users or have operations that could support military end uses; has added additional Chinese companies to its restricted entity list and unverified list under suspicion of military-civil fusion, support of Russia, or other factors associated with a broadening scope of national security concerns; and has expanded an existing rule (referred to as the foreign direct product rule) in a manner that could cause foreign-made wafers, chipsets, and certain related items produced with many of our products to be subject to U.S. licensing requirements if Huawei Technologies Co. Ltd (“Huawei”) or its affiliates are parties to a transaction involving the items. These rules have required and may require us to apply for and obtain additional export licenses to supply certain of our products to customers in China, and there is no assurance that we will be issued licenses that we apply for on a timely basis or at all. In addition, our customers (including, but not limited to, Chinese customers) may require U.S. export licenses for the use of our products in order to manufacture products, including semiconductor wafers and integrated circuits, for those of their customers (i.e. Huawei and its affiliates) that are subject to the expanded foreign direct product rule, which may adversely impact the demand for our products. The U.S. Department of Commerce could in the future add additional Chinese companies to its restricted entity list or unverified list or take other actions that could expand licens…

Excerpt shortened here; the source contains the full paragraph.

Current wording

China represents a large and fast-developing market for the semiconductor equipment industry and therefore is important to our business. Revenue in China, which includes global customers and domestic Chinese customers with manufacturing facilities in China, represented approximately 34%, 42%, and 26% of our total revenue for fiscal years 2025, 2024, and 2023, respectively. The U.S. and China have historically had a complex relationship that has included actions that have impacted trade between the two countries. In recent years, these actions have included an expansion of export license requirements imposed by the U.S. government, which have limited the market for our products, adversely impacted our revenues, and increased our exposure to foreign competition, and could potentially do so to an even greater extent in the future. Additionally, the U.S. government has enacted new rules aimed at restricting China’s ability to manufacture advanced semiconductors, which include restrictions on exports, reexports or transfers to, or shipping, transmitting, transferring, or facilitating such movement to, or performing services at, customer facilities in China engaged in certain technology end-uses, without appropriate authorizations obtained from U.S. authorities. The U.S. Department of Commerce has also enacted rules that have expanded export license requirements for U.S. companies to sell certain items to companies and other end-users in China that are designated as military end-users or have operations that could support military end uses; has added additional Chinese companies to its restricted entity list and unverified list under suspicion of military-civil fusion, support of Russia, or other factors associated with a broadening scope of national security concerns; and has expanded an existing rule (referred to as the foreign direct product rule) in a manner that could cause foreign-made wafers, chipsets, and certain related items produced with many of our products to be subject to U.S. licensing requirements if Huawei Technologies Co. Ltd (“Huawei”) or its affiliates are parties to a transaction involving the items. These rules have required and may require us to apply for and obtain additional export licenses to supply certain of our products to customers in China, and there is no assurance that we will be issued licenses that we apply for on a timely basis or at all. In addition, our customers (including, but not limited to, Chinese customers) may require U.S. export licenses for the use of our products in order to manufacture products, including semiconductor wafers and integrated circuits, for those of their customers (i.e. Huawei and its affiliates) that are subject to the expanded foreign direct product rule, which may adversely impact the demand for our products. The U.S. Department of Commerce could in the future add additional Chinese companies to its restricted entity list or unverified list or take other actions that could expand licens…

Excerpt shortened here; the source contains the full paragraph.

Previous wording

Third parties may assert infringement, misappropriation, unfair competition, product liability, breach of contract, or other claims against us. From time to time, other persons send us notices alleging that our products infringe or misappropriate their patent or other intellectual property rights. In addition, law enforcement authorities may seek criminal charges relating to intellectual property or other issues. We also face risks of claims arising from commercial and other relationships. In addition, our bylaws and other indemnity obligations provide that we will indemnify officers and members of our Board of Directors against losses that they may incur in legal proceedings resulting from their service to us. From time to time, in the normal course of business, we indemnify third parties with whom we enter into contractual relationships, including customers and suppliers, with respect to certain matters. We have agreed, under certain conditions, to hold these third parties harmless against specified losses, such as those arising from a breach of representations or covenants, other third-party claims that our products when used for their intended purposes infringe the intellectual

Current wording

Third parties may assert infringement, misappropriation, unfair competition, product liability, breach of contract, or other claims against us. From time to time, other persons send us notices alleging that our products infringe or misappropriate their patent or other intellectual property rights. In addition, law enforcement authorities may seek criminal charges relating to intellectual property or other

Previous wording

Lam Research Corporation 2024 10-K 21 property rights of such other third parties, or other claims made against certain parties. In such cases, it is our policy either to defend the claims or to negotiate licenses or other settlements on commercially reasonable terms. However, we may be unable in the future to negotiate necessary licenses or reach agreement on other settlements on commercially reasonable terms, or at all, and any litigation resulting from these claims by other parties may materially and adversely affect our business and financial results, and we may be subject to substantial damage awards and penalties. Moreover, although we have insurance to protect us from certain claims and cover certain losses to our property, such insurance may not cover us for the full amount of any losses, or at all, and may be subject to substantial exclusions and deductibles.

