HF Sinclair Corp

Within this report, the following terms have these specific meanings:

“Alkylation” means the reaction of propylene or butylene (olefins) with isobutane to form an iso-paraffinic gasoline (inverse of cracking).

“BPD” means the number of barrels per calendar day of crude oil or petroleum products.

“BPSD” means the number of barrels per stream day (barrels of capacity in a 24 hour period) of crude oil or petroleum products.

“Base oil” is a lubricant grade oil initially produced from refining crude oil or through chemical synthesis that is used in producing lubricant products such as lubricating greases, motor oil and metal processing fluids.

“Biodiesel” means a clean alternative fuel produced from renewable biological resources.

“Black wax crude oil” is a low sulfur, low gravity crude oil produced in the Uintah Basin in Eastern Utah that has certain characteristics that require specific facilities to transport, store and refine into transportation fuels.

“Catalytic reforming” means a refinery process which uses a precious metal (such as platinum) based catalyst to convert low octane naphtha to high octane gasoline blendstock and hydrogen. The hydrogen produced from the reforming process is used to desulfurize other refinery oils and is a primary source of hydrogen for the refinery.

“Cracking” means the process of breaking down larger, heavier and more complex hydrocarbon molecules into simpler and lighter molecules.

“Crude oil distillation” means the process of distilling vapor from liquid crudes, usually by heating, and condensing the vapor slightly above atmospheric pressure turning it back to liquid in order to purify, fractionate or form the desired products.

“Ethanol” means a high octane gasoline blend stock that is used to make various grades of gasoline.

“FCC,” or fluid catalytic cracking, means a refinery process that breaks down large complex hydrocarbon molecules into smaller more useful ones using a circulating bed of catalyst at relatively high temperatures.

“Gas oil” is a group of petroleum distillation products having boiling points between kerosene and lubricating oil and is used as fuel in construction and agricultural machinery.

“Hydrodesulfurization” means to remove sulfur and nitrogen compounds from oil or gas in the presence of hydrogen and a catalyst at relatively high temperatures.

“Hydrogen plant” means a refinery unit that converts natural gas and steam to high purity hydrogen, which is then used in the hydrodesulfurization, hydrocracking and isomerization processes.

“HF alkylation” or hydrofluoric alkylation, means a refinery process which combines isobutane and C3/C4 olefins using hydrofluoric acid as a catalyst to make high octane gasoline blend stock.

“Isomerization” means a refinery process for rearranging the structure of C5/C6 molecules without changing their size or chemical composition and is used to improve the octane of C5/C6 gasoline blendstocks.

“LPG” means liquid petroleum gases.

“Lubricant” or “lube” means a solvent neutral paraffinic product used in commercial heavy duty engine oils, passenger car oils and specialty products for industrial applications such as heat transfer, metalworking, rubber and other general process oil.

“MEK” means a lube process that separates waxy oil from non-waxy oils using methyl ethyl ketone as a solvent.

“MSAT2”means Control of Hazardous Air Pollutants from Mobile Sources, a rule issued by the U.S. Environmental Protection Agency (the “EPA”) to reduce hazardous emissions from motor vehicles and motor vehicle fuels.

“MMBTU” means one million British thermal units.

“Natural gasoline” means a low octane gasoline blend stock that is purchased and used to blend with other high octane stocks produced to make various grades of gasoline.

“Refinery gross margin” means the difference between average net sales price and average cost per barrel sold. This does not include the associated depreciation and amortization costs.

“Reforming” means the process of converting gasoline type molecules into aromatic, higher octane gasoline blend stocks while producing hydrogen in the process.

“Renewable diesel” means a diesel fuel derived from renewable feedstock such as vegetable oils or animal fats that is produced through various processes, most commonly through hydrotreating, reacting the feedstock with hydrogen under temperatures and pressure in the presence of a catalyst.

“RINs” means renewable identification numbers and refers to serial numbers assigned to credits generated from renewable fuel production under the EPA’s Renewable Fuel Standard (“RFS”) regulations, which require blending renewable fuels into the nation's fuel supply. In lieu of blending, refiners may purchase these transferable credits in order to comply with the regulations.

“Roofing flux”is produced from the bottom cut of crude oil and is the base oil used to make roofing shingles for the housing industry.

“ROSE,” or“Solvent deasphalter / residuum oil supercritical extraction,” means a refinery unit that uses a light hydrocarbon like propane or butane to extract non-asphaltene heavy oils from asphalt or atmospheric reduced crude. These deasphalted oils are then further converted to gasoline and diesel in the FCC process. The remaining asphaltenes are either sold, blended to fuel oil or blended with other asphalt as a hardener.

“Scanfiner” is a refinery unit that removes sulfur from gasoline to produce low sulfur gasoline blendstock.

“Sour crude oil” means crude oil containing quantities of sulfur greater than 0.4 percent by weight, while “sweet crude oil” means crude oil containing quantities of sulfur equal to or less than 0.4 percent by weight.

“Vacuum distillation” means the process of distilling vapor from liquid crudes, usually by heating, and condensing the vapor below atmospheric pressure turning it back to a liquid in order to purify, fractionate or form the desired products.

“White oil”is an extremely pure, highly-refined petroleum product that has a wide variety of applications ranging from pharmaceutical to cosmetic products.

“WTI”means West Texas Intermediate and is a grade of crude oil used as a common benchmark in oil pricing. WTI is a sweet crude oil and has a relatively low density.