BIOMERICA INC

BUSINESS OVERVIEW

THE COMPANY

We are a global biomedical technology company that develops, patents, manufactures and markets advanced diagnostic and therapeutic products. Our diagnostic test kits are used to analyze blood, urine, nasal, or fecal material from patients in the diagnosis of various diseases, food intolerances, and other medical complications. They can also be used to measure or detect the presence and levels of specific bacteria, hormones, antibodies, antigens and other substances, which may exist in the human body in extremely small concentrations. Our products are designed to enhance the health and well-being of people, while reducing total healthcare cost.

Our extensive range of medical diagnostic products is sold worldwide, primarily in two markets: clinical laboratories and point-of-care settings. Most of our products are Conformite Europeenne (“CE”) marked and/or registered with regulatory agencies in various countries for diagnostic use, with several also cleared by the U.S. Food and Drug Administration (“FDA”) for sale in the United States.

TECHNOLOGICAL ADVANCEMENTS AND PRODUCT DEVELOPMENT

Technological advances in medical diagnostics have enabled diagnostic tests to be performed not only in clinical laboratories but also at home and at the point-of-care in physicians’ offices. One of our key objectives has been to develop and market rapid diagnostic tests that are accurate, utilize easily obtained patient specimens, and are simple to perform without the need for complex instrumentation. Our home use (over-the-counter) and professional use (physicians’ office, clinics, etc.) rapid diagnostic test products help manage existing medical conditions and may save lives through early detection and diagnosis of specific diseases. Traditionally, such tests required the expertise of medical technologists and sophisticated equipment, with results often not available for days. We believe our rapid point-of-care tests, when properly used, can be as accurate as laboratory tests. Our products require limited to no instrumentation, deliver reliable results in minutes, and can be performed with confidence at home or in a physician’s office.

RESEARCH AND DEVELOPMENT

We invest resources in the research and development of new products designed to diagnose and, in some cases, treat several major medical diseases. These products are either internally developed or licensed from others. Our experienced and highly trained technical personnel, including Ph.D. holders and other scientists, are dedicated to developing new products and managing technology transfer activities. Our technical staff, many of whom, have extensive experience from previous employment at large diagnostic manufacturing companies, bring a wealth of industry knowledge. Additionally, we rely on our Scientific Advisory Board, comprised of leading medical doctors and clinicians, to guide our clinical studies and product development efforts.

For the fiscal years ended May 31, 2025 and 2024, consolidated research and development expenses totaled approximately $1,023,000 and $1,491,000, respectively. The decrease reflects our transition from intensive product development to the commercialization phase of inFoods® IBS and hp+detect™, as well as our broader efforts to manage costs and preserve cash.

Beyond IBS, we are pursuing additional applications for the inFoods® technology for other disease states, including Functional Dyspepsia, Crohn’s Disease, Ulcerative Colitis, Gastroesophageal Reflux Disease (“GERD”), Migraine Headaches, Depression, and Osteoarthritis. We have filed patents globally to protect the use of inFoods® diagnostic technology for these indications, with patents issued in the United States and multiple foreign jurisdictions, and others in review or prosecution.

Our research and development efforts have also led to the FDA 510(k) clearance of hp+detect™, a proprietary diagnostic test for detecting Helicobacter pylori (H. pylori) and monitoring treatment. H. pylori is a leading cause of peptic ulcers and a significant risk factor for gastric cancer. While commercialization activities for hp+detect™ are at an early stage, we continue to position the product as a reliable diagnostic option for laboratories and physicians.

KEY PRODUCT LAUNCHES

A key outcome from our research and development efforts is our patented diagnostic-guided therapy (“DGT”) product, developed on the inFoods® technology platform. This innovative technology is designed to aid in the management of gastrointestinal conditions such as irritable bowel syndrome (“IBS”) and other inflammatory diseases. The DGT product targets chronic inflammatory illnesses that are widespread and prevalent in large markets. We have launched inFoods® IBS product, which leverages this pateneted technology. The inFoods® IBS product utilizes a simple blood test to identify patient-specific foods that, when eliminated from the diet, may help reduce IBS symptoms such as pain, bloating, diarrhea, cramping, and constipation. Unlike broad and difficult to manage dietary restrictions, the inFoods® IBS product pinpoints a patient’s heightened immunoreactivity to specific foods known to frequently trigger IBS symptoms. By removing the foods identified as problematic, patients can achieve relief from IBS symptoms.