Current wording

Lam Research Corporation 2025 10-K 21 issues. We also face risks of claims arising from commercial and other relationships. In addition, our bylaws and other indemnity obligations provide that we will indemnify officers and members of our Board of Directors against losses that they may incur in legal proceedings resulting from their service to us. From time to time, in the normal course of business, we indemnify third parties with whom we enter into contractual relationships, including customers and suppliers, with respect to certain matters. We have agreed, under certain conditions, to hold these third parties harmless against specified losses, such as those arising from a breach of representations or covenants, other third-party claims that our products when used for their intended purposes infringe the intellectual property rights of such other third parties, or other claims made against certain parties. In such cases, it is our policy either to defend the claims or to negotiate licenses or other settlements on commercially reasonable terms. However, we may be unable in the future to negotiate necessary licenses or reach agreement on other settlements on commercially reasonable terms, or at all, and any litigation resulting from these claims by other parties may materially and adversely affect our business and financial results, and we may be subject to substantial damage awards and penalties. Moreover, although we have insurance to protect us from certain claims and cover certain losses to our property, such insurance may not cover us for the full amount of any losses, or at all, and may be subject to substantial exclusions and deductibles.

Previous wording

We are subject to various risks related to (1) new, different, inconsistent, or even conflicting laws, rules, and regulations that may be enacted by legislative or executive bodies and/or regulatory agencies in the countries that we operate; (2) disagreements or disputes related to international trade; and (3) the interpretation and application of laws, rules, and regulations. As a public company with global operations, we are subject to the laws of multiple jurisdictions and the rules and regulations of various governing bodies, including those related to export controls, financial and other disclosures, corporate governance, privacy, anti-corruption, such as the Foreign Corrupt Practices Act and other local laws prohibiting corrupt payments to governmental officials, anti-boycott compliance, conflict minerals or other social responsibility legislation, immigration or travel regulations, antitrust regulations, and laws or regulations relating to carbon emissions, as well as other laws or regulations imposed in response to climate change concerns, among others. Each of these laws, rules, and regulations imposes costs on our business, including financial costs and potential diversion of our management’s attention associated with compliance, and may present risks to our business, including potential fines, restrictions on our actions, and reputational damage if we do not fully comply.

Current wording

We are subject to various risks related to (1) new, different, inconsistent, or even conflicting laws, rules, and regulations that may be enacted by legislative or executive bodies and/or regulatory agencies in the countries that we operate; (2) disagreements or disputes related to international trade; and (3) the interpretation and application of laws, rules, and regulations. As a public company with global operations, we are subject to the laws of multiple jurisdictions and the rules and regulations of various governing bodies, including those related to export controls, financial and other disclosures, corporate governance, privacy, anti-corruption, such as the Foreign Corrupt Practices Act and other local laws prohibiting corrupt payments to governmental officials, anti-boycott compliance, conflict minerals or other social responsibility legislation, immigration or travel regulations, antitrust regulations, and laws or regulations relating to carbon emissions such as the recent reporting requirements imposed by the State of California that will require corporations to provide climate-related disclosures, as well as other laws or regulations imposed in response to climate change concerns, among others. Each of these laws, rules, and regulations imposes costs on our business, including financial costs and potential diversion of our management’s attention associated with compliance, and may present risks to our business, including potential fines, restrictions on our actions, and reputational damage if we do not fully comply.

Previous wording

•economic or political events, trends, and unexpected developments occurring nationally, globally, or in any of our key sales regions;

Current wording

•economic or political events, trends, and unexpected developments occurring nationally, globally, or in any of our key sales regions such as uncertainty regarding economic and other policies and priorities;

Previous wording

•macroeconomic, industry and market conditions, including those caused by the Russian invasion of Ukraine, conflict in the Middle East, or bank failures; and geopolitical issues;

Current wording

•macroeconomic, industry and market conditions, including those caused by war, conflict in the Middle East or elsewhere, or bank failures; and geopolitical issues;

Previous wording

We have $5.0 billion in aggregate principal amount of senior unsecured notes outstanding (the “Senior Notes”). Additionally, we have funding available to us under our $1.5 billion commercial paper program and our $1.5 billion revolving credit facility, which serves as a backstop to our commercial paper program. Our revolving credit facility also includes an option to increase the amount up to an additional $600.0 million, for a potential total commitment of $2.1 billion. We may, in the future, decide to enter into additional debt arrangements.

Current wording

We have $4.5 billion in aggregate principal amount of senior unsecured notes outstanding (the “Senior Notes”). Additionally, we have funding available to us under our $1.5 billion commercial paper program and our $2.0 billion revolving credit facility, which serves as a backstop to our commercial paper program. Our revolving credit facility also includes an option to increase the amount up to an additional $750.0 million, for a potential total commitment of $2.75 billion. We may, in the future, decide to enter into additional debt arrangements.

Previous wording

As part of our hedging activities, we enter into transactions involving derivative financial instruments, which may include forward contracts, option contracts, collars and swaps with various financial institutions. In addition, we have significant amounts of cash, cash equivalents and other investments on deposit or in accounts with banks or other financial institutions both in and out of the United States. As a result, we are exposed to the risk of default by or failure of counterparty financial institutions, which may be heightened during economic downturns and periods of uncertainty in the financial markets. If one of our counterparties were to become insolvent or file for bankruptcy, our ability to recover losses incurred as a result of default, or our assets deposited or held in accounts with such counterparty, may be limited by the counterparty's liquidity or the applicable laws governing the insolvency or bankruptcy proceedings. In the event of default or failure of one or more of our counterparties, we could incur significant losses, which could negatively impact our results of operations and financial condition.

Current wording

As part of our hedging activities, we enter into transactions involving derivative financial instruments, which may include forward contracts, option contracts, collars and swaps with various financial institutions. In addition, we have significant amounts of cash, cash equivalents and other investments on deposit or in accounts with banks or other financial institutions both in and out of the United States. As a result, we are exposed to the risk of default by or failure of counterparty financial institutions, which may be heightened during economic downturns and periods of uncertainty in the financial markets. If one of our counterparties were to