We have introduced our inFoods® product to gastroenterology (“GI”) physician groups in multiple states and regions, including collaboration with one of the largest GI groups in the U.S. The initial phase was focused on gathering real world feedback, optimizing physician engagement, and validating operational processes. GI physician feedback has been generally positive, and we are continuing to expand our presence in the GI segment while exploring opportunities to bring the inFoods® technology to other medical specialties. The outcome of our clinical study was published in the June 2025 issue of Gastroenteroloy. We are also assessing distribution, partnership, and licensing opportunities with large U.S. distributors to support broader availability and sale/marketing. We are actively pursuing insurance reimbursement for the InFoods IBS product in conjunction with our CLIA laboratory partner.

As we continue pursue commercial opportunities in both U.S. and international markets, we remain attentive to evolving global economic conditions, including uncertainties related to international trade policies, tariffs, and supply chain dynamics. Although these factors have not had a material impact on our operations to date, future changes in trade regulations, tariff structures, or logistical constraints could influence the cost, availability, or timing of materials and components used in our manufacturing processes. We continue to monitor these developments closely and are actively implementing contingency plans, including alternative sourcing strategies and supplier diversification, to support supply chain continuity, maintain operational efficiency, and help mitigate potential future impacts. We are also focusing on alternative manufacturing and shipping strategies of our products through our European subsidiary (BioEurope), and our Mexican subsidiary (BioMexico), to mitigate some of the risk these policies may have on our revenues and operations.

In addition, in December 2023 we received FDA clearance for hp+detect™, a diagnostic test designed to detect Helicobacter pylori (H. pylori) bacteria in the gastrointestinal tract. H. pylori is a prevalent infection, affecting approximately 35% of the U.S. population and 45% of the population in Europe’s largest countries. This bacterium is recognized as the strongest known risk factor for gastric cancer, which remains one of the leading causes of cancer-related deaths globally. The hp+detect™ test is marketed directly to laboratories and is intended to provide physicians and medical centers with a reliable tool for diagnosing H. pylori infections and monitoring treatment effectiveness. We are currently in discussions with large end-customer laboratories for our hp+detect™ to position it for commercial adoption.

STRATEGIC INITIATIVES AND COST MANAGEMENT

As part of our ongoing commitment to operational efficiency and disciplined capital management, we have taken proactive steps to optimize our cost structure and extend our cash runway. These actions, which include a workforce reduction of approximately 15% during this fiscal year, which incurred costs such as severance, impacting typical cost trends and margins. Additionally, we raised $2,015,000 in net proceeds from the ATM offering filed in May 2024 , providing additional liquidity to support our operations. We are actively exploring strategic opportunities to enhance and create shareholder value.

OPERATIONS AND GLOBAL PRESENCE

Biomerica is headquartered in Irvine, California, where it centralizes administration, finance, regulatory compliance, product development, sales, marketing, customer service, and primary manufacturing operations. To enhance global competitiveness, the Company maintains manufacturing and assembly operations in Mexicali, Mexico, aiming to reduce production costs. Additionally, Biomerica operates BioEurope GmbH in Europe, facilitating the international sales of specific products.

Additional information about Biomerica is available on our website at www.biomerica.com. The content on any website referred to in this Form 10-K is not a part of or incorporated by reference in this Form 10-K unless expressly noted. Our Annual Report on Form 10-K, Quarterly Reports on Forms 10-Q, Current Reports on Forms 8-K, Proxy Statements and all other filings we make with the Securities and Exchange Commission (“SEC”) are available on our website, free of charge, as soon as reasonably practical after we file them with or furnish them to the SEC and are also available online at the SEC’s website atwww.sec.gov.

PRODUCTION

Our diagnostic test kits are manufactured and/or assembled at our facilities in Irvine, California, and in Mexicali, Mexico. We established our manufacturing facility in Mexicali, Mexico, in fiscal 2003 and moved a significant portion of our diagnostic packaging and assembly to that facility.

Production of diagnostic tests can involve formulating component antibodies and antigens in specified concentrations, attaching a tracer to the antigen, filling components into vials, packaging and labeling. We continually engage in quality control procedures to assure the consistency and quality of our products and to comply with applicable FDA and international regulations.

Our manufacturing operations and facilities are regulated by the FDA Current Good Manufacturing Practices for medical devices. We have an internal quality department that monitors and evaluates product quality and output. We also have an internal Quality Systems department whose goal is to ensure that our operating procedures are in compliance with current FDA, CE Mark and International Organization for Standardization (“ISO”) regulations. We either produce our own antibodies and antigens or purchase these materials from qualified vendors. We have alternate, approved sources for most critical raw materials and are working to procure alternate sources for the few that we do not have.

MARKETS AND METHODS OF DISTRIBUTION

Biomerica has approximately 76 current customers for its diagnostic business, of which approximately 34 are foreign distributors, 4 are domestic distributors and the balance are primarily domestic hospital and clinical laboratories, medical research institutions, medical schools, pharmaceutical companies, chain drugstores, wholesalers, physicians’ offices, and e-commerce customers.

We employ a director of sales and marketing for Europe and South America who is headquartered in Germany. She has over 20 years of experience selling and marketing diagnostic and life science products across multiple diagnostics technologies and disciplines. She possesses broad international business experience, with communication skills in German, English, Spanish, French, and Portuguese, and scientific and technical understanding of gastrointestinal diagnostic products. She also has strong relationships with key strategic entities in Europe, Eastern Europe, Latin America, Canada, and the United States and we expect that she will continue to help us add new distributors for existing products and add new product-lines for future distribution by us.

We rely on distributors, advertising in medical and trade journals, exhibitions at trade shows, direct mailings, and an internal sales staff to market our diagnostic products. We target two main markets: (a) clinical laboratories and (b) point-of-care testing (physicians’ offices and over-the-counter drug stores).

Our net sales were approximately $5,311,000 for fiscal year ended May 31, 2025, compared to $5,415,000 for fiscal year ended May 31, 2024. For the fiscal years ended May 31, 2025, and 2024, the Company had one distributor each year that accounted for 31% and 33% of our net sales, respectively.

Total gross receivables were approximately $757,000 and $966,000 as of May 31, 2025 and 2024, respectively. As of those dates, four distributors accounted for approximately 69% and 64% of gross accounts receivable, respectively. Of the 69% concentration as of May 31, 2025, 27% was attributable to a distributor located in North America.

BACKLOG

As of May 31, 2025, and 2024, Biomerica’s backlog of unshipped orders was approximately $1,324,000 and $755,000, respectively. As of May 31, 2025, the majority of this backlog consisted of orders intended for shipment to Asia.

RAW MATERIALS

Biomerica utilizes a range of principal raw materials including chemicals, serums, reagents, and packaging supplies. The majority of these materials are sourced from multiple suppliers, ensuring we are not reliant on any single source. However, for certain critical materials such as antibodies, where suppliers are limited, there exists a risk of potential supply challenges or increased costs in the future.

Our inventory includes antibodies, antigens, bottles, boxes, chemicals, and reagents essential for manufacturing our test kits, along with products in various stages of completion.

For the fiscal year ended May 31, 2025, purchases from one vendor accounted for approximately 12% of our total raw material procurement, primarily related to commodity plastic products. For the fiscal year ended May 31, 2024, purchases from one vendor accounted for approximately 16% of our total raw material procurement, also primarily related to commodity plastic products.

COMPETITION

We offer several proprietary products with notable competitive advantages, including our EZ Detect colon disease home test, Aware Breast Self-Exam product, inFoods® IBS product, and hp+detect™ for H. pylori detection. These products stand out due to their unique features and benefits compared to competing tests in the market.

Our competitors vary greatly in size. Many are divisions or subsidiaries of well-established medical and pharmaceutical companies which are much larger than Biomerica and expend substantially greater amounts than we do for research and development, manufacturing, advertising, and marketing.

The competitive landscape for diagnostic products is shaped by several factors, including product uniqueness, technology, quality, performance, pricing, and service. Our competitive edge is grounded in the distinctiveness of our offerings, the high quality of our products, and their rapid test results. Our strong patent portfolio further bolsters our market position despite our limited marketing capabilities.

GOVERNMENT REGULATION OF OUR DIAGNOSTIC BUSINESS

Our primary business consists of selling products that are generally legally defined as medical devices and in vitro diagnostic medical devices. As a result, we are a medical devices and in vitro diagnostic medical devices manufacturer, and as such, we are subject to the regulations issued and enforced by of numerous governmental entities. These agencies include the FDA, Environmental Protection Agency, Federal Trade Commission, Occupational Safety and Health Administration, U.S. Department of Agriculture (“USDA”), and Consumer Product Safety Commission, as well as certain European Government agencies. Our activities are also regulated by various agencies of the states and localities in which our products are sold. These regulations govern the introduction of new in vitro diagnostic medical devices and other medical devices, the observance of certain standards with respect to the manufacture and labeling of medical devices, the maintenance of certain records, the reporting of potential product problems, and other related matters.

The Food, Drug & Cosmetic Act of 1938 (the “FDCA”) regulates medical devices in the United States by classifying them into one of three classes based on the extent of regulation believed necessary to ensure safety and effectiveness. Class I devices are those devices for which safety and effectiveness can reasonably be assured through general controls, such as device listing, adequate labeling, and adherence to the Quality Management System Regulation (“QMSR”) as well as Medical Device Reporting (“MDR”), labeling and other regulatory requirements. Some Class I medical devices are exempt from the requirement of Pre-Market Notification or clearance. Class II devices are those devices for which safety and effectiveness can reasonably be ensured through using special controls, such as performance standards, post-market surveillance and patient registries, as well as adherence to the general controls’ provisions applicable to Class I devices. Class III devices are devices that generally must receive clearance by the FDA pursuant to a pre-market approval prior to marketing to ensure their safety and effectiveness. Generally, Class III devices are limited to life-sustaining, life-supporting, or implantable devices. However, this classification can also apply to novel technology or new intended uses or applications for existing devices. Our products are primarily either Class I or Class II medical devices.

Pursuant to FDA requirements, we have registered our manufacturing facility with the FDA as a medical device manufacturer and listed the medical devices we manufacture. We are also subject to inspection on a routine basis for compliance with FDA regulations. This includes the Quality System Regulation (“QSR”), which requires that we manufacture our products and maintain our documents in a prescribed manner with respect to issues such as design controls, manufacturing, testing, and validation activities. Further, we are required to comply with other FDA requirements with respect to labeling and MDR regulations which requires that we provide information to the FDA on deaths or serious injuries alleged to have been associated with the use of our products, as well as any product malfunctions that are likely to cause or contribute to death or serious injury if the malfunction were to recur. We believe that we are currently in material compliance with all relevant QSR and MDR requirements.

In addition, our facility is required to have a California Medical Device Manufacturing License. The license is not transferable and must be renewed biannually. Our current license is valid until November 19, 2026. Through compliance with FDA and California regulations, we can market some of our medical devices throughout the United States. International sales of medical devices are also subject to the regulatory requirements of each country where the product is sold. In Europe, the directives of the European Union (“EU”) require that a device has a CE Mark in order to be sold in EU countries. We comply with In Vitro Diagnostic Medical Devices Directive (“IVDD”) 98/79/EC, Medical Devices Regulation (EU) 2017/745 MDR and In Vitro Diagnostic Medical Devices Regulation (EU) 2017/746) (“IVDR”). We also comply with ISO 13485:2016 Medical Devices Quality Management Systems – Requirements for Regulatory Purposes and EN ISO 14971:2019.

At present, outside of the EU, the international regulatory review process varies from country to country. We work with our distributors and sales representatives in the foreign countries in which we market our products to ensure that we comply with the regulatory laws of those countries. We believe that our international sales to date have been in compliance with the laws of all foreign countries in which we have made sales. Exports of most medical devices are also subject to certain FDA regulatory controls.

The designing, development, manufacturing, marketing, post-market surveillance, distribution, advertising, and labeling of our immunoassay in vitro diagnostic (“IVD”) medical device products are subject to regulation in the United States by the Center for Devices and Radiological Health of the FDA and state agencies. FDA regulations require that some new products have pre-marketing clearance or approval by the FDA and require these products to be manufactured in accordance with the FDA’s current Good Manufacturing Practice (“cGMP”) regulations, to be extensively tested and to be properly labeled to disclose test results and performance claims and limitations. After a product that is subject to FDA regulation is placed on the market, numerous regulatory requirements apply, including, for example, the requirement that we comply with recordkeeping and reporting requirements, such as the FDA’s medical device reporting regulations and reporting of corrections and removals. The FDA enforces these requirements by inspection and post-market surveillance. The last FDA-announced inspection was in May 2024 and no observations were noted. We believe that all our products sold in the United States comply with the FDA and applicable state regulations.

We are an FDA-regulated and ISO 13485:2016-certified In Vitro Diagnostic Medical Devices company. Our goal is to provide high quality medical diagnostic products that generally meet or exceed customer requirements and comply with all applicable regulatory requirements: FDA 21 CFR Part 820 Quality Management System, ISO 13485:2016, Medical Devices Quality Management Systems – Requirements for Regulatory Purposes, In Vitro Diagnostic Medical Devices Directive 98/79/EC, Medical Device Regulation (EU) 2017/745 and In Vitro Diagnostic Medical Devices Regulation (EU) 2017/746) IVDR, Guidelines related to Medical Devices Directive/Regulation Guidance on CE Marking, among others. We involve our employees in a continuous improvement process to increase productivity, improve quality and maintain the suitability, adequacy, and effectiveness of our quality management system.

The EU In Vitro Diagnostic Medical Device Regulation (“IVDR”EU) 2017/746 was effective on May 26, 2022. Manufacturers need to update their technical documentation and processes to meet the more stringent regulatory requirements of the European Union. Notified Bodies can begin certifying devices to the new IVDR requirements once they have been designated under IVDR by their Competent Authority. Our Notified Body is officially designated under the IVDR and listed in the European Commission NANDO database since August 19, 2021. We are working closely with our Notified Body to update our technical documentation to comply with these more stringent IVDR requirements.

Per IVDR 2017/746 Amendment Regulation (EU) 2022/112, and published proposal 2024/0021 (COD), devices with a CE certificate that was issued in accordance with IVDD may be placed on the market or put into service until December 31, 2027, providing a formal application to the notified body has been made by May 26, 2025.

In accordance with the regulation, we submitted a formal application to the notified body by May 26, 2025.

Per IVDR 2017/746 Amendment Regulation (EU) 2022/112, and published proposal 2024/0021 (COD), devices without a CE certificate that was issued in accordance with IVDD, for which a declaration of conformity was drawn up prior to May 26, 2022, per IVDD and for which the conformity assessment procedure pursuant to IVDR requires the involvement of a Notified Body, may be placed on the market, or put into service until the following dates. We also have until the following dates to update the technical documentation and processes to meet these regulatory requirements of IVDR 2017/746 providing a formal application to the notified body has been made:

SEASONALITY OF BUSINESS

Our business has not been subject to significant seasonal fluctuations.

INTERNATIONAL BUSINESS

The following table sets forth the dollar volume of revenue attributable to sales to domestic customers and foreign customers during our last two fiscal years:

Our international operations face distinct risks that differ from those encountered in the United States. These risks include economic fluctuations, regulatory changes, geopolitical instability (such as terrorism and trade disputes), tariffs, embargoes, import/export restrictions, and potential disruptions in shipping and distribution channels. Such factors can significantly impact our foreign sales and may complicate our ability to collect accounts receivable in international markets during economic downturns.

Each country has its own licensing requirements for diagnostic products, which can differ considerably from U.S. regulations and may change unexpectedly. Currently, our international sales rely on approximately 38 independent distributors across around 30 countries. These diverse factors contribute to the complexities and uncertainties associated with our international business operations.

INTELLECTUAL PROPERTY

We consider the protection of our methodologies, designs, product formulations, manufacturing processes, diagnostic procedures, copyrights, service marks, trademarks, and trade secrets essential for our future success. To safeguard our proprietary rights in products and services, we utilize copyright, trademark, patent, service mark, and trade secret laws, alongside contractual restrictions. Our efforts include confidentiality and invention assignment agreements with employees and contractors, as well as nondisclosure agreements with most fulfilment and strategic partners to restrict access to and disclosure of proprietary information. However, these measures may not entirely prevent unauthorized use or disclosure of our technology.

In the past, we have licensed and may continue to license certain proprietary rights, such as trademarks, patents, trade secrets, or copyrighted material, to third parties. While we strive to maintain the quality of our product brands through these license agreements, we cannot guarantee that licensees will always act in a manner that preserves the value of our proprietary rights or reputation.

LICENSE OF THIRD-PARTY INTELLECTUAL PROPERTY

On occasion, we in-licensed both exclusive and non-exclusive rights to intellectual property and patents owned by third parties. These license agreements typically require royalties and other payments.

We have a royalty agreement in which we obtained rights to manufacture and market an Adrenocorticotropic Hormone test (“ACTH test”) (used to detect chronic metabolic conditions). Royalty expenses of approximately $7,000 and $10,000, respectively, are included in cost of sales for this agreement for the fiscal years ended May 31, 2025 and 2024. Sales of products manufactured under this agreement are not material to total sales for the fiscal years ended May 31, 2025 and 2024, respectively. We may license other products or technology in the future as it is deemed necessary or opportunistic for conducting business.

Some of the products that we manufacture, sell, or use may be covered by claims in issued patents held by other persons or entities, and as such, upon notice from such persons or entity we may be required to pay a license fee or may be required to cease all manufacture, sale or use of such products, which could negatively impact us. While we have not been notified of any such claims by third parties, we cannot guarantee that such claims will not be made in the future.

BRANDS AND TRADEMARKS

We occasionally register our tradenames with the United States Patent and Trademark Office (“USPTO”). Of note, we registered the tradename “InFoods” on December 24, 2016. Our unregistered tradenames are “EZ Detect,” “EZ-H.P.,” and “EZ-PSA”. A trademark for “Aware” was issued and assigned in 2001, renewed in 2011 and 2021. On January 11, 2020, the USPTO renewed our “FORTEL” trademark for another ten years.

The laws of some foreign countries do not protect our proprietary rights to the same extent as do the laws of the United States. Effective copyright, trademark, and trade secret protection may not be available in such jurisdictions.

PATENTS AND INFOODS TECHNOLOGY

We have filed dozens of international and Patent Corporation Treaty patents (“PCT”) and have multiple provisional and non-provisional patents currently filed with the USPTO. Substantially 15 of our patents that are pending or registered pertain to the inFoods®technology platform.

Our most important family of patent applications pertains to our inFoods® technology platform, which is a method of diagnosing and treating symptoms of many different inflammatory diseases. Our first product launch using this technology is the inFoods®IBS product which is designed to diagnose and treat IBS. Using a patient blood sample, a physician or lab can run our test to identify specific foods (e.g., pork, milk, onions, sugar, chickpeas) that, if eliminated from an IBS patient’s diet, can alleviate or reduce the individual’s IBS symptoms, including, but not limited to, constipation, diarrhea, bloating, cramping, severe pain, and indigestion. We have filed many patent applications with the USPTO and with other such similar agencies in other countries outside of the United States pertaining to this inFoods® technology. These patent applications include claims that address the diagnosis and treatment of several disease states including IBS, functional dyspepsia, Crohn’s disease, ulcerative colitis, gastroesophageal reflux disease, osteoarthritis, psoriasis, migraine headaches, and depression. The first inFoods® patents filed by us pertained to IBS. Several of these patents pertaining to the inFoods®IBS technology have been issued and many more are in active review and prosecution.

In August 2018, we received our first patent pertaining to the inFoods® technology platform from the Korean Intellectual Property Office, covering IBS. Since then, we have been granted a total of 15 patents. The USPTO has issued the Company two patents with broad claims that protect our inFoods® technology in testing and treating patients with IBS. Patents have also been issued in the countries of Australia, Canada, Japan (two patents), Korea (two patents), Mexico, Panama, Peru, and Singapore, covering our inFoods® IBS technology. Additional patent applications pertaining to the inFoods® IBS product are in prosecution and review at the USPTO and with the patent issuance authorities in other countries.

We are also developing and have filed patents with claims that cover products that target other diseases utilizing the inFoods®technology platform. We have dozens of patents that are issued, in prosecution or review, pertaining to these other diseases, including: Functional Dyspepsia, Crohn’s disease, Ulcerative Colitis, GERD, Migraine Headaches, Depression, and Osteoarthritis. In addition, we have a family of patents that cover the use of certain information technology (“IT”) platforms and artificial intelligence/machine learning (“AI/ML”) tools that could assist patients in identifying and avoiding packaged or processed food that contain specific foods that they are trying to eliminate from their diet.

In addition to our inFoods IBS related issued patents, we have also been issued inFoods® technology patents pertaining to the following diseases in the following jurisdictions:

We believe the claims in these issued inFoods® IBS patents and claims in our pending patents that protect the use of the inFoods® technology to diagnose and treat various other diseases, provide us with broad protections from other companies making or selling competing products in this highly disruptive new field of medicine.

In addition to the use of our own patents, we have been granted from third parties the rights to use, manufacture and sell certain products that are protected by patents or other intellectual property owned by these third parties. In some cases, royalties are paid on the sales of these products. We anticipate that we will license or purchase the rights to other products or technologies in the future.

We also engage in contract research and development and contract manufacturing for third party companies. The technologies that relate to this contract research and development and manufacturing are protected by patents and other intellectual property. In these situations, this intellectual property is typically licensed to us under a limited license agreement enabling us to perform the services being contracted.

With the launch of inFoods® IBS, our business model for this product includes the potential out-licensing of the product and related patents to a large international life sciences or technology company that could commercialize it or support us in its commercialization. Additionally, we may explore out-licensing opportunities for the patents or intellectual property associated with other products, including our H. pylori product.

EMPLOYEES

As of May 31, 2025 and 2024, we employed a total of 54 and 64 employees, respectively, in the United States, Mexico, UK and Germany, of which 53 and 63 were full-time employees, respectively.

We engage a range of external experts. including Ph.D.’s, M.D.’s, and other industry specialists, as well as medical institutions, to support various aspects of our operations. These services include technical support, regulatory guidance, marketing and public relations, financial advisory, and contract product development and manufacturing. To safeguard the Company, we implement confidentiality agreements, intellectual property ownership clauses, and indemnification provisions with these external parties. Despite these measures, we cannot guarantee complete protection against third-party claims or potential intellectual property theft.

CORPORATE HISTORY

Biomerica, Inc. is a Delaware corporation. The Company operates through two wholly owned subsidiaries: Biomerica de Mexico, which serves as an assembly and manufacturing facility, and BioEurope GmbH, which functions as a distributor of the Company’s products in international markets.